RoHS Single Port RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB DOWN 10/100/1000 Base-T Ethernet Application Meets IEEE 802.3 & ANSI X 3.263 standards Impedance: 100OHMS Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias Always EU RoHS/ELV Compliant, wave solder capable to 265°C RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Standard operating temp: 0ºC to +70ºC Electrical Speciļ¬cations @ 25°C Part Number ARA517-1002S OCL(uH min) Turns Ratio EMI @100KHz/0.1V chip: cable Fingers wi/ 8mA DC Bias (±3%) 350 1CT:1CT NO Insertion Loss (dB Max) LED (L/R) Return Loss (dB Min) 0.5-100MHz 0.5-40MHz 1.1 NO 18 Cross talk (dB Min) CMRR (dB Min) 40.1-100MHz 0.5-40MHz 40.1-100MHz 0.5-100MHz 12-20*LOG(f/80) 35 33-20*LOG(f/50) 30 HI-POT (VDC) 2250 All specifications subject to change without notice. MECHANICAL Unless otherwise specified all tolerances are: ±0.25 in mm 15.90 21.60Max 3.50 13.50 ARA517-1002S 3.05 8.89 2.54 ALLIED ARA517-1002S YYWW P10 P1 Back View 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 01/07/1115 www.alliedcomponents.com RoHS Single Port RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB DOWN SCHEMATICS ARA517-1002S Notes: 1.R1-R4=75OHMS,1/16W,5%Resistors. 2.C1=1000pF,2KV Decouping Capacitor. PCB LAYOUT Unless otherwise specified all tolerances are: ±0.05 in mm ARA517-1002S 9*1.27=11.43 2.54 2.54 1.27 8.89 1 9 10 3.05 2 11.43 15.49 MATERIALS ARA517-1002S Housing: PBT, Flammability Rating 94V-O. Shell: C2680 Brass, 0.20mm thick, 50u" Min nickel plating. Mod Jack Contacts: Phosphor Bronze, 0.35mm thick, 6u" Gold plated. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 01/07/11 15 www.alliedcomponents.com