100V, 214A, 3mOhm, 89nC – Die Size – 4.4 x 6.1 mm2 – FDB035N10A MOSFET Bare Die

FDB035N10A
N-Channel Power Trench Mosfet Chip
100V, 214A, 3.5mΩ1
Part
V(BR)DSS
FDB035N10A
IDn
100V
RDS(on)
214A
3.5mΩ
Die Size
1
4.4 x 6.1 mm
2
See page 2 for ordering part numbers & supply formats
Features
Applications
•
High density DC / DC Converters
•
High Power & Current Handling Capability
•
AC Motor Drives
•
Low RDS (on) per mm2
•
Low Gate Charge
Maximum Ratings
Symbol
Parameter
Ratings
Units
VDSS
Drain to Source Voltage
100
V
VGSS
Gate to Source Voltage
±20
V
ID
IDM
TJ, TSTG
Drain Current
Drain Current
2
3
Continuous (TC = 25°C)
214
Continuous (TC = 100°C)
151
Pulsed
856
Operation Junction & Storage Temperature
EAS
Single Pulsed Avalanche Energy
dv/dt
Peak Diode Recovery dv/dt
A
-55 to 175
4
4
°C
658
mJ
6.0
V/ns
Symbol
Parameter
Test Conditions
Min
Typ
Max
Units
BVDSS
Drain to Source Voltage
ID =250µA, VGS = 0V TC = 25°C
100
-
-
V
VGS(th)
Gate threshold Voltage
VGS = VDS, ID =250µA
2.0
-
4.0
V
IDSS
Zero Gate Voltage Drain Current
VDS = 80V, VGS = 0V
-
-
1
µA
IGSS
Gate to Body Leakage Current
VGS = ±20V, VDS = 0V
-
-
±100
nA
VGS = 10V, ID = 75A
-
3
3.5
mΩ
VGS = 0V, ISD = 75A
-
-
1.25
V
1
RDS(on)
Drain to Source On Resistance
VSD
Drain to Source Diode Forward Voltage
1.
2.
3.
Notes:
Defined by chip design, not subject to production test at wafer level
Performance will vary based on assembly technique and substrate choice
Repetitive Rating: Pulse width limited by maximum junction temperature
Further Information - Contact your Micross sales office or email your enquiry to [email protected]
©2014 Fairchild Semiconductor Corporation & Micross Components
Page1
Static Characteristics, TJ = 25°C unless otherwise noted
Dynamic Characteristics4, TJ = 25°C unless otherwise noted
Symbol
Parameter
Test Conditions
Min
Typ
Max
GFS
Forward Transconductance
VDS = 10V, ID = 75A
-
167
-
S
-
5485
7295
pF
-
2430
3230
pF
-
210
-
pF
-
89
116
nC
-
24
-
nC
-
8
-
nC
-
25
-
nC
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
Qg(tot)
Total Gate Charge at 10V
Qgs
Gate to Source Gate Charge
Qgs2
Gate Charge Threshold to Plateau
Qgd
Gate to Drain “Miller” Charge
VDS =25V, VGS = 0V
f = 1MHz
VDS =80V, ID = 75A
VGS = 10V
Units
Switching Characteristics4, TJ = 25°C unless otherwise noted
Symbol
Parameter
td(on)
Turn-On Delay Time
tr
Turn-On Rise Time
td(off)
Turn-Off Delay Time
tf
Turn-Off Fall Time
ESR
Equivalent Series Resistance(G-S)
Test Conditions
VDD = 50V, ID = 75A
5
VGS = 10V, RGEN = 4.7Ω
Drain shorted to Source; f=1Mhz
Min
Typ
Max
Units
100
-
-
V
2.0
-
4.0
V
-
-
1
µA
-
-
±100
nA
-
1.2
-
Ω
Drain-Source Diode Characteristics4, TJ = 25°C unless otherwise noted
Symbol
Parameter
Test Conditions
Min
Typ
Max
Units
IS
Maximum Continuous Drain to Source Diode Forward Current
-
-
214
A
ISM
Maximum Pulsed Drain to Source Diode Forward Current
-
-
856
A
-
1.25
V
VSD
Drain to Source Diode Forward
Voltage
VGS = 0V, ISD = 75A
-
trr
Reverse Recovery Time
72
-
ns
Reverse Recovery Charge
VGS = 0V, ISD = 75A, VDD = 80V
dIF/dt = 100A/μs
-
Qrr
-
129
-
nC
Ordering Guide
Part Number
Format
Detail / Drawing
FDB035N10AMW
Un-sawn wafer, electrical rejects inked
Page 3
FDB035N10AMF
Sawn wafer on film-frame
Page 4
FDB035N10AMD
Singulated die / chips in waffle pack
Page 4
4.
5.
