Three Phase Filters F.LL.D3 series – HN.R2 type Industrial environments High performance, high voltage, general applications Offered as an extension to the standard AN/HN.*1 series, these products are rated at 600Vac, whilst still maintaining performance characteristics required for industrial frequency inverter and motor drive applications. • Current ratings from 8A to 450A • High voltage design - 600Vac • High attenuation performance • Safety terminal blocks for easy installation • 3 phase + neutral designs available Mechanical specifications Electrical specifications Manufacture: metal enclosure, electrical components sealed with self-extinguishing resin. Connections: Phases: terminal blocks – all current ratings. Earth: threaded with nuts plus washer: 8A to 50A = M6; 80A to 280A = M10; 450A = M16 Rated voltage (VR): 600Vac, 50/60Hz at 40°C Rated current (IR): referred to room temperature = 40°C Leakage current (IL): at 440V / √3, 50Hz, max value Voltage test (2S): line to ground 3470Vdc line to line 1700Vdc Climatic category: HPF (25/085/21); temperature range: -25°C to +85°C Line Line Load Circuit diagram B Load Circuit diagram A Filter range Code F.LL.D3.008A.HN.R2 F.LL.D3.016A.HN.R2 F.LL.D3.025A.HN.R2 F.LL.D3.036A.HN.R2 F.LL.D3.050A.HN.R2 F.LL.D3.080A.HN.R2 F.LL.D3.110A.HN.R2 F.LL.D3.180A.HN.R2 F.LL.D3.280A.HN.R2 F.LL.D3.450A.HN.R2* IR (A) 8 16 25 36 50 80 110 180 280 450 IL (mA) 24 24 275 275 275 315 315 335 470 470 Cx (µF) 3x2.2 + 3x1.0 3x4.4 + 3x2.2 3x4.4 + 3x4.4 3x4.4 + 3x4.4 3x4.4 + 3x4.4 3x6.7 + 3x6.7 3x6.7 + 3x6.7 3x5 + 3x5 3x10 + 3x10 3x10 + 3x10 Cy (nF) 3x10 + 3x47 3x10 + 3x47 3x10 + 2x1µ F + 3x94 3x10 + 2x1µ F + 3x94 3x10 + 2x1µ F + 3x94 3x94 + 2x1µ F + 3x94 3x94 + 2x1µ F + 3x94 3x94 + 2x1µ F + 3x94 3x282 + 2x1µ F + 3x282 3x282 + 2x1µ F + 3x282 L (mH) 3x7.6 3x5.2 3x2.2 3x1.3 3x0.8 3x0.9 3x0.5 3x0.5 3x0.31 3x0.075 R (MΩ) 3x1 3x1 6 x 1.5 + 2 x 0.68 6 x 1.5 + 2 x 0.68 6 x 1.5 + 2 x 0.68 6 x 1.5 + 2 x 0.68 6 x 1.5 + 2 x 0.68 6 x 1.5 + 2 x 0.68 6 x 1.5 + 2 x 0.68 6 x 1.5 + 2 x 0.68 LR (mΩ) < 38 < 10 < 4.3 < 2.4 < 1.5 < 1.2 < 0.7 < 0.5 < 0.3 < 0.25 Circ diag A A B B B B B B B B = See leakage current note on page two Approvals Except model marked* 11 Three Phase Filters F.LL.D3 series – HN.R2 type Industrial environments Dimensions (mm) and connections Case R ...F.LL.D3...008A... Case S ...F.LL.D3...016A... Case T ...F.LL.D3...025 – 110A... Case U ...F.LL.D3...180 – 450A... Dimensions Code F.LL.D3.008A.HN.R2 F.LL.D3.016A.HN.R2 F.LL.D3.025A.HN.R2 F.LL.D3.036A.HN.R2 F.LL.D3.050A.HN.R2 F.LL.D3.080A.HN.R2 F.LL.D3.110A.HN.R2 F.LL.D3.180A.HN.R2 F.LL.D3.280A.HN.R2 F.LL.D3.450A.HN.R2 12 A 200 350 350 350 350 350 350 300 450 450 B 150 170 170 170 170 170 170 180 260 260 C 65 90 90 90 90 90 90 128 153 153 D 120 - E 115 375 375 375 375 375 375 470 660 660 F 135 130 130 130 130 130 130 156 220 220 G 31 35 35 35 35 36 50 64 64 H 10 10 30 30 30 30 32 25 31 31 J 230 380 400 400 400 427 436 537 702 702 K 17 70 70 70 70 70 88 103 103 L 60 38 47 47 M 400 400 400 400 400 400 510 700 700 Case R S T T T T T U U U Terminal Size 4mm2 4mm2 10mm2 10mm2 10mm2 25mm2 50mm2 95mm2 150mm2 240mm2 Three Phase Filters F.LL.D3 series – HN.R2 type Industrial environments Insertion loss (Typical) – – – Symmetrical (line to line) –––– Asymmetrical (line to ground) ...F.LL.D3.008A... ...F.LL.D3.016A... ...F.LL.D3.025A... ...F.LL.D3.036A... ...F.LL.D3.050A... ...F.LL.D3.080A... ...F.LL.D3.110A... ...F.LL.D3.180A... Note: 280A and 450A performance data available on request 13