RoHS Ganged 1x4 RJ45 CONNECTOR WITH INTEGRATED MAGNETICS, TAB DOWN 10/100/1000 Base-T Ethernet Application Meets IEEE 802.3 & ANSI X 3.263 standards Impedance: 100OHMS Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias Always EU RoHS/ELV Compliant, wave solder capable to 265°C Rise Time: 2.5 nano-seconds from 10 to 90 percent RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Standard operating temp: 0ºC to +70ºC (see footnote) Industrial operating temp: -40ºC to +85ºC (see footnote) Electrical Specifications @ 25°C Part Number ARA506-LJ02_ OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Turns Ratio chip: cable (±3%) 1CT:1CT Insertion Loss (dB Max) 0.5-100MHz 1.1 Return Loss (dB Min) 0.5-40MHz 18 40.1-100MHz 12-20*log(f/80) Electrical Specifications @ 25°C Part Number EMI Fingers LED (L/R) ARA506-LJ02_ YES NO Cross Talk (dB Min) 0.5-40MHz 40.1-100MHz 35 33-20*log(f/50) *Complete part number by inserting “S” for Standard Temp. or “I” for Industrial Temp. CMRR (dB Min) 0.5-100MHz HI-POT (VDC) 30 2250 All specifications subject to change without notice. MECHANICAL Unless otherwise specified all tolerances are: ±0.25 in mm ARA506-LJ02_ ALLIED ARA506-LJ02_ YYWW 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 151/06/11 www.alliedcomponents.com RoHS Ganged 1x4 RJ45 CONNECTOR WITH INTEGRATED MAGNETICS, TAB DOWN SCHEMATICS ARA506-LJ02_ VCC C2 C3 C4 C5 GND Notes: 1.R1-R4=75OHMS,1/16W,5%Resistors. 2.C1=1000pF,2KV Decouping Capacitor,C2-C5=0.01uF,50V,0603X7R Capacitor. PCB LAYOUT Unless otherwise specified all tolerances are: ±0.05 in mm ARA506-LJ02_ MATERIALS ARA506-LJ02_ Housing: PBT, Flammability Rating 94V-O. Shell: C2680 Brass, 0.20mm thick, 50u" Min nickel plating. Mod Jack Contacts: Phosphor Bronze, 0.35mm thick,6u" Gold plated. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 151/06/11 www.alliedcomponents.com