EMI Filtered Connectors Catalog

EMI Filtered Connectors
from performance to board
space, to cost, we offer many
reasons and options for
managing EMI @ the signal
& power I/O
Series F Ferrite Filtered Connectors
offer a low cost, space saving solution for
high frequency interference… FC3-FC7
Series 500 Low-Profile Feed-Through
Connectors deliver reliable EMI
filtering in 90° PCB and straight
PCB connectors… FC8-FC11
Series 600 Hi-Density Filtered
Connectors meet the growing
need for increased circuit
densities in smaller
packages… FC12-FC13
Series 700 High Performance
Connectors feature feedthrough capacitive and Pi filters
for the most effective filtering…
FC16-FC37
Filtered Combo D-Sub
Connectors use tubular capacitors
for high insertion loss in signal,
power and coaxial contacts…
FC38-FC48
Micro D Series Connectors
allow designers to incorporate
EMI filtering into even smaller
packages… FC49-FC53
Datacom Connectors including
modular jack, miniature ribbon and
mini-DIN protect critical datacom
lines… FC54-FC58
USB Connectors incorporate EMI
filtering and ESD protection into
standard USB packages freeing up
valuable board space… FC59
Hooded Strain Reliefs for shock
protection from exposed wires and
short circuits… FC60
Performance Specifications &
Board/Panel Cutouts… FC62-FC64
Advantages of a Filtered Connector
■
■
■
Low ground impedance – Full ground
plate and metallic shell provide minimal
impedance and superior performance
compared to on-board filter with
high impedance
Eliminate re-radiation – Filtered
connector at interface leaves no path
for bypassing the filter
Ground plane shielding – API’s filtered
connector ground planes shield the box
even at the connector port
■
■
■
■
Efficient space utilization – Filters
located in the connectors provide additional
space on PCB board
Consistent performance – Filtered
connectors provide more consistent
pin to pin performance
Fewer components – Filtered
connectors reduce component count
creating cost savings
Reliability – API tests 100% of filters,
on-board filters are usually spot tested
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC1
Advantages of API
Filtered Connectors
API Technologies’ Spectrum Control brand offers the
industry’s most complete line of filtered D-subminiature
connectors. Our connectors are available in shell sizes
from 9 to 50, and come in many termination types, such as
PC mount, wire wrap, solder cup and 90° PCB. In addition,
API offers a wide range of filtering options, allowing you to
find the right balance between performance and economy.
D-Subminiature Connectors
EMI filter options include our Pi filter configuration,
which provides 45-60 dB per decade slope to insertion loss
curve, our capacitive-only C filters that provide cost-effective
EMI attenuation, ferrite filtered series F connectors (designed
for filtering in situations that do not tolerate capacitive loading
of circuit), as well as our series 500 connectors, with small
.318" footprints.
The construction of our high performance Series 600
and 700 connectors features a one-piece zinc diecast shell,
which is subsequently nickel-plated. Each filter is constructed
with 360° grounding with ground plate, and our patented
coaxial springs ensure ground continuity. And with API’s
advanced in-house ceramic tube design, you’ll get a
reliable, high performance filter from start to finish.
Low ground impedance – Full ground plate and
metallic shell provide minimal impedance and superior
performance compared to on-board filter with high
impedance
Eliminate re-radiation – Filtered connector at
interface leaves no path for bypassing the filter
Ground plane shielding – API filtered connector ground
planes shield the box even at the connector port
Efficient space utilization – Filters located in
connector provides additional space on PCB board
Consistent performance – Filtered connectors
provide more consistent pin to pin performance
Fewer components – Filtered connectors reduce
component count creating cost savings
Reliability – API tests 100% of filters, on-board filters
are usually spot tested
Advantages of an API Filtered Connector
■
■
■
■
■
■
■
On-Board Filters
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC2
Series F Ferrite Filtered
Connectors
The Series F filtered D-subminiature connectors
incorporate a solid slab of ferrite material as the filtering
element. This rugged one-piece design provides a
com-pact connector that is a drop-in replacement for
standard connectors. The ferrite material has been
chosen for optimum filtering performance in the 10
to 300 MHz range.
Series F Applications
■
■
Personal computers, microcomputer-applied products
and peripheral/terminal equipment
Eliminates common-mode noise along data lines in
data communication terminals and digital equipment
Features
■
■
■
■
■
■
■
■
■
■
■
■
Low cost, high performance ferrite filter
No distortion of wave forms
Replaces individual ferrite bead filters, saving cost
and space
Provides both pin to ground and pin to pin filtering
Effective in helping meet requirements of FCC, VDE,
EN55022 and Japan’s VCCI
Short, space saving .318" footprint
Interchangeable with standard
D-subminiature connectors
Can be installed directly over PCB trace pattern
with no shorting
4–40 UNC locking insert eliminates loose hardware
Metal shielding front shell
Gold plated contacts
RoHS compliant versions available
(replace 56- with 56F)
Impedance (ohms)
100
50
Right
Angle
25
10
Vertical
Angle
5
1
5
10
Frequency (MHz)
25
50
100
Mechanical Specifications
Front Shell. . . . . . . . Steel (Tin plated)
Housing . . . . . . . . . UL 94V-0 Rated thermoplastic, black
Contacts . . . . . . . . . Phosphor bronze (sockets)
. . . . . . . . . . . . . . . . or brass (pins)
Contact
Plating . . . . . . . . . . Gold Flash (<10µ in.) over nickel
Operating
Temperature. . . . . . . –40°C to +105°C
Electrical Specifications
Frequency
(MHz)
1
10
30
50
100
Impedance
(Ohms)
Right Angle
2
15
20
23
27
Vertical
1
6
10
12
15
Frequency
Range . . . . . . . . . . . 10 – 300 MHz
Current
Rating . . . . . . . . . . . 5 Amps
Dielectric
Withstand Voltage . . 1000 VAC for one minute
Insulation
Resistance . . . . . . . . 1000 megohms Min. @ 500VDC
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC3
Series F Ferrite Filtered
Connectors
Pin Contact – Right Angle Mount
Part
Number
Typ. Impedance
(Ohms)
Frequency
Description 30 MHz 100 MHz
Range
€ 56-402-001
D-Sub
9 pin
€ 56-412-001
D-Sub
15 pin
€ 56-422-001
D-Sub
25 pin
€
10
MHz
20
27
to
300
MHz
A+/0.010
(0.25)
B +/0.005
(0.13)
C +/0.015
(0.38)
D +/0.010
(0.25)
E +/0.015
(0.38)
F +/0.005
(0.13)
G +/0.004
(0.10)
H +/0.005
(0.13)
I +/0.005
(0.13)
J +/0.005
(0.13)
0.666
(16.92)
0.984
(25.00)
1.213
(30.81)
0.318
(8.08)
0.751
(19.10)
0.324
(8.22)
0.108
(2.74)
0.984
(25.00)
0.432
(10.98)
0.606
(15.40)
0.994
(25.25)
1.312
(33.32)
1.541
(39.14)
0.318
(8.08)
0.751
(19.10)
0.648
(16.46)
0.108
(2.74)
1.312
(33.32)
0.756
(19.20)
0.929
(23.60)
1.534
(38.96)
1.852
(47.04)
2.088
(53.04)
0.318
(8.08)
0.751
(19.10)
1.196
(30.36)
0.110
(2.76)
1.852
(47.04)
1.304
(31.12)
1.476
(37.50)
Also available through API’s authorized European distributors/agents.
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC4
*High-Density
Series F Ferrite Filtered
Connectors
.350
(8.89)
SCI Part Number
and Date Code
.100
(2.54)
Typ.
.494 ± .010
(12.55 ± 0.25)
.138 ± .010
(3.50 ± 0.25)
Socket Contact – Right Angle Mount
.984
(24.99)
.045
(1.14)
Typ.
.125 ± .003 Dia.
(3.18 ± 0.08)
.004 (0.10)
2 Holes
.277
(7.04)
Posn. No. Ref.
Typ.
.100
(2.54)
15
6
5
1 2
.090
(2.29)
Typ.
.047 ± .002 Dia.
(1.19 ± 0.05)
.006 (0.15)
15 Holes
.100
(2.54)
PC Board Mounting Dimensions
Part
Number
€ 56-404-001
€ 56-414-001
€ 56-424-001
€ 56-414-001-HD
€
Description
Typ. Impedance
(Ohms)
Frequency
30 MHz 100 MHz
Range
D-Sub
9 socket
D-Sub
15 socket
D-Sub
25 socket
Hi-Density
15 socket
20
27
10
MHz
to
300
MHz
16
26
A+/0.010
(0.25)
B +/0.005
(0.13)
C +/0.015
(0.38)
D +/0.010
(0.25)
E +/0.015
(0.38)
F +/0.005
(0.13)
G +/0.004
(0.10)
H +/0.005
(0.13)
I +/0.005
(0.13)
J +/0.005
(0.13)
0.643
(16.33)
0.984
(25.00)
1.213
(30.81)
0.318
(8.08)
0.755
(19.20)
0.324
(8.22)
0.108
(2.74)
0.984
(25.00)
0.432
(10.98)
0.606
(15.40)
0.971
(24.66)
1.312
(33.32)
1.541
(39.14)
0.318
(8.08)
0.755
(19.20)
0.648
(16.46)
0.108
(2.74)
1.312
(33.32)
0.756
(19.20)
0.929
(23.60)
1.511
(38.38)
1.852
(47.04)
2.088
(53.04)
0.318
(8.08)
0.755
(19.20)
1.196
(30.36)
0.110
(2.76)
1.852
(47.04)
1.304
(31.12)
1.476
(37.50)
0.643
(16.33)
0.984
(25.00)
1.213
(30.81)
Also available through API’s authorized European distributors/agents.
