Download Data Sheet

DTEA1024 SERIES
16~36 Watts
AC/DC Desktop Power Supplies
Rev B
IEC-320-C14
IEC-320-C8
IEC-320-C6
IEC-320-C18
Size: 3.94 x 1.77 x 1.22
inches
Size: 3.94 x 1.77 x 1.22 inches
Size: 3.94 x 1.77 x 1.22 inches
Size: 3.94 x 1.77 x 1.22
inches
FEATURES
• Single Outputs
• Short Circuit & Over Voltage Protection
• 100~240VAC Input Voltage Range
• RoHS & WEEE Compliance
• IEC-320-C14, IEC-320-C8, IEC-320-C6, &
• MTBF > 30,000 Hours
• UL/cUL 60950, TUV/SUD EN IEC 60950, CB,
FCC, CE Safety Approvals
• Optional Output Connectors Available
IEC-320-C18 AC Inlets Available
• Efficiency Meets CEC Level V, VI
• High Efficiency >89%
DESCRIPTION
The DTEA1024 series of AC/DC desktop power supplies provides up to 36 Watts of continuous output power in a 3.94” x 1.77” x 1.22” package. All
models have a single output and a wide input voltage range of 100~240VAC. This series is RoHS and WEEE compliant and meets CEC Level V, VI
requirements. This series also has UL/cUL 60950, TUV/SUD EN/IEC 60950, CB, FCC, and CE safety approvals. All models are protected against
short circuit and over voltage conditions. Four AC inlet connector types are available for this series: IEC-320-C14, IEC-320-C8, IEC-320-C6, and
IEC-320-C18. Optional output connectors are also available please call factory for ordering details.
MODEL SELECTION TABLE
Model Number (1)
DTEA1024Ax
DTEA1024Bx
DTEA1024Cx
DTEA1024Dx
DTEA1024Ex
DTEA1024Fx
DTEA1024Gx
DTEA1024Hx
DTEA1024Jx
DTEA1024Kx
DTEA1024Mx
DTEA1024Nx
DTEA1024Px
DTEA1024Qx
DTEA1024Rx
Input Voltage
Range
100 ~ 240 VAC
Output Voltage
(2)
5 ~ 8 VDC
5 ~ 8 VDC
5 ~ 8 VDC
9 ~ 11 VDC
9 ~ 11 VDC
9 ~ 11 VDC
12 ~ 17 VDC
12 ~ 17 VDC
18 ~ 24 VDC
18 ~ 24 VDC
36 ~ 48 VDC
36 ~ 48 VDC
12V
12V
24V
Output Current
Min
Max
0A
2.0A
0A
3.0A
0A
4.0A
0A
1.5A
0A
2.0A
0A
3.0A
0A
1.66A
0A
2.5A
0A
1.33A
0A
1.66A
0A
0.55A
0A
0.83A
0A
3.0A
0A
2.0A
0A
1.5A
Load
Regulation
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Line
Regulation(3)
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
Ripple & Noise
(4)
Output Power
100mVp-p
100mVp-p
100mVp-p
250mVp-p
250mVp-p
250mVp-p
250mVp-p
250mVp-p
350mVp-p
350mVp-p
480mVp-p
480mVp-p
250mVp-p
250mVp-p
350mVp-p
16W
20W
24W
18W
24W
27W
20W
30W
24W
30W
20W
30W
36W
24W
36W
NOTES
1. The “x” in the model number represents the type of AC inlet connector: “x” can be “1” for IEC-320-C14 type, “2” for IEC-320-C8 type, “3” for IEC320-C6, or “6” for IEC-320-C18 type.
2. The output voltage is specified as a range (Ex: 36~48 VDC); the customer must specify what they want the voltage set at.
3. Line Regulation is defined by changing ±10% of input voltage from nominal line at rated load.
4. Ripple and Noise is measured at nominal line and full load with 20MHz bandwidth and a 0.1µF ceramic capacitor and 47µF aluminum
capacitors in parallel across the output.
5. Optional output connectors are available. Please call factory for ordering details.
11/15/2013
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797
website: www.wallindustries.com • e-mail: [email protected]
Page 1 of 3
DTEA1024 SERIES
16~36 Watts
AC/DC Desktop Power Supplies
Rev B
SPECIFICATIONS: DTEA1024 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
Input Voltage
100
240
VAC
Input Frequency
50
60
Hz
1
A
60
A
Input Current
Inrush Current
Cold start
OUTPUT SPECIFICATIONS
Output Voltage
Line Regulation
See Table
Defined by changing ±10% of input voltage from
nominal line at rated load
Load Regulation
-1
+1
%
-5
+5
%
Output Power
See Table
Output Current
See Table
Minimum Load
Ripple & Noise (20MHz BW)
0
Measured at nominal line and full load with 0.1µF
ceramic and 47µF aluminum capacitors in parallel
Hold-up Time
A
See Table
8.3
Turn-on Time
ms
3
s
PROTECTION
Over Voltage Protection
Automatic recovery
Short Circuit Protection
Automatic recovery
GENERAL SPECIFICATIONS
Efficiency
Meets CEC Level V, VI
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
0
+40
°C
Storage Temperature
-20
+85
°C
Operating Humidity
10
90
%
Storage Humidity
5
95
%
Cooling
Free air convection
MTBF
30,000
hours
PHYSICAL SPECIFICATIONS
Weight
Dimensions (L x W x H)
AC Inlet Connector
Output Connectors
Suffix “1”
Suffix “2”
Suffix “3”
Suffix “6”
Call factory for ordering details
7.05oz (200g)
3.94 x 1.77 x 1.22 inches (100 x 45 x 31
mm)
IEC-320-C14
IEC-320-C8
IEC-320-C6
IEC-320-C18
Several options available
SAFETY & COMPLIANCE
Safety Approvals
Compliance
11/15/2013
UL/cUL 60950, TUV/SUD EN IEC 60950, CB, FCC, CE
RoHS, WEEE, CEC Level V, VI
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797
website: www.wallindustries.com • e-mail: [email protected]
Page 2 of 3
Rev B
DTEA1024 SERIES
16~36 Watts
AC/DC Desktop Power Supplies
MECHANICAL DRAWING
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
11/15/2013
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 3