RoHS SMD SHIELDED POWER CHIP INDUCTOR Dimensions: Inches (mm) .177 Max (4.2 Max) .315±.008 (8.0±0.2) .091±.012 (2.3±0.3) XXX .315±.008 (8.0±0.2) PCSV80 .091±.012 (2.3±0.3) .248 Typ. (6.3 Typ.) Allied Part Number Inductance Tolerance (µh) (%) Test Freq. KHz, 1V RDC (mΩ) ±30% Isat (A) Typ. Irms (A) Typ. Marking PCSV80-R90T-RC PCSV80-1R0T-RC PCSV80-1R4T-RC PCSV80-1R5T-RC PCSV80-2R0M-RC PCSV80-2R2M-RC PCSV80-2R5M-RC PCSV80-3R3M-RC PCSV80-4R7M-RC PCSV80-5R6M-RC 0.9 1.0 1.4 1.5 2.0 2.2 2.5 3.3 4.7 5.6 30 30 30 30 20 20 20 20 20 20 100 100 100 100 100 100 100 100 100 100 7 7.5 9 9.5 11 11.5 13 15 18 23 13.8 13.0 10.8 10.0 9.60 9.20 8.20 7.50 6.00 5.70 8.05 7.95 7.80 7.70 7.40 7.20 6.30 6.00 5.50 5.20 R90 1R0 1R4 1R0 2R0 2R2 2R5 3R3 4R7 5R6 PCSV80-6R8M-RC PCSV80-100M-RC PCSV80-120M-RC PCSV80-150M-RC PCSV80-180M-RC PCSV80-220M-RC PCSV80-330M-RC PCSV80-470M-RC PCSV80-680M-RC PCSV80-101M-RC PCSV80-121M-RC PCSV80-151M-RC PCSV80-221M-RC PCSV80-270M-RC PCSV80-821M-RC 6.8 10 12 15 18 22 33 47 68 100 121 150 220 270 820 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 25 38 45 50 68 80 110 160 240 340 425 480 670 900 2800 5.40 4.30 3.80 3.60 3.10 2.80 2.30 1.90 1.70 1.40 1.10 1.00 .940 .830 .400 5.10 3.80 3.50 3.20 2.70 2.60 2.00 1.75 1.45 1.10 1.00 .900 .600 .550 .380 6R8 100 120 150 180 220 330 470 680 101 121 151 221 271 821 All specifications subject to change without notice. 949-356-1780 Features • Magnetically Shielded Construction • Low Profile Electrical Inductance Range: 0.9µh ~ 820µh (other values being added) Tolerance: Available in 20% & 30% Operating Temp: -55ºC ~ +125ºC Isat: Current at which the Inductance will drop by no more then 30% of its initial value. Irms: Based on a temp rise of ∆ T = 40ºC typical. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec Test Equipment (L): HP4284A (RDC): Chroma MilliOhm Meter Mode 16502 Current: HP4284A + HP42841A Physical Packaging: 1K per Tape and reel Marking: EIA Inductance Code ALLIED COMPONENTS INTERNATIONAL REVISED 1501/21/2015 www.alliedcomponents.com