* See inset drawing
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC5
Series F Ferrite Filtered
Connectors
Pin Contact – Vertical Mount
Part
Number
Typ. Impedance
(Ohms)
Frequency
Description 30 MHz 100 MHz
Range
56-407-001
D-Sub
9 pin
56-417-001
D-Sub
15 pin
56-427-001
D-Sub
25 pin
10
MHz
10
15
to
300
MHz
A+/0.010
(0.25)
B +/0.005
(0.13)
C +/0.015
(0.38)
D +/0.010
(0.25)
E +/0.015
(0.38)
F +/0.005
(0.13)
G +/0.004
(0.10)
H +/0.005
(0.13)
I +/0.005
(0.13)
0.666
(16.92)
0.984
(25.00)
1.213
(30.81)
0.236
(5.99)
0.468
(11.88)
0.324
(8.22)
0.108
(2.74)
0.984
(25.00)
0.432
(10.98)
.994
(25.25)
1.312
(33.32)
1.541
(39.14)
0.236
(5.99)
0.468
(11.88)
0.648
(16.46)
0.108
(2.74)
1.312
(33.32)
0.756
(19.20)
1.534
(38.96)
1.852
(47.04)
2.088
(53.04)
0.236
(5.99)
0.468
(11.88)
1.196
(30.36)
0.110
(2.76)
1.852
(47.04)
1.304
(31.12)
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC6
Series F Ferrite Filtered
Connectors
Socket Contact – Vertical Mount
Part
Number
Typ. Impedance
(Ohms)
Frequency
Description 30 MHz 100 MHz
Range
56-403-001
D-Sub
9 socket
56-413-001
D-Sub
15 socket
56-423-001
D-Sub
25 socket
10
MHz
10
15
to
300
MHz
A+/0.010
(0.25)
B +/0.005
(0.13)
C +/0.015
(0.38)
D +/0.010
(0.25)
E +/0.015
(0.38)
F +/0.005
(0.13)
G +/0.004
(0.10)
H +/0.005
(0.13)
I +/0.005
(0.13)
0.643
(16.33)
0.984
(25.00)
1.213
(30.81)
0.236
(5.99)
0.472
(11.98)
0.324
(8.22)
0.108
(2.74)
0.984
(25.00)
0.432
(10.98)
.971
(24.66)
1.312
(33.32)
1.541
(39.14)
0.236
(5.99)
0.472
(11.98)
0.648
(16.46)
0.108
(2.74)
1.312
(33.32)
0.756
(19.20)
1.511
(38.38)
1.852
(47.04)
2.088
(53.04)
0.236
(5.99)
0.472
(11.98)
1.196
(30.36)
0.110
(2.76)
1.852
(47.04)
1.304
(31.12)
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC7
Series 500 Low Profile
Filtered Connectors
API’s Spectrum Control brand of Series 500 are cost
effective, highly reliable EMI filtered D-subminiature
connectors that feature a .318" footprint for 90 degree
PCB connectors and a low profile housing on straight
PCB connectors. Series 500 filtered D-subs are “drop-in”
replacements for standard unfiltered D-sub connectors.
The ability of these connectors to achieve EMI filtering
within the smaller footprint is the result of technical
advances in ceramic capacitors. Series 500 connectors
use tubular capacitors for high performance EMI filtering.
Quality features for these connectors include board lock
mounting, metal front shells and gold plated contacts.
Series 500 capacitive filtered D-sub connectors are
an ideal solution to FCC/EC/VCCI emissions problems.
These connectors are designed to protect equipment
from external EMI noise and eliminate system glitches.
Series 500 Applications
Features
■
“Drop-in” replacements for unfiltered D-subminiatures
■
Compact design, featuring .318" footprint
■
Tubular feed-through capacitors provide filtering
superior to on-board components
■
Ground plane design provides EMI shielding
■
Full interchangeability; based on MIL-C-24308
■
Each connector position is tested 100% for critical
electrical parameters to ensure consistent performance
■
Insulators are UL recognized UL94-V0
flammability rated
■
9, 15 and 25 shell sizes
■
Available with board lock feature
and 4-40 mounting threads
■
Personal computers
■
Industrial process equipment
■
Graphics workstations
■
PBX telecommunications equipment
■
Selective filtering available
■
Cellular base stations and medical electronics
■
UL/CSA approved
■
Greater than 40 dB filtering up through
1 GHz without resonances
■
Bi-directional control of EMI at the I/O ports
Rear
insulator
Front
insulator
Pin
terminal
Right angle
termination
4-40
threaded
insert
Ground
plane
Tubular
capacitor
Metal
front
shell
Board
lock
Lead
spacer
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC8
Series 500 Low Profile
Filtered Connectors
Mechanical Specifications
Shell . . . . . . . . . . . . Steel, tin plated
Insulators . . . . . . . . Glass-filled polyester,
. . . . . . . . . . . . . . . . flammability UL94V-O
Operating
Temperature. . . . . . . -40°C to +125°C
Capacitors . . . . . . . . Proprietary barium titanate
. . . . . . . . . . . . . . . . ceramic formulations
Other environmental tests such as shock, vibration,
humidity, etc. are performed as detailed in our filtered
connector performance specifications on page FC81.
Electrical Specifications
40
F
0p
30
150
Ground
Plane. . . . . . . . . . . . Phosphor bronze, nickel plated
50
20
1000 pF
10
0
1MHz
10MHz
pF
. . . . . . . . . . . . . *Heavier gold plating available upon request.
Typical Insertion Loss
F
120
Socket
Contacts . . . . . . . . . Copper alloy CA725,
. . . . . . . . . . . . . . . . 30 microinch (0.76 µm) gold plated*
. . . . . . . . . . . . . . . . over nickel
60
Insertion Loss (dB)
Pin Contacts . . . . . . Copper alloy CA725,
. . . . . . . . . . . . . . . . 15 microinch (0.38 µm) gold plated*
. . . . . . . . . . . . . . . . over nickel
0p
44
100MHz
Frequency
840 pF is typically within 2 dB of 1000 pF curve.
RF Current
Rating . . . . . . . . . . . 0.3 Amps
Filter Performance
Capacitance . . . . . . . 120, 440, 840, 1000,
. . . . . . . . . . . . . . . . 1500 pF ±30%
5GHz
Above curves represent application of proper grounding
fundamentals. For assistance consult API.
Current
Rating . . . . . . . . . . . 5 Amps
Contact
Resistance . . . . . . . . 10 milliohms maximum
1GHz
Cap.
(pF)
Value
±30%
3 dB
Insertion Loss (dB)
Cut-off
Freq.
20
100 500
1
2
(MHz) MHz MHz MHz GHz GHz
5 GHz
Working
Voltage . . . . . . . . . . 100 VDC
120
40
–
4
21
26
26
20
Dielectric
Withstanding
Voltage . . . . . . . . . . 300 VDC
440
11
3
15
27
33
32
25
840
6
6
19
32
38
37
25
1000
3
8
21
35
41
38
25
1500
2
10
25
40
47
42
25
Insulation
Resistance . . . . . . . . 1 Gohm minimum
UL Recognized. . . . . Under category of communication
. . . . . . . . . . . . . . . . circuit accessories,
. . . . . . . . . . . . . . . . File #E149046
Insertion loss measured per MIL-STD-220, no load, 50 ohm source and load.
Above data represents guaranteed minimum.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC9
Series 500 Low Profile
Filtered Connectors
Straight PC Mount
Straight PC Mount
Pin Contact (plug)
Socket Contact (receptacle)
E
1
E
A
C
.329
(8.36)
.050
(1.27)
A
C
.025
(.64)
sq.
.312
(7.92)
1
.230
(5.84)
.375
(9.53)
.243
(6.17)
.120±.005 (3.05±.13)
dia. holes or optional
#4–40 UNC
.150
(3.81)
.243
(6.17)
B
.243
(6.17)
.120±.005 (3.05±.13)
dia. holes or optional
#4–40 UNC
E
D
A
C
.483
(12.27)
.329
(8.36)
A
C
.050 .375
(1.27) (9.53)
.312
(7.92)
1
.230
(5.84)
B
.105
(2.67)
.120±.005 (3.05±.13)
dia. holes or optional
#4–40 UNC
9
15
25
B
.050 .375
(1.27) (9.53)
.494
(12.55)
.494
(12.55)
A
.150
(3.81)
E
D
.483
(12.27)
Size
.375
(9.53)
90° PC Mount
90° PC Mount
1
.025
(.64)
sq.
.494
(12.55)
.494
(12.55)
B
.050
(1.27)
.025
(.64)
sq.
.243
(6.17)
C
D
.430
(10.92)
.318
(8.08)
E
1.213
(30.81)
0.984 0.666
(24.99) (16.92)
0.540 0.748
(13.72) (19.00)
1.541
(39.14)
1.312 0.994
(33.32) (25.25)
0.867 1.076
(22.02) (27.33)
2.088
(53.04)
1.852 1.534
(47.04) (38.96)
1.412 1.616
(35.86) (41.05)
Standard Tolerance = ±.015 (0.38)
.243
(6.17)
B
.105
(2.67)
.120±.005 (3.05±.13)
dia. holes or optional
#4–40 UNC
Size
9
15
25
A
.025
(.64)
sq.
.243
(6.17)
.430
(10.92)
B
C
D
.318
(8.08)
E
1.213
(30.81)
0.984 0.642
(24.99) (16.31)
0.540 0.748
(13.72) (19.00)
1.541
(39.14)
1.312 0.970
(33.32) (24.64)
0.867 1.076
(22.02) (27.33)
2.088
(53.04)
1.852 1.510
(47.04) (38.35)
1.412 1.616
(35.86) (41.05)
Standard Tolerance = ±.015 (0.38)
Dimensions in inches (mm)
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC10
Series 500 Low Profile
Filtered Connectors
Ordering Information
Example: 56-524-013-GBL
56 -
5 2 4
-
Series 500
Connectors
Filtered
D-sub
Connectors
Shell Size/
Number of
Contacts
013
-
This part number represents a Series 500 filtered D-sub connector with 25 contacts,
socket to 90° PCB mount configuration. The filter has a capacitance value of 1000 pF
and the connector includes a grounded board lock.
GBL
For special needs or combinations of features, contact API engineering.
Contact Type/Termination
2 - Pin to 90° PCB mount
3 - Socket to straight PCB mount
0 - 9 size
4 - Socket to 90° PCB mount
1 - 15 size
7 - Pin to straight PCB mount
2 - 25 size
– - Standard connector
F - RoHS compliant version
Mounting or Hardware Options
TI - 4-40 threads on mounting
flange (.120" (3.05mm) hole
if not selected)
Capacitance
Value
010 - 120 pF
GBL - Grounded board lock,
includes 4-40 threads
(available only on 90° PCB)
011 - 440 pF
012 - 840 pF
013 - 1000 pF
GBLF - Grounded board lock and ferrite
slab, provides the enhanced
performance of an (LC) filter
(available only on 90° PCB)
014 - 1500 pF
GBL Option
Features
■ Snap-in retention to PC board,
requires no hardware
#4–40 UNC-2B
2 holes
Fits .125 (3.18)
diameter hole
.105
(2.67)
.025
(.64)
sq.
.318
(8.08)
■
Ensures low ground impedance
for superior filtering
■
4-40 threads on mounting flange
eliminate loose hardware
.374
(9.50)
Dimensions in inches (mm)
Board Layout
Typical Layout for .318" (8.08) Footprint
B
.109 (2.77)
.375
(9.53)
.054
(1.37)
D
C
A
Board edge
.040 (1.02)
.112
(2.84)
.056
(1.42)
.125
(3.18)
Shell
Size
A
B
C
D
9
.984
(24.99)
.436 = 4 x .109
(11.07 = 4 x 2.77)
.327 = 3 x .109
(8.31 = 3 x 2.77)
.492
(12.50)
15
1.312
(33.32)
.763 = 7 x .109
(19.38 = 7 x 2.77)
.654 = 6 x .109
(16.61 = 6 x 2.77)
.656
(16.66)
25
1.852
(47.04)
1.308 = 12 x .109
(33.22 = 12 x 2.77)
1.199 = 11 x .109
(30.45 = 11 x 2.77)
.926
(23.52)
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC11
Typical Insertion Loss
80
Series 600 High-Density
Filtered Connectors
70
Capacitive Filter
Insertion Loss (dB)
60
50
The miniaturization of electronic systems and sub-systems
is pushing designers to increase circuit densities within
smaller packages. To address this growing need, API
Technologies’ Spectrum Control brand has developed a
line of filtered High-Density D-subminiature connectors.
This new line of connectors incorporates the high
performance and reliable filtering of API’s standard
D-subs in the High-Density format.
