RoHS SMD SEMI SHIELDED POWER CHIP INDUCTOR Dimensions: .118±.008 (3.0±0.2) .059 MAX (1.5) PCFV35 Inches (mm) .13 (3.2) XXX .118±0.008 (3.0±0.02) .05 (1.1) .04 (1.0) .05 (1.1) .039 TYP (1.0) Allied Part Number PCFV35-R47M-RC PCFV35-1R0M-RC PCFV35-1R5M-RC PCFV35-2R2M-RC PCFV35-3R3M-RC PCFV35-4R7M-RC PCFV35-6R8M-RC PCFV35-100M-RC PCFV35-150M-RC PCFV35-220M-RC PCFV35-330M-RC Recommended Pattern Inductance Tolerance (µh) (%) Test Freq. MHz, 200mV .47 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 20 20 20 20 20 20 20 20 20 20 20 1 1 1 1 1 1 1 1 1 1 1 RDC (Ω) ±30% 0.036 0.054 0.063 0.090 0.125 0.170 0.235 0.360 0.550 0.770 0.770 Isat (mA) (Max) 4230 3060 2700 2070 1710 1420 1200 950 810 680 580 Irms (mA) (Max) 3600 2700 2340 1800 1620 1360 1170 900 720 580 540 Marking Features R47 1R0 1R5 2R2 3R3 4R7 6R8 100 150 220 330 All specifications subject to change without notice. • Semi Magnetically Shielded • High Current • Ultra Low Profile Electrical Inductance Range: .47µh ~ 33µh (other values being added) Tolerance: Available in 20% Operating Temp: -55ºC ~ +125ºC Isat: Current at which the Inductance will drop by no more then 30% of its initial value. Irms: Based on a temp rise of ∆ T = 40ºC typical above Ambient Temp. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec Test Equipment (L): HP4287A + HP16197A (RDC): Chroma MilliOhm Meter 16502 Current: HP4284A + HP42841A Physical ∆T(ºC) Packaging: 2K per Tape and reel Marking: As noted 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 15 04/22/14 www.alliedcomponents.com