RoHS SMD SEMI SHIELDED POWER CHIP INDUCTOR Dimensions: .079±0.1 (2.0±0.25) .048±.002 (1.2±0.05) PCFV25 Inches (mm) .087 (2.2) Magnetic Resin .099±0.1 (2.5±0.25) .034 (0.85) .036 (0.8) .034 (0.85) .04 (0.8) Recommended Pattern Inductance Tolerance (µh) (%) Allied Part Number Test Freq. MHz PCFV25-R50M-RC PCFV25-1R0M-RC PCFV25-1R2M-RC PCFV25-1R5M-RC PCFV25-2R2M-RC PCFV25-3R3M-RC PCFV25-4R7M-RC PCFV25-5R6M-RC PCFV25-6R8M-RC PCFV25-100M-RC PCFV25-150M-RC PCFV25-220M-RC .50 1.0 1.2 1.5 2.2 3.3 4.7 5.6 6.8 10 15 22 1 1 1 1 1 1 1 1 1 1 1 1 20 20 20 20 20 20 20 20 20 20 20 20 RDC (Ω) ±30% Isat (A) (Max) Irms (A) (Max) Marking 0.028 0.050 0.053 0.068 0.080 0.130 0.190 0.210 0.300 0.385 0.570 0.810 3150 2250 1890 1750 1620 1300 990 940 850 790 610 490 2700 2160 2110 2070 1620 1350 990 900 720 630 550 470 B C D E F G H I J K L M All specifications subject to change without notice. Features • • • • Magnetically Shielded Construction High Current Low DC Resistance Ultra Low Profile only 1.2mm Electrical Inductance Range: .50µh ~ 22µh (other values being added) Tolerance: Available in 20% Operating Temp: -55ºC ~ +125ºC Isat: Current at which the Inductance will drop by no more then 30% of its initial value. Irms: Based on a temp rise of ∆ T = 40ºC typical above Ambient Temp. Resistance to Soldering Heat Inductance vs. DC Current Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec 20 220 L(uH) 15 150 Test Equipment 10 100 (L): HP4287A + HP16197A (RDC): Chroma MilliOhm Meter 16502 Current: HP4284A + HP42841A 6R8 5 5R6 4R7 3R3 2R2 1R5 1R0 R50 0 0 0.5 1 1.5 2 2.5 3 3.5 4 DC Current(A) Physical Packaging: 2K per Tape and reel Marking: As noted Tem perature Change vs. DC Current 70 5R6 150 3R3 60 220 ∆T(ºC) 50 100 R50 1R5 4R7 6R8 1R0 2R2 40 30 20 10 0 0 0.5 1 1.5 2 2.5 3 3.5 4 DC Current(A) 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 15 04/18/2014 www.alliedcomponents.com