30
18
20
10
0
16
15
10MHz
1MHz
100MHz
Frequency
1GHz 5GHz
Above curves represent application of proper
grounding fundamentals, for assistance consult
with Spectrum Control.
Features
Connectors designed to MIL-C-24308
■ Capacitance values from 85 pF to 4000 pF
■ Filter type feed-through C
■ Selectively specify and filter each contact position
■ Available in feed-through capacitive configurations
Mechanical Specifications:
Same as Series 700 connectors, page FC21.
19
40
■
Insertion loss measured per MIL-STD-220, no load, 50 ohm source and load.
Electrical Specifications
Current Rating . . . . 3 Amps
RF Current Rating. . 0.3 Amps
Contact Resistance . . 15 milliohms maximum
UL Recognized. . . . . Under category of communication
. . . . . . . . . . . . . . . . circuit accessories, File #E149046
Electrical Specifications: High-Density Connectors
Filter
Designations
Capacitance
Filter
Circuits
Value
Tol.
3 dB
Cut-off
Frequency
Max.
(MHz)
Dielectric
Working
WithVoltage DC
5
standing
-55°C to
MHz
Voltage
+125°C
10
MHz
Minimum Insertion Loss - Decibels (dB)
20
MHz
50
MHz
100
MHz
200
MHz
500
MHz
1
GHz
2
GHz
5
GHz
15
85 pF
±25%
60
300V
100V
—
—
—
—
1
6
16
21
22
20
16
180 pF
±25%
28
300V
100V
—
—
—
1
8
10
18
25
26
24
18
1000 pF
±25%
5.1
300V
100V
—
3
8
14
20
25
32
35
41
39
19
4000 pF
±25%
1.3
300V
100V
8
13
19
26
31
37
45
48
52
47
C
Filter designation “G” for grounded contacts, “I” for insulated (not filtered) contacts.
Filter designation “O” for omitted contact and no hole in ground plane.
Ordering Information
Example: 56-605-015-LI
56 -
D-Sub
Connector
6 0 5 - 0 15
Shell
Size**
0 = 15
1 = 26
2 = 44
3 = 62
4 = 78
- Standard connector
F - RoHS compliant version
Hi-Density
-
LI
Above data represents guaranteed minimum.
This part number represents a Series 600 Hi-Density filtered D-Sub
connector with 15 contacts, pin-socket adapter configuration. The FT
filters have a capacitance value of 85 pF and the connector includes
4-40 locking inserts.
Contact/Termination
Special
Filter Designation
1 - Pin to solder cup
0 = All
15 - 85 pF FT
2 - Pin to 90° PCB mount*
positions
16 - 180 pF FT
3 - Socket to PCB mount
same
18 - 1,000 pF FT
4 - Socket to 90° PCB*
9 = Special
19 - 4,000 pF FT
mount
loading
20 - Insulated contact
5 - Pin-socket adapter
** Some shell sizes require minimum order quantity.
7 - Pin to PCB mount
Consult API for details.
Options
LI = 4-40 inserts
S = Solder dip tails
50G = µ gold
GBL = Grounding board lock
* Required on right angle parts
Note: VGA adapters also available. Consult factory
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC12
Series 600 High-Density
Filtered Connectors
Pin/Socket Adapter
Size
A
B
C
D
E
F
G
15
1.213
(30.81)
.984
(24.99)
.640
(16.26)
.304
(7.72)
.505
(12.83)
.666
(16.92)
.333
(8.46)
26
1.541
(39.14)
1.312
(33.32)
.968
(24.59)
.304
(7.72)
.505
(12.83)
.994
(25.25)
.333
(8.46)
44
2.088
(53.04)
1.852
(47.04)
1.508
(38.30)
.304
(7.72)
.505
(12.83)
1.534
(38.96)
.333
(8.46)
62
2.729
(69.32)
2.500
(63.50)
2.156
(54.76)
.304
(7.72)
.505
(12.83)
2.182
(55.42)
.333
(8.46)
78
2.635
(66.93)
2.406
(61.11)
2.062
(52.37)
.416
(10.57)
.615
(15.62)
2.079
(52.81)
.420
(11.18)
A
C
1
E
D
.050
(1.27)
.243
(6.17)
Socket End
B
.238
(6.05)
Socket
10°
Pin
F
1
1.000
(25.40)
G
.153±.005
(3.89±.13)
dia. holes
Pin End
78 size has 4 rows of contacts
Pin or Socket to Solder Cup, PCB Mount and 90° PCB Mount
Size
A
B
C
D
E
F
G
15
1.213
(30.81)
.984
(24.99)
.505
(12.83)
.666
(16.92)
.333
(8.46)
.757
(19.23)
.420
(10.67)
A
10°
10°
D
F
1
1
E
C
Mating Face
B
26
1.541
(39.14)
1.312
(33.32)
.505
(12.83)
.994
(25.25)
.333
(8.46)
1.085
(27.56)
.420
(10.67)
44
2.088
(53.04)
1.852
(47.04)
.505
(12.83)
1.534
(38.96)
.333
(8.46)
1.625
(41.28)
.420
(10.67)
62
2.729
(69.32)
2.500
(63.50)
.505
(12.83)
2.182
(55.42)
.333
(8.46)
2.273
(57.73)
.420
(10.67)
78
2.635
(66.93)
2.406
(61.11)
.615
(15.62)
2.079
(52.81)
.440
(11.18)
2.170
(55.12)
.527
(13.39)
.120±.005
(3.05±.13)
dia. holes
Solder Cup
.045 (1.14 )
.050
O.D. .026 (.66) (1.27)
Min. I.D.
.243
(6.17)
P.C. Tail
.025 (.64) dia.
.050
(1.27)
.238
(6.05)
G
.450
(11.43)
Termination End
.050
Boardlock (1.27)
Centerline
.243
(ø.125
(6.17)
thru x2)
.660 (16.76)
.400
(10.16)
.125
(3.18)
.358
(9.09)
Solder Cup
.150 (3.81)
.125±.020
(3.18±.508)
.100 (2.54)
ø.030 (.77)
.350
(8.89)
90° PCB Mount
.100 (2.54)
.350
(8.89)
.030 (7.62) Rd.
.100 (2.54)
.100 (2.54)
90° PCB Mount
78 line HD
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC13
High-Density Filtered Adapter
for Telecommunications
Within the telecommunications industry, it has been
standard practice to use an adapter (male/female) type
of EMI filtered connector as the interface between the
switching system electronics and the premise wiring.
These filtered adapters provide effective containment
of EMI compared to either D-subminiature or 50-position
“ribbon” contact type connectors.
The following several factors have mandated the
development of a new generation of filtered adapters.
Special Requirements
Mechanical Specifications
Shell . . . . . . . . . . . . Zinc or aluminum diecast, nickel
. . . . . . . . . . . . . . . . plated 150 µ inches (3.81 µm) min.
Insulators . . . . . . . . Thermoplastic, UL94V-0
■
Higher density wiring
■
The need for more contacts, usually
a multiple of 16
Contacts . . . . . . . . . One-piece, screw machined
. . . . . . . . . . . . . . . . Copper alloy, contact area plated
. . . . . . . . . . . . . . . . 50 µ inches (1.27 µm) gold
. . . . . . . . . . . . . . . . over 50 µ inches (1.27 µm) nickel
■
Higher reliability contact geometries
Ground Plane . . . . . Brass, solder plated
■
Bellcore TR-NWT-001089 requirements
Grounding
Springs . . . . . . . . . . Beryllium copper, tin plated per
. . . . . . . . . . . . . . . . MIL-T-10727
■
■
1000 volts AC withstand for one minute
■
2500 volts spike surge testing
Improved flammable resistant plastic insulators
API’s Spectrum Control brand, in response to these unique
requirements of the telecommunication industry,
has developed a new high-density filtered adapter.
Features
■
■
New ceramic technology and filter element
construction to accept higher voltages
Improved reliability compared to “ribbon”
type connectors
■
Integral ground plane and one-piece diecast
housing for the highest level of EMI integrity
■
More contacts/wires per square inch of panel space
through high-density arrangements
■
64 contact positions standard, with 78 positions
available by request in any filter combination
Operating
Temperature. . . . . . . -55°C to +125°C
Capacitor. . . . . . . . . High performance ceramic
. . . . . . . . . . . . . . . . feed-through utilizing ultra low
. . . . . . . . . . . . . . . . ESR design
Electrical Specifications
Rated Voltage. . . . . . 100 VDC
Current
Rating . . . . . . . . . . . 3 Amps
DC Resistance . . . . . 15 milliohm max.
Dielectric
Withstanding
Voltage . . . . . . . . . . 1000 VRMS (FCC Part 68 test)
Capacitance . . . . . . . 1000 pF, ±25%
Voltage Surge . . . . . meets 2500 volts surge (10/1000)
. . . . . . . . . . . . . . . . (See Wave form figure on
. . . . . . . . . . . . . . . . next page)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC14
50
High-Density Filtered Adapter
for Telecommunications
Insertion Loss (dB)
40
30
Filter Performance
20
Minimum Insertion Loss
20 MHz
50 MHz
100 MHz
500 MHz
1 GHz
2 GHz
5 GHz
Typical Insertion Loss
10
. . . . . . . . . . . . . . . . . . . . . . 7 dB
. . . . . . . . . . . . . . . . . . . . . 14 dB
. . . . . . . . . . . . . . . . . . . . . 20 dB
. . . . . . . . . . . . . . . . . . . . . 32 dB
. . . . . . . . . . . . . . . . . . . . . 35 dB
. . . . . . . . . . . . . . . . . . . . . 41 dB
. . . . . . . . . . . . . . . . . . . . . 39 dB
0
1MHz
10MHz
100MHz
Frequency
1GHz
5GHz
Above curves represent application of proper
grounding fundamentals, for assistance consult
with API.
Insertion loss measured per MIL-STD-220, no load, 50 ohm source
and load. Above data represents guaranteed minimum.
Pulse Wave Form* (10 x 1000)
Part Number for Ordering: #56-645-002
Peak Pulse Voltage, % Vpp
.050
(1.27)
Peak Value – Vpp
50
.243
(6.17)
.238
(6.05)
1.000
(25.40)
Side View
#4-40 UNC - 2B
Locking Inserts
4 plcs.
21
2
2.079
(52.81)
38
0
Test Waveform
Parameters
tr = 10µsec
tp = 1000µs
tr
100
.520
(13.21)
Hall Value –
Vpp
2
10 x 1000 Waveform
0
tp
1
et
2
3
4
t - - Time - - msec
5
6
* Reference Bellcore TR-NWT-1089, Vpp = 1000V
19
.440
(11.18)
41
60
Pin Face
77
58
Position numbers
shown for reference
2.635 (66.93)
2.062 (52.37)
.082
(2.08)
.190
(4.83)
.190
(4.83)
.615
(15.62)
.041
(1.04)
.0475 (1.21)
.416
(10.57)
.095 (2.41)
2.406 (61.11)
Socket Face
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC15
Typical Insertion Loss
80
50
K
C
40
30
A
20
10
0
Filter Selection
API’s Spectrum Control brand of Series 700 connectors
offer the highest performance filtering for all types of
professional applications.
