AC Line Filters SC Coils, SC-GJ Terminal Base Type Overview Applications The KEMET SC Coils, SC-GJ Terminal Base Type AC line filters are offered in a wide variety of sizes and specifications. • Consumer Electronics • Common mode choke Common mode Benefits – Terminal Base Type • • • • e Wide variety of sizes and specifications Inductances up to 3.0 mH Rated Currents up to 3 A DC Resistances as low as 35 mΩ ant] DC resistance Inductance (m/line) (mH) max. min. 80 2.0 Part3.0Number System100 35 0.6 SC40 1.0 Temperature rise(K) max. 40 40 40 02- 40 Rated Current (A) Withstanding voltage:Series AC 2400V (2 sec between lines) more than 100M(between • Thermal E (120˚C) SC- lines) 0x- class: = x A (e.g., 02- = 2 A) : –25 to T (T=120–temperature rise) n:100kHz, 1mA, KC547 Wire size (mmø) 0.5 0.5 0.6 0.6 30 Minimum Inductance (mH) x0 = x.0 mH (e.g., 30 = 3.0 mH) 0x = 0.x mH (e.g., 06 = 0.6 mH) Marking 220 230 306 310 Weight approx. (g) 9 10 8 GJ 9 Terminal Base Type GJ 17 max. (13) 5.0±2.0 (8.0) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com One world. One KEMET LF0007_SC-GJ • 6/16/2014 1 AC Line Filters – SC Coils, SC-GJ Terminal Base Type Dimensions – Millimeters 17.5 Maximum 17 Maximum (8.0) (13) 5.0 ±2.0 20 Maximum Marking (13) (8.0) Environmental Compliance All KEMET AC Line Filters are RoHS Compliant. Table 1 – Ratings & Part Number Reference Part Number Rated Current AC (A) Inductance (mH) Minimum DC Resistance/ Line (mΩ) Maximum SC-02-20GJ SC-02-30GJ SC-03-06GJ SC-03-10GJ 2 2 3 3 2.0 3.0 0.6 1.0 80 100 35 40 Temperature Wire Diameter Rise (K) (mm) Maximum 40 40 40 40 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com 0.5 0.5 0.6 0.6 Marking Weight (g) Approximate 220 230 306 310 9 10 8 9 LF0007_SC-GJ • 6/16/2014 2 (1 5.0± (13) (8.0) AC Line Filters – SC Coils, SC-GJ Terminal Base Type [mm] Specifications Item SC-GJ Rated Voltage 250 VAC/VDC Withstanding Voltage 2400 VAC (2 seconds, between lines) Insulation Resistance > 100 MΩ @ 500 VDC (between lines) Thermal Class E (120°C) Operating Temperature Range -25ºC to T (T = 120 - temperature rise) Inductance Measurement Condition 100 kHz, 1 mA, KC547 Frequency Characteristics equency characteristic e Filters 1M Impedance () 100K 10K 1K 100 10 1 6 3 1 6 3 02-30GJ 1 6 3 02-20GJ 1 6 3 03-06GJ 1 6 3 1 6 3 1 1K 03-10GJ 3 6 1 10K 3 6 1 100K 3 6 1 1M Frequency (Hz) 3 6 1 10M 3 30M Notes on Use Shelf Life • Use within 6 months. If the product is used after a storage period of 6 months or longer, confirm its solderability before use. Storage Condition • Avoid storage in high temperature and high humidity environment, as such condition may deteriorate the solderability of external electrode. • Avoid storage in atmosphere containing toxic gases or acid (e.g., sulphur and chlorine), as such gas may deteriorate the solderability of external electrode. • Avoid storage near strong magnetic field, as such condition may magnetize the product. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com LF0007_SC-GJ • 6/16/2014 3 AC Line Filters – SC Coils, SC-GJ Terminal Base Type KEMET Corporation World Headquarters Europe Asia Southern Europe Paris, France Tel: 33-1-4646-1006 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Sasso Marconi, Italy Tel: 39-051-939111 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg,Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Bishop’s Stortford, United Kingdom Tel: 44-1279-460122 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Espoo, Finland Tel: 358-9-5406-5000 Northeast Wilmington, MA Tel: 978-658-1663 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Central Novi, MI Tel: 248-306-9353 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com LF0007_SC-GJ • 6/16/2014 4 AC Line Filters – SC Coils, SC-GJ Terminal Base Type Disclaimer ThisproducthasbeenmadeavailablethroughaPrivateLabelAgreementandaDevelopmentandCross-LicensingAgreementbetweenKEMETandNECTOKINtoexpandmarket andproductofferingsforbothcompaniesandtheirrespectivecustomers.Formoreinformation,pleasevisithttp://www.kemet.com/nectokin. Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand verifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced. AllInformationgivenhereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied. StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly bycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.AnytechnicaladviceinferredfromthisInformationorotherwise providedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesnoobligationorliabilityfortheadvicegivenorresultsobtained. AlthoughKEMETdesignsandmanufacturesitsproductstothemoststringentqualityandsafetystandards,giventhecurrentstateoftheart,isolatedcomponentfailuresmaystill occur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards(suchasinstallationofprotective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Althoughallproduct–relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatothermeasuresmaynot berequired. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com LF0007_SC-GJ • 6/16/2014 5