650V, 20A, VF 2.1V, trr 42ns – Die Size - 1.9 x 4.1 mm2 – FFP20S65S Rectifier Bare Die

FFP20S65S
STEALTH™ Rectifier Diode Chip
650V, 20A, VF 2.1V, trr = 42ns
Part
VRRM
IF(AV)n
VF Typ
trr Typ
Die Size
FFP20S65S
650V
20A
2.1V
42ns
1.9 x 4.1 mm
2
See page 2 for ordering part numbers & supply formats
Features
Applications
•
General Purpose
•
Exceptionally Soft Recovery
•
Free Wheeling Diode
•
Low Reverse Recovery Current
•
175°C rated, optimised for low loss performance
Maximum Ratings
Symbol
Parameter
Ratings
Units
VRRM
Peak Repetitive Reverse Voltage
650
V
VRWM
Working Peak Reverse Voltage
650
V
VR
DC Blocking Voltage
650
V
1
IF(AV)
Average Rectified Forward Current @ TC = 100°C
20
A
IFSM
Non-repetitive Peak Surge Current 60Hz Single Half-Sine Wave
120
A
TJ, TSTG
Operation Junction & Storage Temperature
-55 to 175
°C
Electrical Characteristics, TJ = 25° unless otherwise noted
Parameter
Test Conditions
VF
Forward Voltage
2
IF = 20A
2
IR
Reverse Current
VR = 665V
3
Erec
Reverse Recovery Energy
trr
Reverse Recovery Time
3
3
Irr
Reverse Recovery Current
IF =20A, dI/dt =200A/µs
3
Qrr
Reverse Recovery Charge
1.
2.
3.
Min
Typ
Max
Units
TC = 25°C
-
2.1
2.6
V
TC = 175°C
-
1.7
-
TC = 25°C
-
-
10
TC = 175°C
-
96
-
uJ
TC = 25°C
-
42
-
ns
TC = 175°C
-
200
-
TC = 25°C
-
3.6
-
TC = 175°C
-
8.0
-
TC = 25°C
-
76
-
TC = 175°C
-
800
-
µA
A
nC
Notes:
Performance will vary based on assembly technique and substrate choice
Pulse: Test Pulse width = 300µs, Duty Cycle = 2%
Tested in discrete package, not subject to 100% production test at wafer level
Further Information - Contact your Micross sales office or email your enquiry to [email protected]
©2014 Fairchild Semiconductor Corporation & Micross Components
Page1
Symbol
Ordering Guide
Part Number
Format
Detail / Drawing
FFP20S65SMW
Un-sawn wafer, electrical rejects inked
Page 2
FFP20S65SMF
Sawn wafer on film-frame
Page 3
FFP20S65SMD
Singulated die / chips in waffle pack
Page 3
Note: Singulated Die / Chips can also be supplied in Pocket Tape or SurfTape® on request
Die Drawing - Dimensions in µm
1900
40
949.2
Passivated area
3109.2
4060
ANODE
Chip backside is CATHODE
Mechanical Data
Parameter
Units
Chip Dimensions Un-sawn
1900 x 4060
µm
Chip Thickness (Nominal)
250
µm
Anode Pad Size
949.2 x 3109
µm
Wafer Diameter
127mm (subject to change)
mm
Saw Street
80 (subject to change)
µm
Wafer orientation on frame
Wafer notch parallel with frame flat
Topside Metallisation & Thickness
Al
6
µm
Backside Metallisation & Thickness
V/Ni/Ag
0.3
µm
Silicon Nitride
Soft Solder or Conductive Epoxy
Recommended Wire Bond - Anode
Al 380µm X2
Page2
Topside Passivation
Recommended Die Attach Material
Further Information - Contact your Micross sales office or email your enquiry to [email protected]
©2014 Fairchild Semiconductor Corporation & Micross Components
Sawn Wafer on Film-Frame – Dimensions (inches)
Die in Waffle Pack – Dimensions (mm)
A
X
X = 4.45mm ±0.13mm pocket size
Y = 2.77mm ±0.13mm pocket size
Z = 0.91mm ±0.08mm pocket depth
A = 5° ±1/2° pocket draft angle
No Cross Slots
Array = 8 X 12 (96)
Y
Z
X
OVERALL TRAY SIZE
Size = 50.67mm ±0.25mm
Height = 3.94mm ±0.13mm
Flatness = 0.30mm
DISCLAIMER THE INFORMATION HEREIN IS GIVEN TO DESCRIBE CERTAIN COMPONENTS AND SHALL NOT BE CONSIDERED AS WARRANTED CHARACTERISTICS. NO
RESPONSIBILITY IS ASSUMED FOR ITS USE; NOR FOR ANY INFRINGEMENT OF PATENTS OR OTHER RIGHTS OF THIRD PARTIES WHICH MAY RESULT FROM ITS USE. NO LICENSE IS
GRANTED BY IMPLICATION OR OTHERWISE UNDER ANY PATENT OR PATENT RIGHTS OF EITHER MICROSS COMPONENTS OR FAIRCHILD SEMICONDUCTOR CORPORATION.
