RoHS 1x4 Ganged RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB DOWN 10/100/1000 Base-T Ethernet Application Meets IEEE 802.3 & ANSI X 3.263 standards Impedance: 100OHMS Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias Always EU RoHS/ELV Compliant, wave solder capable to 265°C RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Standard operating temp: 0ºC to +70ºC Electrical Speciļ¬cations @ 25°C Part Number ARA502-5302S OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Insertion Loss (dB Max) 0.5-100MHz 1.1 Turns Ratio chip: cable (±3%) 1CT:1CT Return Loss (dB Min) 0.5-40MHz 18 40.1-100MHz 12-20*log(f/80) Electrical Speciļ¬cations @ 25°C Part Number EMI Fingers LED (L/R) ARA502-5302S NO NO Cross Talk (dB Min) 0.5-40MHz 40.1-100MHz 35 33-20*log(f/50) CMRR (dB Min) 0.5-100MHz HI-POT (VDC) 30 2250 All specifications subject to change without notice. MECHANICAL Unless otherwise specified all tolerances are: ±0.25 in mm ARA502-5302S ALLIED ARA502-5302S YYWW 59.15 [2.329] RJ8 3.6 [0.142] 21.6Max 13.5 [0.531] RJ1 10.8 [0.425] 53.34 [2.100] 3.05 [0.120] 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 1/06/11 15 2.54 [0.100] 8.89 [0.350] www.alliedcomponents.com RoHS 1x4 Ganged RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB DOWN SCHEMATICS ARA502-5302S Notes: 1. R1-R4=75OHMS,1/16W,5%Resistors. 2. C1=1000pF,2KV Decouping Capacitor. PCB LAYOUT Unless otherwise specified all tolerances are: ±0.05 in mm ARA502-5302S 58.95 [2.321] 340- 0.89 1.5 13.97 [0.550] 13.97 [0.550] 13.97 [0.550] 7 8.89 [0.350] 1.27 [0.050] 2- 1.63 8.89 [0.350] 10.29 [0.405] 3.05 [0.120] 53.34 [2.100] 6.35 [0.250] 2- 3.25 MATERIALS ARA502-5302S Housing: PBT, Flammability Rating 94V-O. Shell: C2680 Brass, 0.20mm thick, 50u" Min nickel plating. Mod Jack Contacts: Phosphor Bronze, 0.35mm thick, 6u" Gold plated. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 1/06/11 15 www.alliedcomponents.com