RoHS SMD SHIELDED POWER CHIP INDUCTOR Dimensions: PCSV20 Inches (mm) .040 Max (1.02 Max) .063±.008 (1.6±0.2) .024 (0.6) X .079±.008 (2.0±0.2) .024 (0.6) Allied Part Number PCSV20-1R0M-RC PCSV20-1R5M-RC PCSV20-2R2M-RC PCSV20-3R3M-RC PCSV20-4R7M-RC PCSV20-5R6M-RC PCSV20-6R8M-RC PCSV20-100M-RC PCSV20-220M-RC Inductance Tolerance (µh) (%) Test Freq. MHz, 200mV 1.0 1.5 2.2 3.3 4.7 5.6 6.8 10 22 20 20 20 20 20 20 20 20 20 1 1 1 1 1 1 1 1 1 Features RDC (Ω) ±30% Isat (mA) Typ. Irms (mA) Typ. Marking 0.17 0.26 0.32 0.51 0.67 0.72 0.97 1.45 2.90 1400 1100 1000 820 680 650 560 470 310 1600 1400 1200 900 800 800 700 580 400 A B C D E F G H I All specifications subject to change without notice. • Magnetically Shielded Construction • Ultra Low Profile Electrical Inductance Range: 1.0µh ~ 22µh (other values being added) Tolerance: Available in 20% Operating Temp: -25ºC ~ +105ºC Isat: Current at which the Inductance will drop by no more then 30% of its initial value. Irms: Based on a temp rise of ∆ T = 40ºC typical at 25ºC Ambient. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec Test Equipment (L): HP4287A + HP16197A (RDC): Chroma MilliOhm Meter 16502 Current: HP4284A + HP42841A Physical Packaging: 2K per Tape and reel Marking: As noted 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 04/06/11 15 www.alliedcomponents.com