80
Available in 9, 15, 25, 37 and 50 shell sizes
■
Variety of termination configurations including
right angle and straight PCB for both pin and
socket contact and as an adapter
1MHz
10MHz
100MHz
Frequency
Capacitive Filter
60
Insertion Loss (dB)
■
J
70
Features
■
E
Pi Filter
60
Insertion Loss (dB)
Series 700 High Performance
Filtered Connectors
70
50
L
20
10
0
1GHz
5GHz
B
30
The catalog data for this series is presented in
order of shell size, and grouped by pin and socket
contacts. Part numbers must be selected from the
tables within the series section.
5GHz
D
40
Capacitive and Pi type filters in a full range
of capacitance values
1GHz
1MHz
10MHz
F
N
100MHz
Frequency
Above curves represent application of proper
grounding fundamentals, for assistance consult
with API.
Insertion loss measured per MIL-STD-220, no load, 50ohm source and load.
Electrical Specifications: High Performance Connectors
Filter
Designations
Capacitance
Filter
Circuits
Value
Tol.
3 dB
Cut-off
Frequency
Max.
(MHz)
Dielectric
Working
WithVoltage DC
5
standing
-55°C to
MHz
Voltage
+125°C
10
MHz
Minimum Insertion Loss - Decibels (dB)
20
MHz
50
MHz
100
MHz
200
MHz
500
MHz
1
GHz
2
GHz
5
GHz
J
100 pF +100 -0%
32
300V
100V
—
—
—
2
6
11
27
40
43
40
A
310 pF
17
300V
100V
—
—
3
7
13
21
36
43
50
45
1000 pF +150 -0%
3.2
300V
100V
—
5
9
19
30
43
62
70
68
63
K
2500 pF +100 -0%
1.3
150V
50V
8
13
18
33
45
58
73
78
70
65
E
4000 pF +100 -0%
0.8
150V
50V
8
13
20
35
48
61
76
80
70
65
C
Pi
±20%
N
375 pF
±20%
14
600V
200V
—
—
2
7
13
20
29
35
30
29
L
500 pF
±20%
10.6
600V
200V
—
—
3
10
15
22
31
37
33
31
830 pF
±20%
6.4
600V
200V
—
4
9
16
22
28
35
39
38
36
F
C
B
1000 pF +100 -0%
3.2
600V
200V
—
5
10
17
23
30
37
43
44
42
D
5000 pF +100 -0%
0.64
300V
100V
10
16
22
30
35
41
50
52
52
50
Filter designation “G” for grounded contacts, “I” for insulated (not filtered) contacts.
Filter designation “O” for omitted contact and no hole in ground plane.
Above data represents guaranteed minimum.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC16
Series 700
Specifications and Connector Ordering
Mechanical Specifications
Shell . . . . . . . . . . . . Zinc or aluminum diecast, nickel plated
. . . . . . . . . . . . . . . . 150 µ inches (3.81 µm) min.
Insulators . . . . . . . . Glass-filled polyester,
. . . . . . . . . . . . . . . . flammability UL94V-0
Ordering Your Connector
STEP 1: SELECTING THE FILTER
■
Using the insert loss graphs on page FC20
determine which filters provide the required
attenuation at the troublesome frequency, while
not affecting the signal frequency by more than
3 to 6 dB.
■
Terminations . . . . . . Gold flash for PCB mount and solder
. . . . . . . . . . . . . . . . cups. Solder dipped also available.
Choose the filter type, either feed-through capacitor
or Pi. The Pi is generally considered better due to its
superior high frequency performance and steeper
curve. The feed-through capacitor is lower cost.
■
Select capacitance value.
Ground Plane . . . . . Brass, solder plated
■
Note the Spectrum letter designation for the
filter chosen from the table on page FC20.
Pin Contacts . . . . . . Copper alloy, 15 µ inches
. . . . . . . . . . . . . . . . (0.38 µm) gold plated * over nickel
Socket Contacts . . . . Copper alloy, 30 µ inches
. . . . . . . . . . . . . . . . (0.76 µm) gold plated * over nickel
. . . . . . . . . . . . . . . . * Heavier gold plating available upon request.
. . . . . . . . . . . . . . . . . . . . . . See pg. FC43: Connector Options
Grounding
Springs . . . . . . . . . . Beryllium copper, tin plated per
. . . . . . . . . . . . . . . . MIL-T-10727
Operating
Temperature. . . . . . . -55°C to +125°C
STEP 2: SELECTING THE CONNECTOR
■
Turn to the appropriate size section.
(9, 15, 25, 37, 50)
■
Choose either pin contacts (plug) or socket
contacts (receptacle).
Electrical Specifications
■
Choose the required termination type.
Current Rating . . . . 5 Amps
■
R.F. Current
Rating . . . . . . . . . . . 0.3 Amps
From the table on the appropriate connector
page, using the filter letter designation chosen
in step 1 above, select the part number.
STEP 3: SPECIFYING OPTIONS
Capacitors . . . . . . . . Proprietary barium titanate
. . . . . . . . . . . . . . . . ceramic formulations
Contact
Resistance . . . . . . . . 10 milliohms maximum
■
Refer to page FC43 for special options
including heavy gold plating, 4-40 mounting
threads, grounding brackets, hardware,
and others.
■
Most options are available within the standard
lead times.
■
Some options require a part number suffix,
while other combinations may require factory
assistance for part number assignment. If a
suffix is shown, add it to your selected part
number. If more than one option is needed,
consult with factory for part number
assignment.
UL Recognized. . . . . Under category of communication
. . . . . . . . . . . . . . . . circuit accessories, File #E149046
Inductance on
PI Filters . . . . . . . . . ~ 860 nH between 100 kHz and 1 MHz
Solder cups accept up to a 20 gauge wire.
Note:
For additional mechanical, electrical, and
environmental specifications, refer to page FC79.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC17
9
Shell Size
Series 700
Pin Contact
Printed Circuit Board Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
56-701-003
B
1000 pF C
C
1000 pF Pi
56-701-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-701-001
56-701-002
56-701-004
56-701-028
56-701-029
56-701-030
56-701-047
56-701-086
Mating Face
Side View
Termination Face
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
* 56-702-003
B
1000 pF C
C
1000 pF Pi
* 56-702-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
* 56-702-001
56-702-002
56-702-004
56-702-007
56-702-008
56-702-009
56-702-013
* 56-702-033
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Mating Face
Termination Face
Side
View
Bottom View
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC18
9
Shell Size
Series 700
Pin Contact
Solderless Wire Wrap
Spectrum Part Number
56-701
56-701
56-701
56-701
56-701
56-701
56-701
56-701
56-701
L
.500
-006
-007
-008
-009
-010
-037
-038
-039
-050
L
.375
Select one
-022
-023
-024
-025
-026
-034
-035
-036
-049
L
.250
Filter
Desig.**
Cap. Value
-018
A
310 pF Pi
B
1000 pF C
-020
C
1000 pF Pi
-021
D
5000 pF C
-031
E
4000 pF Pi
-032
F
830 pF C
-033
J
100 pF Pi
-048
K
2500 pF Pi
N
375 pF C
-017
-019
Solder Cup Termination
Spectrum
Part
Number
EMI Filter
Cap. Value
A
310 pF Pi
* 56-701-013
B
1000 pF C
C
1000 pF Pi
* 56-701-015
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
* 56-701-012
* 56-701-014
* 56-701-040
56-701-041
56-701-042
56-701-081
56-701-087
Side View
Termination Face
EMI Filter
Filter
Designation**
* 56-701-011
Mating Face
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Mating Face
Side View
Termination Face
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC19
9
Shell Size
Series 700
Socket Contact
Printed Circuit Board Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
56-703-003
B
1000 pF C
C
1000 pF Pi
56-703-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-703-001
56-703-002
56-703-004
56-703-022
56-703-023
56-703-024
56-703-036
56-703-047
Mating Face
Side View
Termination Face
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
* 56-704-003
B
1000 pF C
C
1000 pF Pi
* 56-704-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-704-001
56-704-002
56-704-004
56-704-007
56-704-008
56-704-009
56-704-018
56-704-035
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Termination Face
Mating Face
Side
View
Bottom View
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC20
9
Shell Size
Series 700
Socket Contact &
Pin/Socket Adapter
Solderless Wire Wrap
Spectrum Part Number
56-703
56-703
56-703
56-703
* 56-703
56-703
56-703
56-703
56-703
L
.500
-006
-007
-008
-009
-010
-031
-032
-033
-039
L
L
.375
.250
-016
-011
-017 -012
-018 -013
-019 -014
-020 * -015
-028 -025
-029 -026
-030 -027
-038 -037
Select one
Solder Cup Termination
Spectrum
Part
Number
* 56-706-001
56-706-002
* 56-706-003
56-706-004
* 56-706-005
56-706-006
56-706-007
* 56-706-008
56-706-009
56-706-017
* 56-705-001
56-705-002
* 56-705-003 €
56-705-004
* 56-705-005 €
* 56-705-008
56-705-009
56-705-010
56-705-026
56-705-049
Filter
Desig.**
A
B
C
D
E
F
J
K
N
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
Mating Face
Termination Face
Side View
EMI Filter
Filter
Designation**
A
B
C
D
E
F
J
K
N
L
Pin/Socket Adapter
Spectrum
Part
Number
EMI Filter
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
500
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
pF C
Mating Face
Termination Face
Side View
EMI Filter
Filter
Designation**
A
B
C
D
E
F
J
K
N
L
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
500
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
pF C
€ Also available through API’s authorized European distributors/agents.