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR
DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY
ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND
CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS
WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used here in:
(a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use
provided in the labelling, can be reasonably expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
Further Information - Contact your Micross sales office or email your enquiry to [email protected]
©2014 Fairchild Semiconductor Corporation & Micross Components
Page3
1. Life support devices or systems are devices or systems which,
Similar pages
600V, 30A, VF 2.1V, trr 28ns – Die Size - 3.7 x 3.7 mm2 – FFP30S60S Rectifier Bare Die
600V, 50A, VF 1.38V, trr 75ns – Die Size - 4.06 x 4.06 mm2 – FFH50US60S Rectifier Bare Die
Die Size - 7.1 x 5.1 mm2 – RHRG75120 HYPERFAST Rectifier
RHRG30120 HYPERFAST Rectifier
ISL9R860 Rectifier Bare
ISL9R18120 STEALTH Rectifier
FDB075N15A MOSFET Bare Die
HGTG20N60
600V, 30A, VCE(sat) 1.1V, VGE(th) min 4V, tr 46ns - tf 1.3 s, Eon 1.1mJ, Eoff 21mJ - Die Size - 6.6 x 6.4 mm 2 - FGA30N60LS IGBT DIE
250V, 69A, 34mOhm, 77nC – Die Size - 9.0 x 7.1 mm2 – FDA69N25 MOSFET Bare Die
1200V, 40A, VCE(sat) 2.6V, VGE(th) min 3.5V, 3.5V, tr 20ns - tf 40ns, Eon 2.3mJ, Eoff 1.1mJ - Die Size - 5 x 5 mm 2 - FGH40N120AN IGBT DIE
1200V, 15A, VCE(sat) 1.9V, VGE(th) min 4.5V, tr 20ns - tf 100ns, Eon 3mJ, Eoff 0.6mJ - Die Size - 5.3 x 5.5 mm 2 - FGA15N120AN IGBT
FGH60N60SM
650V, 40A, VCE(sat) 1.65V, VGE(th) min 4V, tr 26ns - tf 17ns, Eon 1.59mJ, Eoff 0.58mJ - Die Size - 3.9 x 3.9 mm 2 - FGH40T65UP IGBT DIE
600V, 150A, VCE(sat) 2.2V, VGE(th) min 5V, tr 70ns - tf 110ns, Eon 1.6mJ, Eoff 4.8mJ - Die Size - 11.1 x 11.1 mm 2 - PCSG150N60 IGBT DIE
100V, 164A, 3.9mOhm, 160nC – Die Size – 6.4 x 5.3 mm2 – FDP047N10 MOSFET Bare Die
600V, 50A, VCE(sat) 2.2V, VGE(th) min 5V, tr 30ns - tf 110ns, Eon 1.1mJ, Eoff 1.2mJ - Die Size - 6.7 x 6.5 mm 2 - PCSG50N60 IGBT DIE
1200V, 40A, VCE(sat) 1.8V, VGE(th) min 4.9V, tr 47ns - tf 10ns, Eon 2.7mJ, Eoff 1.1mJ - Die Size - 6.7 x 6.5 mm2 - FGH40T120SM IGBT DIE
600V, 77A, 36mOhm, 285nC – Die Size - 10 x 7.7 mm2 – FCH041N60E MOSFET Bare Die
650V, 75A, VCE(sat) 1.65V, VGE(th) min 4V, tr 43ns - tf 24ns, Eon 2.85mJ, Eoff 1.2mJ - Die Size - 5.4 x 5.3 mm 2 - FGH75T65UP IGBT DIE
100V, 50A, 12.5mOhm, 16.2nC – Die Size – 3.2 x 1.9 mm2 – FDP150N10A MOSFET Bare Die
10.9 x 7.8 mm2 – FCA76N60N MOSFET Bare Die