Notes:
Characterised by design & tested at component level, not subject to production test at wafer level
Essentially Independent of Operating Temperature Typical Characteristics
Further Information - Contact your Micross sales office or email your enquiry to [email protected]
©2014 Fairchild Semiconductor Corporation & Micross Components
Page2
Note: Singulated Die / Chips can also be supplied in Pocket Tape or SurfTape® on request
Die Drawing
SOURCE
SOURCE
SOURCE
GATE
Mechanical Data
Parameter
Units
Chip Dimensions Un-sawn
4445 X 6096
µm
Chip Thickness (Nominal)
200
µm
Gate Pad Size
622 X 420
µm
Wafer Diameter
150 (subject to change)
mm
60 (subject to change)
µm
Saw Street
Wafer notch parallel with frame flat
Topside Metallisation & Thickness
Al
Backside Metallisation & Thickness
Ti-V/Ni-Ag
5
µm
0.65
µm
Topside Passivation
Unpassivated
Recommended Die Attach Material
Soft Solder or Conductive Epoxy
Recommended Wire Bond - Gate
Al 125µm X1
Recommended Wire Bond – Source
Al 380µm X2
Further Information - Contact your Micross sales office or email your enquiry to [email protected]
©2014 Fairchild Semiconductor Corporation & Micross Components
Page3
Wafer orientation on frame
Sawn Wafer on Film-Frame – Dimensions (inches)
Die in Waffle Pack – Dimensions (mm)
A
X
X = 4.55mm ±0.13mm pocket size
Y = 6.83mm ±0.13mm pocket size
Z = 0.81mm ±0.08mm pocket depth
A = 5° ±1/2° pocket draft angle
No Cross Slots
Array = 7 X 5 (35)
Y
Z
X
OVERALL TRAY SIZE
Size = 50.67mm ±0.25mm
Height = 3.94mm ±0.13mm
Flatness = 0.30mm
DISCLAIMER THE INFORMATION HEREIN IS GIVEN TO DESCRIBE CERTAIN COMPONENTS AND SHALL NOT BE CONSIDERED AS WARRANTED CHARACTERISTICS. NO
RESPONSIBILITY IS ASSUMED FOR ITS USE; NOR FOR ANY INFRINGEMENT OF PATENTS OR OTHER RIGHTS OF THIRD PARTIES WHICH MAY RESULT FROM ITS USE. NO LICENSE IS
GRANTED BY IMPLICATION OR OTHERWISE UNDER ANY PATENT OR PATENT RIGHTS OF EITHER MICROSS COMPONENTS OR FAIRCHILD SEMICONDUCTOR CORPORATION.
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR
DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY
ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND
CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS
WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used here in:
(a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use
provided in the labelling, can be reasonably expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
Further Information - Contact your Micross sales office or email your enquiry to [email protected]
©2014 Fairchild Semiconductor Corporation & Micross Components
Page4
1. Life support devices or systems are devices or systems which,
Similar pages
100V, 164A, 3.9mOhm, 160nC – Die Size – 6.4 x 5.3 mm2 – FDP047N10 MOSFET Bare Die
100V, 50A, 12.5mOhm, 16.2nC – Die Size – 3.2 x 1.9 mm2 – FDP150N10A MOSFET Bare Die
250V, 69A, 34mOhm, 77nC – Die Size - 9.0 x 7.1 mm2 – FDA69N25 MOSFET Bare Die
600V, 77A, 36mOhm, 285nC – Die Size - 10 x 7.7 mm2 – FCH041N60E MOSFET Bare Die
10.9 x 7.8 mm2 – FCA76N60N MOSFET Bare Die
4.7 x 4.27mm2 – FDP027N08 MOSFET Bare Die
250V, 62A, 29mOhm, 100nC – Die Size - 6.8 x 6.8 mm2 – FQA62N25C MOSFET Bare Die
FDB075N15A MOSFET Bare Die
HGTG20N60
600V, 30A, VCE(sat) 1.1V, VGE(th) min 4V, tr 46ns - tf 1.3 s, Eon 1.1mJ, Eoff 21mJ - Die Size - 6.6 x 6.4 mm 2 - FGA30N60LS IGBT DIE
650V, 75A, VCE(sat) 1.65V, VGE(th) min 4V, tr 43ns - tf 24ns, Eon 2.85mJ, Eoff 1.2mJ - Die Size - 5.4 x 5.3 mm 2 - FGH75T65UP IGBT DIE
1200V, 15A, VCE(sat) 1.9V, VGE(th) min 4.5V, tr 20ns - tf 100ns, Eon 3mJ, Eoff 0.6mJ - Die Size - 5.3 x 5.5 mm 2 - FGA15N120AN IGBT
1200V, 40A, VCE(sat) 2.6V, VGE(th) min 3.5V, 3.5V, tr 20ns - tf 40ns, Eon 2.3mJ, Eoff 1.1mJ - Die Size - 5 x 5 mm 2 - FGH40N120AN IGBT DIE
FGH60N60SM
650V, 40A, VCE(sat) 1.65V, VGE(th) min 4V, tr 26ns - tf 17ns, Eon 1.59mJ, Eoff 0.58mJ - Die Size - 3.9 x 3.9 mm 2 - FGH40T65UP IGBT DIE
600V, 150A, VCE(sat) 2.2V, VGE(th) min 5V, tr 70ns - tf 110ns, Eon 1.6mJ, Eoff 4.8mJ - Die Size - 11.1 x 11.1 mm 2 - PCSG150N60 IGBT DIE
600V, 50A, VCE(sat) 2.2V, VGE(th) min 5V, tr 30ns - tf 110ns, Eon 1.1mJ, Eoff 1.2mJ - Die Size - 6.7 x 6.5 mm 2 - PCSG50N60 IGBT DIE
1200V, 40A, VCE(sat) 1.8V, VGE(th) min 4.9V, tr 47ns - tf 10ns, Eon 2.7mJ, Eoff 1.1mJ - Die Size - 6.7 x 6.5 mm2 - FGH40T120SM IGBT DIE
ISL9R30120 STEALTH Rectifier
ISL9R860 Rectifier Bare
Die Size - 7.1 x 5.1 mm2 – RHRG75120 HYPERFAST Rectifier
RHRG30120 HYPERFAST Rectifier