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Socket Face
Pin Face
Side View
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC21
15
Shell Size
Series 700
Pin Contact
Printed Circuit Board Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
56-711-003
B
1000 pF C
C
1000 pF Pi
56-711-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-711-001
56-711-002
56-711-004
56-711-028
56-711-029
56-711-030
56-711-048
56-711-088
Mating Face
Side View
Termination Face
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
* 56-712-003
B
1000 pF C
C
1000 pF Pi
* 56-712-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
* 56-712-001
56-712-002
56-712-004
* 56-712-007
56-712-008
56-712-009
56-712-017
56-712-039
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Mating Face
Termination Face
Bottom View
Side
View
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC22
15
Shell Size
Series 700
Pin Contact
Solderless Wire Wrap
Spectrum Part Number
56-711
56-711
56-711
56-711
56-711
56-711
56-711
56-711
56-711
L
.500
-006
-007
-008
-009
-010
-037
-038
-039
-051
L
.375
Select one
-023
-024
-025
-026
-027
-034
-035
-036
-050
L
.250
Filter
Desig.**
Cap. Value
-019
A
310 pF Pi
B
1000 pF C
-021
C
1000 pF Pi
-022
D
5000 pF C
-031
E
4000 pF Pi
-032
F
830 pF C
-033
J
100 pF Pi
-049
K
2500 pF Pi
N
375 pF C
-018
-020
Solder Cup Termination
Spectrum
Part
Number
EMI Filter
Cap. Value
A
310 pF Pi
* 56-711-013
B
1000 pF C
C
1000 pF Pi
* 56-711-015
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-711-012
56-711-014
* 56-711-040
56-711-041
56-711-042
56-711-085
56-711-086
Side View
Termination Face
EMI Filter
Filter
Designation**
* 56-711-011
Mating Face
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Mating Face
Side View
Termination Face
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC23
15
Shell Size
Series 700
Socket Contact
Printed Circuit Board Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
56-713-003
B
1000 pF C
C
1000 pF Pi
56-713-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-713-001
56-713-002
56-713-004
56-713-021
56-713-022
56-713-023
56-713-037
56-713-045
Mating Face
Side View
Termination Face
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
* 56-714-003
B
1000 pF C
C
1000 pF Pi
* 56-714-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
* 56-714-001
56-714-002
56-714-004
* 56-714-006
56-714-007
56-714-008
56-714-017
56-714-031
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Mating Face
Termination Face
Side
View
Bottom View
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC24
15
Shell Size
Series 700
Socket Contact &
Pin/Socket Adapter
Solderless Wire Wrap
Spectrum Part Number
56-713
56-713
56-713
56-713
56-713
56-713
56-713
56-713
56-713
L
.500
-006
-007
-008
-009
-010
-030
-031
-032
-040
L
.375
-016
-017
-018
-019
-020
-027
-028
-029
-039
Select one
L
.250
-011
-012
-013
-014
-015
-024
-025
-026
-038
Solder Cup Termination
Spectrum
Part
Number
* 56-716-001
56-716-002
* 56-716-003
56-716-004
* 56-716-005
56-716-006
56-716-007
* 56-716-008
56-716-009
56-716-013
* 56-715-001
56-715-002
* 56-715-003 €
56-715-004
* 56-715-005 €
56-715-007
56-715-008
56-715-009
56-715-015
56-715-040
Filter
Desig.**
A
B
C
D
E
F
J
K
N
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
Mating Face
Termination Face
Side View
EMI Filter
Filter
Designation**
A
B
C
D
E
F
J
K
N
L
Pin/Socket Adapter
Spectrum
Part
Number
EMI Filter
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
500
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
pF C
Mating Face
Termination Face
Side View
EMI Filter
Filter
Designation**
A
B
C
D
E
F
J
K
N
L
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
500
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
pF C
€ Also available through API’s authorized European distributors/agents.
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Socket Face
Pin Face
Side View
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC25
25
Shell Size
Series 700
Pin Contact
Printed Circuit Board Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
56-721-003
B
1000 pF C
C
1000 pF Pi
56-721-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-721-001
56-721-002
56-721-004
56-721-033
56-721-034
56-721-035
56-721-063
56-721-111
Mating Face
Side View
Termination Face
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
* 56-722-003
B
1000 pF C
C
1000 pF Pi
* 56-722-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
* 56-722-001
56-722-002
56-722-004
* 56-722-008
56-722-009
56-722-010
56-722-027
56-722-060
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Termination Face
Mating Face
Bottom View
Side
View
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC26
25
Shell Size
Series 700
Pin Contact
Solderless Wire Wrap
Spectrum Part Number
56-721
56-721
56-721
56-721
56-721
56-721
56-721
56-721
56-721
L
.500
-006
-007
-008
-009
-010
-042
-043
-044
-066
L
.375
Select one
-028
-029
-030
-031
-032
-039
-040
-041
-065
L
.250
Filter
Desig.**
Cap. Value
-025
A
310 pF Pi
B
1000 pF C
-022
C
1000 pF Pi
-027
D
5000 pF C
-036
E
4000 pF Pi
-037
F
830 pF C
-038
J
100 pF Pi
-064
K
2500 pF Pi
N
375 pF C
-024
-026
Solder Cup Termination
Spectrum
Part
Number
EMI Filter
Cap. Value
A
310 pF Pi
* 56-721-013
B
1000 pF C
C
1000 pF Pi
* 56-721-015
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
* 56-721-012
56-721-014
* 56-721-045
56-721-046
56-721-047
56-721-070
56-721-112
Side View
Termination Face
EMI Filter
Filter
Designation**
* 56-721-011
Mating Face
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Mating Face
Side View
Termination Face
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC27
25
Shell Size
Series 700
Socket Contact
Printed Circuit Board Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
56-723-003
B
1000 pF C
C
1000 pF Pi
56-723-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-723-001
56-723-002
56-723-004
56-723-023
56-723-024
56-723-025
56-723-045
56-723-069
Mating Face
Side View
Termination Face
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
* 56-724-003
B
1000 pF C
C
1000 pF Pi
* 56-724-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
* 56-724-001
56-724-002
56-724-004
* 56-724-008
56-724-009
56-724-010
56-724-021
56-724-046
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Termination Face
Mating Face
Side
View
Bottom View
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC28
25
Shell Size
Series 700
Socket Contact &
Pin/Socket Adapter
Solderless Wire Wrap
Spectrum Part Number
* 56-723
56-723
* 56-723
56-723
* 56-723
* 56-723
56-723
56-723
56-723
L
.500
-006
-007
-008
-009
-010
-032
-033
-034
-048
L
.375
-017
-018
-019
-020
-021
-029
-030
-031
-047
Select one
L
.250
* -012
-013
* -014
-015
* -016
* -026
-027
-028
-046
Solder Cup Termination
Spectrum
Part
Number
* 56-726-001
56-726-002
* 56-726-003
56-726-004
* 56-726-005
56-726-006
56-726-007
* 56-726-008
56-726-009
56-726-021
* 56-725-001
56-725-002
* 56-725-003 €
56-725-004
* 56-725-005 €
* 56-725-019
56-725-020
* 56-725-021
56-725-064
56-725-073
Filter
Desig.**
A
B
C
D
E
F
J
K
N
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
Mating Face
Termination Face
Side View
EMI Filter
Filter
Designation**
A
B
C
D
E
F
J
K
N
L
Pin/Socket Adapter
Spectrum
Part
Number
EMI Filter
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
500
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
pF C
Mating Face
Termination Face
Side View
EMI Filter
Filter
Designation**
A
B
C
D
E
F
J
K
N
L
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
500
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
pF C
€ Also available through API’s authorized European distributors/agents.
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Socket Face
Pin Face
Side View
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC29
37
Shell Size
Series 700
Pin Contact
Printed Circuit Board Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
56-731-003
B
1000 pF C
C
1000 pF Pi
56-731-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-731-001
56-731-002
56-731-004
56-731-028
56-731-029
56-731-030
56-731-048
56-731-076
Mating Face
Termination Face
Side View
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
* 56-732-003
B
1000 pF C
C
1000 pF Pi
* 56-732-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-732-001
56-732-002
56-732-004
56-732-006
56-732-007
56-732-008
56-732-009
56-732-023
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Mating Face
Termination Face
Side View
Bottom View
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC30
37
Shell Size
Series 700
Pin Contact
Solderless Wire Wrap
Spectrum Part Number
56-731
56-731
56-731
56-731
56-731
56-731
56-731
56-731
56-731
L
.500
-006
-007
-008
-009
-010
-037
-038
-039
-051
L
.375
Select one
-023
-024
-025
-026
-027
-034
-035
-036
-050
L
.250
Filter
Desig.**
Cap. Value
-019
A
310 pF Pi
B
1000 pF C
-021
C
1000 pF Pi
-022
D
5000 pF C
-031
E
4000 pF Pi
-032
F
830 pF C
-033
J
100 pF Pi
-049
K
2500 pF Pi
N
375 pF C
-018
-020
Solder Cup Termination
Spectrum
Part
Number
EMI Filter
Cap. Value
A
310 pF Pi
* 56-731-013
B
1000 pF C
C
1000 pF Pi
* 56-731-015
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-731-012
56-731-014
* 56-731-040
56-731-041
56-731-042
56-731-060
56-731-077
Side View
Termination Face
EMI Filter
Filter
Designation**
* 56-731-011
Mating Face
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Mating Face
Side View
Termination Face
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC31
37
Shell Size
Series 700
Socket Contact
Printed Circuit Board Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
56-733-003
B
1000 pF C
C
1000 pF Pi
56-733-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-733-001
56-733-002
56-733-004
56-733-021
56-733-022
56-733-023
56-733-035
56-733-046
Mating Face
Side View
Termination Face
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
56-734-003
B
1000 pF C
C
1000 pF Pi
56-734-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-734-001
56-734-002
56-734-004
56-734-006
56-734-007
56-734-008
56-734-012
56-734-021
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Mating Face
Termination Face
Side View
Bottom View
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC32
37
Shell Size
Series 700
Socket Contact &
Pin/Socket Adapter
Solderless Wire Wrap
Spectrum Part Number
* 56-733
56-733
56-733
56-733
56-733
56-733
56-733
56-733
56-733
L
.500
-006
-007
-008
-009
-010
-030
-031
-032
-038
L
L
.375
.250
-016 * -011
-017 -012
-018 -013
-019 -014
-020 -015
-027 -024
-028 -025
-029 -026
-037 -036
Select one
Solder Cup Termination
Spectrum
Part
Number
* 56-736-001
56-736-002
* 56-736-003
56-736-004
* 56-736-005
56-736-006
56-736-007
* 56-736-008
56-736-009
56-736-015
* 56-735-001
56-735-002
* 56-735-003 €
56-735-004
* 56-735-005 €
* 56-735-008
56-735-009
56-735-010
56-735-025
56-735-034
Filter
Desig.**
A
B
C
D
E
F
J
K
N
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
Mating Face
Side View
Termination Face
EMI Filter
Filter
Designation**
A
B
C
D
E
F
J
K
N
L
Pin/Socket Adapter
Spectrum
Part
Number
EMI Filter
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
500
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
pF C
Mating Face
Side View
Termination Face
EMI Filter
Filter
Designation**
A
B
C
D
E
F
J
K
N
L
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
500
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
pF C
€ Also available through API’s authorized European distributors/agents.
