RoHS Power Chip Shielded Inductors Dimensions: Allied Part Number Inductance (µh) PCS6D28-3R0N-RC 3.0 30 PCS6D28-3R9N-RC 3.9 PCS6D28-4R7N-RC Inches (mm) RDC (Ω) Max. Rated Current (A) 10 .024 3.00 30 10 .027 2.60 4.7 30 10 .031 2.40 PCS6D28-5R0N-RC 5.0 30 10 .031 2.40 PCS6D28-6R0N-RC 6.0 30 10 .035 2.25 PCS6D28-6R8N-RC 6.8 30 10 .050 2.15 PCS6D28-7R3N-RC 7.3 30 10 .054 2.10 PCS6D28-8R6N-RC 8.6 30 10 .058 1.85 PCS6D28-100N-RC 10 30 10 .065 1.70 PCS6D28-120N-RC 12 30 10 .070 1.55 PCS6D28-150N-RC 15 30 10 .084 1.40 Resistance to Soldering Heat PCS6D28-180N-RC 18 30 10 .095 1.32 PCS6D28-220N-RC 22 30 10 .128 1.20 PCS6D28-270N-RC 27 30 10 .142 1.05 Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec. +/- 1 sec. PCS6D28-330N-RC 33 30 10 .165 0.97 PCS6D28-390N-RC 39 30 10 .210 0.86 PCS6D28-470N-RC 47 30 10 .238 0.80 PCS6D28-560N-RC 56 30 10 .277 0.73 PCS6D28-680N-RC 68 30 10 .304 0.65 PCS6D28-820N-RC 82 30 10 .390 0.60 PCS6D28-101N-RC 100 30 10 .535 0.54 220 30 1.30 0.30 PCS6D28-221N-RC Tolerance (%) PCS6D28 Test Freq. KHz, 1V 10 All specifications subject to change wtihout notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED15 7/22/11 Features • Shielded SMD Power Inductor • Low rofile • Low DC resistance • Ideal for DC-DC converter applications Electrical Inductance Range: 3µh to 220µh Tolerance: 30% over entire range Also, available in tighter tolerances Operating Temp: -30ºC ~ +100ºC Storage Temp: Under 25ºC Rated Current: Current at which inductance drop by 35% of intial value or ∆ T=40ºC lower, whichever is lower Test Equipment (L): HP4284A LF Impedance Analyzer (RDC): Chen Hwa 502 Rated Current: HP4284+HP42841A or Chen Hwa 1061 + Chen Hwa 301A Physical Packaging: 1500 pieces per 13 inch reel. Marking: EIA Inductance Code www.alliedcomponents.com