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Socket Face
Side View
Pin Face
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC33
50
Shell Size
Series 700
Pin Contact
Printed Circuit Board Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
56-741-003
B
1000 pF C
C
1000 pF Pi
56-741-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-741-001
56-741-002
56-741-004
56-741-027
56-741-028
56-741-029
56-741-042
56-741-066
Mating Face
Termination Face
Side View
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
56-742-002
A
310 pF Pi
B
1000 pF C
56-742-004
C
1000 pF Pi
56-742-005
D
5000 pF C
56-742-006
E
4000 pF Pi
56-742-007
F
830 pF C
56-742-008
J
100 pF Pi
56-742-009
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-742-001
56-742-003
56-742-022
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Mating Face
Termination Face
Side View
Bottom View
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC34
50
Shell Size
Series 700
Pin Contact
Solderless Wire Wrap
Spectrum Part Number
56-741
56-741
56-741
56-741
56-741
56-741
56-741
56-741
56-741
L
.500
-006
-007
-008
-009
-010
-036
-037
-038
-045
L
.375
Select one
-022
-023
-024
-025
-026
-033
-034
-035
-044
L
.250
Filter
Desig.**
Cap. Value
-018
A
310 pF Pi
B
1000 pF C
-020
C
1000 pF Pi
-021
D
5000 pF C
-030
E
4000 pF Pi
-031
F
830 pF C
-032
J
100 pF Pi
-043
K
2500 pF Pi
N
375 pF C
-017
-019
Solder Cup Termination
Spectrum
Part
Number
EMI Filter
Cap. Value
A
310 pF Pi
* 56-741-013
B
1000 pF C
C
1000 pF Pi
* 56-741-015
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
* 56-741-012
* 56-741-014
56-741-039
56-741-040
56-741-041
56-741-063
56-741-067
Side View
Termination Face
EMI Filter
Filter
Designation**
* 56-741-011
Mating Face
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Mating Face
Side View
Termination Face
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC35
50
Shell Size
Series 700
Socket Contact
Printed Circuit Board Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
A
310 pF Pi
56-743-003
B
1000 pF C
C
1000 pF Pi
56-743-005
D
5000 pF C
E
4000 pF Pi
F
830 pF C
J
100 pF Pi
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-743-001
56-743-002
56-743-004
56-743-021
56-743-022
56-743-023
56-743-033
56-743-043
Mating Face
Side View
Termination Face
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
EMI Filter
Filter
Designation**
Cap. Value
56-744-002
A
310 pF Pi
B
1000 pF C
56-744-004
C
1000 pF Pi
56-744-005
D
5000 pF C
56-744-006
E
4000 pF Pi
56-744-007
F
830 pF C
56-744-008
J
100 pF Pi
56-744-009
K
2500 pF Pi
N
375 pF C
L
500 pF C
56-744-001
56-744-003
56-744-012
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Mating Face
Termination Face
Side View
Bottom View
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC36
50
Shell Size
Series 700
Socket Contact &
Pin/Socket Adapter
Solderless Wire Wrap
Spectrum Part Number
56-743
56-743
56-743
56-743
56-743
56-743
56-743
56-743
56-743
L
.500
-006
-007
-008
-009
-010
-030
-031
-032
-036
L
.375
-016
-017
-018
-019
-020
-027
-028
-029
-035
Select one
L
.250
-011
-012
-013
-014
-015
-024
-025
-026
-034
Solder Cup Termination
Spectrum
Part
Number
56-746-001
56-746-002
56-746-003
56-746-004
56-746-005
56-746-006
56-746-007
56-746-008
56-746-009
56-746-018
* 56-745-001
56-745-002
* 56-745-003
56-745-004
* 56-745-005
56-745-006
56-745-007
56-745-008
56-745-019
56-745-027
Filter
Desig.**
A
B
C
D
E
F
J
K
N
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
Mating Face
Termination Face
Side View
EMI Filter
Filter
Designation**
A
B
C
D
E
F
J
K
N
L
Pin/Socket Adapter
Spectrum
Part
Number
EMI Filter
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
500
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
pF C
Mating Face
Side View
Termination Face
EMI Filter
Filter
Designation**
A
B
C
D
E
F
J
K
N
L
Cap. Value
310
1000
1000
5000
4000
830
100
2500
375
500
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
pF Pi
pF C
pF Pi
pF C
pF Pi
pF C
pF Pi
pF Pi
pF C
pF C
Socket Face
Side View
Pin Face
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC37
D-Subminiature
Part Numbering System
Ordering Information
Example: 56-513-012-TI
56 -
5 1 3 - 0 12
Product
Series
4 = Series F
Ferrite
-
Shell Size
5 = Series 500
Low Profile
6 = Series 600
Hi-Density
7 = Series 700
High
Performance
Filtered
D-Subminiature
Connectors
- Standard connector
F - RoHS compliant version
Series 400 &
Series 500
0 = 9 Contacts
1 = 15 Contacts
2 = 25 Contacts
3 = 37 Contacts
Series 600
Hi-Density
0 = 15 Contacts
1 = 26 Contacts
2 = 44 Contacts
3 = 62 Contacts
4 = 78 Contacts
Options
TI
See options descriptions
on page FC43
add suffix ending
Series F
HD =Hi-Density
(15 socket only)
Line
Filtering
0 = All
positions
same
9 = Special
loading
(Series
600 only)
Series 700
0 = 9 Contacts
1 = 15 Contacts
2 = 25 Contacts
3 = 37 Contacts
4 = 50 Contacts
Contact Type/Termination
1
2
3
4
5
6
7
=
=
=
=
=
=
=
Pin to solder cup
Pin to 90° PCB mount
Socket to straight PCB mount
Socket to 90° PCB mount
Pin-socket adapter
Socket to solder cup
Pin to straight PCB mount
Capacitance
Value
Series 400
01 = Always
Series 500
10 = 120 pF
11
12
13
14
=
=
=
=
440 pF
840 pF
1000 pF
1500 pF
Series 600
15 = 85 pF FT
16 = 180 pF FT
18 = 1000 pF FT
19 = 4000 pF FT
20 = Insulated
contact
Series 700
See filter specification chart on
page FC20 and
select part numbers
from Series 700
charts pages
FC22-FC41.
Series 500
TI = 4-40 threads on mounting
flange (.125" hole if not
selected)
GBL = Grounded board lock
includes 4-40 threads
(available only on 90° PCB)
GBLF = Grounded board lock
and ferrite slab
provides enhanced LC
performance. (Available
only on 90° PCB)
Series 600 Hi-Density
LI = 4-40 UNC inserts
S = Solder dipped tails
50G = 50 µ (1.27 µm) gold
GBL = Ground board lock
Series 700
LI = 4-40 UNC inserts
LIM = Metric M3.0 self-locking threads
GB = Metal bracket provides ground
connection, includes 4-40
self-locking threads (for right angle
mount only)
GBL = Grounded board lock
(right angle)
GBL6 = for .062" boards (straight
PCB mount) (1.57mm)
GBL9 = for .093" boards (straight
PCB mount (2.36mm)
50G = 50 µ (1.27 µm) gold plating
S = Solder dipped tails
JS = Jackscrew mounting
For option combinations, consult factory.
Styles available for:
Series 400 only 2, 3, 4, 7
Series 500 only 2, 3, 4 & 7
Series 600 only 1, 2, 3, 4, 5
Series 700 1 thru 7
Note: 1 can be Pin to solder cup
or Pin to PCB for Series 700.
See charts pages FC22-FC41.
To assist your efforts in selecting the correct Filtered Connector to meet your needs,
we have developed a part numbering system. All of the standard products are shown
in their respective catalog pages.
Part number 56-513-012-TI represents a Series 500 connector with 15 contacts
in a socket to straight PCB mount configuration. All connector positions have
a capacitance value of 840 pF and there are 4-40 threads on mounting flange.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC38
Threaded Inserts
Adapter
Connector
D-Subminiature
Connector Options
Locking
Insert
Threaded Inserts
■
■
■
Available on Series 500, 600 & 700
#4-40 UNC or metric M3.0 threaded
inserts in mounting flanges
Allows ease of panel-assembly
Plated steel inserts with last thread
upset for torque
Grounding Bracket
■
■
■
■
For right angle mount PCB connectors, available
on Series 700
Metal bracket in place of plastic
Provides ground connection direct
from circuit board
Allows shell grounding to board
Includes 4-40 threads
Stand-off with Board Lock Feature
■
■
■
■
For straight PCB connectors, available on Series 700
Allows shell grounding to board
Eliminates stress on filter terminations
Tin plated brass stand-off with snap-in feature
Available for .062" (1.57mm) or .093" (2.36mm)
thick boards
Locking
Insert
4 Places
2 Places
Grounding Brackets
.265
(6.73)
Ø.125 (3.18)
thru (typ)
Flame
retardant
lead spacer
(Phenolic)
Connector flange
.540
(13.72)
Ø.160 (4.06)
thru (typ)
A
B
#4-40 UNC-2B
eyelets (typ)
.375
(9.53)
.250 (6.35)
Size
9
15
25
37
.984
1.312
1.852
2.500
A
Connector
flange
Right angle
bracket
.086 (2.18)
(24.99)
(33.32)
(47.04)
(63.50)
B
1.214
1.542
2.088
2.730
(30.84)
(39.17)
(53.04)
(69.34)
Stand-off with Board Lock
Grounding Bracket with Board Lock
■
■
■
Snap-in, no hardware needed,
4-40 threads included
For use on .062" (1.57mm) thick boards
Gold Plating
■
Available on Series 600 & 700
High reliability applications,
50µ" (1.27 µm) gold over 50µ" (1.27 µm) nickel
Solder Dipped Tails
■
Available on Series 600 & 700 connectors
Solder dipped tails added to standard gold flash
Water Block
■
.440±.010
(11.18±.25))
For right angle mount PCB connectors, available
on Series 500 & 700
Metal bracket provides grounding
Consult API engineers for specifics.
Internally sealed in accordance with NEMA
Standard Rain Test section 6.4 (also UL50
part 28 ram test for submersion, section 6.10.1)
For .062 (1.57)
or .093 (2.36)
thick PC board
.187
(4.75) dia.
stand-off
For .120 (3.05) dia.
mounting hole
Grounding Bracket with Board Lock
(see above for grounding bracket details)
#4-40 UNC - 2B
2 places
.170
(4.32)
.494
(12.55)
For .062 (1.57)
thick board
For .125 (3.18) Ø
mounting
hole
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC39
Filtered Combo
D-Subminiature Connectors
API’s Spectrum Control line of filtered combo D-subs
provide high insertion loss with capacitive filtering. These
connectors are available with 20 Amp power contacts or
40 Amp power contacts. Configurations include male
and female versions with straight PC terminals, right
angle PC terminals or solder cup terminals. Standard
D-sub shell sizes provide intermateability with unfiltered
connectors. High strength epoxy potting protects
ceramic elements.
Capacitive filtering is available in 470, 820,
1000 and 1500 pF. Additional capacitance ranges
and configurations can be provided upon request.
Please consult factory for more information.
Mechanical Specifications
■
Telecommunications base station equipment
■
Switching and transmission equipment
Shell . . . . . . . . . . . . . . . . . Steel, tin plated
Power Contacts . . . . . . . . . Brass, gold plated .000030 in.
(0.762 µm) minimum
Signal Contacts . . . . . . . . . Pin: brass, gold plated
. . . . . . . . . . . . . . . . . . . . . .000015 in. (0.762 µm) min.
. . . . . . . . . . . . . . . . . . . . . Socket: copper alloy, gold plated
.000030 in. (0.762 µm) min.
Insulator . . . . . . . . . . . . . . Glass-filled polyester,
. . . . . . . . . . . . . . . . . . . . . flammability UL94V-0
Operating Temperature . . . . -55°C to +125°C
Capacitors . . . . . . . . . . . . . MLCC
■
Power supplies
Electrical Specifications
■
Industrial equipment
■
Computer work stations
Operating Voltage . . . . . . . 200 VDC
Current Rating* . . . . . . . . . 40 Amp power/ 5 Amp signal
Insulation Resistance . . . . . 1 Gohm at 100 VDC
Capacitance . . . . . . . . . . . . See below for MLCC values.
. . . . . . . . . . . . . . . . . . . . . For other capacitance values
. . . . . . . . . . . . . . . . . . . . . contact factory.
Dielectric Withstanding
Voltage . . . . . . . . . . . . . . . 600 VDC
Applications
Ordering Information
Example: 563A03W3101GBL9
56 * 3
A:
B:
C:
G:
H:
J:
N:
A
03W3
Pin - PCB Power
Pin - Right Angle Power
Pin - Solder Cup Power
Socket - PCB Power
Socket - Right Angle Power
Socket - Solder Cup Power
Custom Combination
* Insert “F” for RoHS compliant
101
*30 Amp available. Consult factory.
GBL9
Options
Contact
Arrangement
03W3
05W5
09W4
24W7
=
=
=
=
3W3
5W5
9W4
24W7
Capacitance
Value
MLCC
201 =
202 =
203 =
204 =
470 pF
820 pF
1000 pF
1500 pF
LI = 4-40 UNC inserts
LIM = Metric M3.0 self-locking threads
GB = Metal bracket provides ground connection,
includes 4-40 self-locking threads (for right
angle mount only)
GBL = Grounded board lock (right angle)
GBL6 = for .062" boards (straight PCB mount)
GBL9 = for .093" boards (straight PCB mount
50G = 50 µ (1.27 µm) gold plating
S = Solder dipped tails
JS = Jackscrew mounting
For option combinations, consult factory.
See options descriptions on page FC43 add suffix ending
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC40
Filtered Combo D-Subminiature Connectors
3W3
Plug - Solder Cup
1.541±.015
(39.14±0.38)
1.312
(33.32)
Epoxy
4-40 Clinch Nut
2 Plc.
Mating Face
.329
(8.36)
.500±.015
(12.70±0.38)
.269
(6.83)
Typ.
.995
(25.27)
.233±.006
(5.92±0.15)
.055±.020
(1.40±0.51)
1
.036±.010
(0.92±0.25)
.217
(5.50)
.809±.025
(20.55±0.64)
267122-1
.328±.021
(8.33±0.53)
Plug
Assembly
Contact
3 Plc.
.425
(10.80)
Max.
.128
(3.24)
Typ.
Ø
1.025
(26.04)
Max.
.089
(2.26)
1.134
(28.80)
100° Typ.
.449
(11.40)
.130
(3.30)
4 Plc.
.225
(5.72)
.120
(3.05)
2 Plc.
Ø
1.312
(33.32)
Recommended Panel Cutout
Only represents a few of our available configurations. Consult factory for more information.
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC41
Filtered Combo D-Subminiature Connectors
3W3
Plug - Right Angle
.995
(25.27)
Contact
3 Plc.
Plug Assembly
.217
(5.50)
.036±.010
(0.92±0.25)
.233±.006
(5.92±0.15)
.995
(25.27)
.269
.269
(6.83)
(6.83)
Typ.
Typ.
.120
(3.05)
2 Plc.
Ø
.055±.020
(1.40±0.51)
.425
(10.80)
Max.
.500±.015
(12.70±0.38)
.329
(8.36)
Mating Face
Epoxy
1.312
(33.32)
.125±.025
(3.18±0.64)
Typ.
.500
(12.70)
2 Plc.
1.541±.015
(39.14±0.38)
.089
(2.26)
1.134
(28.80)
100° Typ.
.449
(11.40)
ø .0625±.0010
(1.588±0.025)
2 Plc.
.130
(3.30)
4 Plc.
.225
(5.72)
.120
(3.05)
2 Plc.
Ø
1.312
(33.32)
Recommended Panel Cutout
Only represents a few of our available configurations. Consult factory for more information.
.538
(13.66)
.269
(6.83)
ø .077 (1.96)
ø .004 (.01)
3 Plc.
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC42
Filtered Combo D-Subminiature Connectors
5W5
Plug - Vertical
ø .128 (3.25)
Contact
5 Plc.
.125±.025
(3.175±0.64)
.645
(16.38)
2 Plc.
.042±.010
(1.07±0.25)
1
.217
(5.51)
93931-1
1.040
(26.42)
5 Plc.
Rear
Shell
.228±.004
(5.79±0.10)
1.535
(38.99)
.500±.015
(12.70±0.38)
.330
(8.38)
1.852
(47.04)
4-40 UNC
Standoff
2 Plc.
2.090±.015
(53.09±0.38)
.00
(.000)
.356
(9.04)
.624
(15.85)
.892
(22.66)
1.160
(29.46)
1.496
(38.00)
ø .140 (3.56)
ø .010 (0.25)
ø .125 (3.56)
2 Holes
ø .010 (0.25)
1.852
(47.04)
Recommended PCB Layout
Only represents a few of our available configurations. Consult factory for more information.
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC43
Filtered Combo D-Subminiature Connectors
9W4
Socket - Solder Cup
Solder Cup
5 Plc.
Power Contact
4 Plc.
.447±.021
(11.35±0.53)
.941±.025
(23.90±0.64)
Typ.
.223±.021
(5.66±0.53)
1
.036±.010
(0.92±0.25)
.242±.004
(6.15±0.10)
Front Shell
2.090±.015
(53.09±0.38)
1.852
(47.04)
1.510
(38.35)
Insert
Mating Face
.055±.020
(1.40±0.51)
Rear
Shell
4-40 Clinch Nuts
2 Plc.
.056
(1.42)
M
2
A3
1
A2
ø .128±.003
(3.25±0.08)
4 Plc.
A1
.310
.606±.015
(7.87) (15.39±0.38)
5
4
3
ø .062±.001
(1.57±0.03)
5 Plc.
.089
(2.26)
.112
(2.84)
Signal Contact
5 Plc.
.570 (14.48)
.306 (7.77)
0
.379 (9.63)
.325 (8.25)
.271 (6.88)
.217 (5.51)
.163 (4.14)
.570 (14.48)
.112
(2.84)
1.674
(42.51)
10° Typ.
ø .120
(3.05)
2 Holes
.225
(5.72)
1.852
(47.04)
Recommended Panel Cutout
.132
(3.35)
Typ.
Only represents a few of our available configurations. Consult factory for more information.
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC44
Filtered Combo D-Subminiature Connectors
9W4
Socket - Vertical
Boardlock
2 Plc.
.891±.025
(22.63±0.64)
Typ.
ø .040±.002
(1.02±0.05)
5 Plc.
Signal
Contact
5 Plc.
ø .128±.003
(3.25±0.08)
4 Plc.
Power Contact
4 Plc.
.383±.021
(9.72±0.53)
4 Plc.
.397±.021
(10.08±0.53)
5 Plc.
1
.036±.010
(0.92±0.25)
.325
(8.26)
.300
(7.62)
2 Plc.
.242±.004
(6.15±0.10)
Front Shell
.056
(1.42)
2.090±.015
(53.09±0.38)
1.852
(47.04)
1.510
(38.35)
Insert
M
2
A3
1
Mating Face
A2
Rear
Shell
.055±.020
(1.40±0.51)
4-40 Standoff
2 Plc.
A1
.310
.606±.015
(7.87) (15.39±0.38)
.112
(2.84)
1.852
(47.04)
Recommended Panel Cutout
ø .120
(3.05)
2 Holes
.132
(3.35)
Typ.
.326 (23.52)
.570 (14.48)
.306 (7.77)
.379 (9.63)
.325 (8.25)
.271 (6.88)
.217 (5.51)
.163 (4.14)
10°
Typ.
.225
(5.72)
.570 (14.48)
1.674
(42.51)
.570 (14.48)
.306 (7.77)
0
3
.326 (23.52)
.089
(2.26)
4
.379 (9.63)
.325 (8.25)
.271 (6.88)
.217 (5.51)
.163 (4.14)
.112
(2.84)
.570 (14.48)
5
.056 (1.42)
.000 (0.00)
.056 (1.42)
ø .055 (1.40)
ø .004 (0.10)
5 Plc.
ø .140 (3.56)
ø .010 (0.25)
4 Plc.
Posn. 1 ø .125±.003
(3.18±0.08)
ø .010 (0.25)
2 Plc.
Recommended PC Board Mounting Dimensions
Only represents a few of our available configurations. Consult factory for more information.
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC45
Filtered Combo D-Subminiature Connectors
9W4
Plug - Right Angle
.240
(6.10)
Power Pin
4 Plc.
L Bracket
2 Plc.
Signal Pin
5 Plc.
.560
(14.22)
2 Plc.
Threaded Fastener
2 Plc.
.042±.010
(1.07±0.25)
Lockwasher
2 Plc.
.228±.004
(5.79±0.10)
Screwlock
2 Plc.
2.090±.015
(53.09±0.38)
1.535
(38.99)
A1
A2
1
A3
.330
(8.38)
.055±.020
(1.40±0.51)
Mating
Face
3
2
4
.262
(6.65)
Rear Shell
Front
Shell
A4
.500±.015
(2.70±0.38)
5
.125±.025
(3.18±0.64)
Typ.
.216
(5.48)
2 Plc.
Boardlock
2 Plc.
.128±.002
(3.25±0.05)
4 Plc.
1.852
(47.04)
.040
(1.02)
5 Plc.
.270
(6.86)
Epoxy
.056
(1.41)
3 Plc.
.500
(12.70)
4 Plc.
.056
(1.41)
2 Plc.
1.852
(47.04)
1.140
(28.96)
.841
(21.36)
.926
(23.52)
.054
(1.37)
4 Plc.
.570
(14.48)
.056
(1.42)
Typ.
.264
(6.71)
.230
(5.84)
4 Plc.
.112
(2.84)
Typ.
ø .143±.003
(3.63±0.08)
ø .006 (0.15)
4 Plc.
ø .055±.003
(1.40±0.08)
ø .006 (0.15)
5 Plc.
Recommended PC Board Mounting Dimensions
ø .125±.003
(3.18±0.08)
ø .010 (0.25)
2 Plc.
Only represents a few of our available configurations. Consult factory for more information.
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC46
Filtered Combo D-Subminiature Connectors
24W7
Socket - Solder Cup
Solder Cup
17 Plc.
Power Contact
2 Plc.
Rear
Shell
4-40 Clinch Nuts
2 Plc.
.988±.025
(25.09±0.61)
Typ.
.036±.010
(0.92±0.25)
.242±.004
(6.15±0.10)
Front Shell
Mating Face
2.063
(52.40)
Insert
.056
(1.42)
Typ.
A7
.270
(6.86)
Typ.
A6
A5
A4
.055±.020
(1.40±0.51)
A3
A2
A1
.422
.606±.015
(10.72) (15.39±0.38)
17
.112
(2.84)
Typ.
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
ø .128±.003
(3.25±0.08)
7 Plc.
ø .062±.001
(1.57±0.03)
17 Plc.
.109
(2.76)
Typ.
ø .494±.021
(12.55±0.53)
17 Plc.
Signal Contact
17 Plc.
2.406
(61.11)
2.638±.015
(67.01±0.38)
.094
(2.39)
Typ.
.323±.021
(8.20±0.53)
2.218
(56.34)
100° Typ.
.120
(3.05)
2 Plc.
Ø
.555
(14.10)
.278
(7.06)
2 Plc.
2.406
(61.11)
Recommended Panel Cutout
.132
(3.35)
4 Plc.
Only represents a few of our available configurations. Consult factory for more information.
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC47
D-Subminiature
Adapter Test Kit & Hardware
Adapter Test Kit
Specially designed for EMI evaluation process
Adapter Test Kit
■
Male/female adapter part
■
Easily plugged into equipment under
testing conditions
Hardware
■
Ideal for new products and retrofitting
Designed to provide simple and effective mounting
■
Each adapter test kit includes:
Hexagonal Spacer
■
20 filtered adapters
■
Tapped spacer fits between flanges
■
Four shell sizes 9, 15, 25 and 37
■
Provide retrofit of 4-40" threads
Four filter ranges:
Series 700
- 310 pF Pi
■
Two spacers per adapter required,
packaged in bulk
■
- 830
Hexagonal Spacer
pF FT
.120 Thru-hole
- 1000 pF Pi
- 4000 pF Pi
Ordering Information
Description
Adapter test kit
Adapter test kit with Jackscrew
Includes 40 pcs. 56-201-006
Hexagonal Spacer
Jackscrew Mounting Hardware
For .312" (7.92 mm) length
Jackscrew Mounting Hardware
For .688" (17.47 mm) length
Tubular Spacer
Adapter
Hexagonal
Spacer
API Part Number
#4-40 UNC
Thru-hole
56-700-002
56-700-002-JS
Jackscrew Mounting Hardware
■
Male/female jackscrews
56-201-001 (1 per)
■
Standard 4-40 threads for compatibility
56-201-004 (1 per)
■
Two male thread lengths available
56-201-006 (2 per)
■
Two screws per adapter required
56-201-003 (1 per)
■
Lockwasher included, packaged in bulk
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC48
Micro D Series
Filtered Connectors
For designs that require even smaller connector
packages, API’s Spectrum Control brand has designed
a line of filtered Micro D-Subminiature connectors.
This line of connectors offers a range of reliable
filtering options, including capacitive and ESD versions,
and several sizes and termination options. API has
a Micro D-sub connector to satisfy your smallest
space constraints.
Features
Mechanical Specifications
Shell . . . . . . . . . . . . . . . Aluminum, electroless nickel
. . . . . . . . . . . . . . . . . . . plated 500 µ in (12.7 µm) minimum
Insulator . . . . . . . . . . . . High temperature plastic,
. . . . . . . . . . . . . . . . . . . flammability UL94V-0
■
Light weight
■
Compact size
■
Environmentally sealed contact area when mated
■
Corrosion resistant
■
Durable (500 cycles min.)
■
Superior electrical performance
Electrical Specifications
■
RoHS compliant
Operating Voltage . . . . . 100 VDC
Contacts . . . . . . . . . . . . Copper alloy, gold plated 50 µ in
. . . . . . . . . . . . . . . . . . . (1.27 µm) minimum
Potting . . . . . . . . . . . . . Flammability UL94V-0
Interfacial Seal . . . . . . . . Silicon
Dielectric
Withstanding Voltage . . . 300 VDC
Current Rating. . . . . . . . 3 Amps
Insulation Resistance . . . 5G ohms @ 100 VDC
Ordering Information
Example: 56-F011-110-JP
56
F 0 1 1
Filtered
Connectors
Micro D
RoHS
Compliant
Shell Size/
Number of
Contacts
0
1
2
3
4
5
- 9 contacts
- 15 contacts
- 21 contacts
- 25 contacts
- 31 contacts
- 37 contacts
Contact Type/Termination
1
2
3
4
6
7
8
9
-
Pin to solder cup
Pin to right angle*
Socket to PC tail*
Socket to right angle*
Socket to solder cup
Pin to PC tail*
Pin to pigtail
Socket to pigtail
* Right angle and PC tail length is 0.109. Other lengths available, consult factory.
This part number represents a micro D-sub connector with a shell size of 15
and a pin to solder cup configuration. All lines are filtered with same capacitance value, which is 100 pF COB. The connector includes an optional #2-56
jack post.
1 10
Line Filtering
1 - All positions same
2 - Select load
-
Capacitance
Value/Type
High Performance
01 - 100 pF FT
02 - 470 pF FT
03 - 820 pF FT
04 - 1500 pF FT
05 - 4700 pF FT
Standard
Performance
10 - 100 pF COB
11 - 470 pF COB
12 - 820 pF COB
13 - 1500 pF COB
14 - 4700 pF COB
JP
Options
JP - #2-56 jack post
JS - #2-56 jackscrew
TI - Threaded insert
JT - Jack post and
threaded insert
GB - Grounding Bracket
All capacitance values ±20% @ 25°C
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC49
Micro D Series Filtered Connectors
High Performance
Capacitance
Working
Dielectric
Voltage DC
Withstanding -55°C to
Voltage
+125°C
Filter
Designation
Type
Value
Tolerance
01
FT
100 pF
±20%
300V
100V
02
FT
470 pF
±20%
300V
100V
03
FT
820 pF
±20%
300V
04
FT
1500 pF
±20%
05
FT
4700 pF
±20%
Standard Performance
Capacitance
5
MHz
Minimum Insertion Loss - Decibels (dB)
50 ohm system per MIL-STD-220 (no load)
10
MHz
20
MHz
50
MHz
—
—
—
—
—
—
2
8
100V
—
2
6
13
300V
100V
—
5
10
300V
100V
8
14
20
Working
Dielectric
Voltage DC
Withstanding -55°C to
Voltage
+125°C
Type
Value
Tolerance
10
COB
100 pF
±20%
300V
470 pF
±20%
300V
100V
—
—
100V
—
200
MHz
500
MHz
1
GHz
1
6
14
20
14
20
28
34
19
25
33
39
18
24
30
38
44
28
34
40
48
54
Minimum Insertion Loss - Decibels (dB)
50 ohm system per MIL-STD-220 (no load)
Filter
Designation
5
MHz
100
MHz
10
MHz
20
MHz
50
MHz
—
—
—
2
100
MHz
200
MHz
500
MHz
1
GHz
1
6
14
20
8
14
20
28
32
11
COB
12
COB
820 pF
±20%
300V
100V
—
2
6
13
19
25
32
32
13
COB
1500 pF
±20%
300V
100V
—
5
10
18
24
30
32
32
14
COB
4700 pF
±20%
300V
100V
8
14
20
28
32
32
32
32
E
F
G
H
4
5
7
8
10
11
12
13
15
16
18
19
.200
(5.08)
.350
(8.89)
.500
(12.70)
.600
(15.24)
.750
(19.05)
.900
(22.86)
.250
(6.35)
.400
(10.16)
.550
(13.97)
.650
(16.51)
.800
(20.32)
.950
(24.13)
Right Angle PCB
Receptacle
Plug
Size
9
15
21
25
31
37
A
B
.775
(19.69)
.925
(23.50)
1.075
(27.31)
1.175
(29.85)
1.325
(33.66)
1.475
(37.47)
.565
(14.35)
.715
(18.16)
.865
(21.97)
.965
(24.51)
1.115
(28.32)
1.265
(32.13)
C
(RCPT)
.388
(9.86)
.538
(13.67)
.688
(17.48)
.788
(20.02)
.938
(23.83)
1.088
(27.64)
C
(Plug)
.330
(8.38)
.480
(12.19)
.630
(16.00)
.730
(18.54)
.880
(22.35)
1.030
(26.16)
D
.390
(9.91)
.540
(13.72)
.690
(17.53)
.790
(20.07)
.940
(23.88)
.1.090
(27.69)
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC50
Size
Micro D Series
Filtered Connectors
9
15
21
25
31
37
A
B
.775
(19.69)
.925
(23.50)
1.075
(27.31)
1.175
(29.85)
1.325
(33.66)
1.475
(37.47)
.565
(14.35)
.715
(18.16)
.865
(21.97)
.965
(24.51)
1.115
(28.32)
1.265
(32.13)
C
(RCPT)
.388
(9.86)
.538
(13.67)
.688
(17.48)
.788
(20.02)
.938
(23.83)
1.088
(27.64)
C
(Plug)
.330
(8.38)
.480
(12.19)
.630
(16.00)
.730
(18.54)
.880
(22.35)
1.030
(26.16)
D
.390
(9.91)
.540
(13.72)
.690
(17.53)
.790
(20.07)
.940
(23.88)
.1.090
(27.69)
Dimensions in inches (mm)
Vertical PCB
Receptacle
Plug
Solder Cup
Receptacle
Plug
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC51
Micro D Series Filtered Connectors
Options
JP - #2-56 Jack Post M83513/05-07
JS - #2-56 Jack Screw M83513/05-05
TI - Threaded Insert Receptacle
TI - Threaded Insert Plug
GB - Ground Bracket Receptacle
GB - Ground Bracket Plug
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC52
Micro D Series Filtered Connectors
Board and Panel Cutouts
Pin Connector Shown
Vertical PCB Layouts
9 Contacts
15 Contacts
21 Contacts
25 Contacts
31 Contacts
37 Contacts
Pin Connector Shown
Right Angle PCB Layouts
9 Contacts
25 Contacts
15 Contacts
21 Contacts
31 Contacts
37 Contacts
Notes: PC Tail Diameter 0.018 ±0.002 (0.46 ±0.05) Contact numbers shown are pin connector.
Reverse for socket. Patterns shown are for connector mounting side of PC board.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC53
Filtered Miniature
Ribbon Connectors
Features
40
Typical Insertion Loss
35
30
25
Insertion Loss (dB)
Filtered miniature ribbon connectors are fully intermateable
and interchangeable with existing standard product. Rugged
design construction and predictable capacitive filter
performance is available in right-angle and male/female
adapter versions.
Applications for this type of connector are widely
diversified and include all phases of the telecommunications
industry including original telephone manufacturing, operating
telephone companies, cable reclamation, cable manufacturing
and bay connectorization. The filtered miniature ribbon
connector line is also ideally suited for use in printers,
computer terminals, test equipment, business and copying
machines, telemetering, and various equipment used in
the security industry.
820 pF
20
470 pF
220 pF
15
100 pF
10
■
Lower installed cost
■
Assists with FCC Part 15; available for Part 68
requirements
■
Applicable for VDE specifications 0871, 0875-0878,
Vfg Federal Regulations and VCCI noise requirements
■
Drop-in replacement, matched footprint
Electrical Specifications
■
All circuit lines filtered
■
Connector body is recognized under the
Component Recognition Program of Underwriters
Laboratories, Inc.
■
Plastic components are UL94V-0 rated
■
Connector body is certified by Canadian Standard
Association
Operating
Temperature . . . . . . . . . . . . -55°C - 105°C
Dielectric
Withstanding
Voltage . . . . . . . . . . . . . . . 1000 VAC min per
. . . . . . . . . . . . . . . . . . . . . (FCC Part 68 test)
Capacitance . . . . . . . . . . . . 100 pF, 220 pF, 470 pF,
. . . . . . . . . . . . . . . . . . . . . 820 pF, ±15% (adapter),
. . . . . . . . . . . . . . . . . . . . . ±20% (connector)
Dissipation Factor . . . . . . . 2.5% max (adapter)
. . . . . . . . . . . . . . . . . . . . . 5% max (connector)
Mechanical Specifications - Adapter
5
0
1 MHz
10 MHz
Frequency
100 MHz
1 GHz
Shell . . . . . . . . . . . . . . . . . Zinc
Thermoplastic
Insert. . . . . . . . . . . . . . . . . Black, high strength
Contacts . . . . . . . . . . . . . . Copper alloy
Contact Plating . . . . . . . . . 30uin (.76um) (min.)
. . . . . . . . . . . . . . . . . . . . . gold over nickel
Mechanical Specifications - Connector
Shell . . . . . . . . . . . . . . . . . Steel, tin plated
Thermoplastic
Insert. . . . . . . . . . . . . . . . . Blue, 30% glass filled
Contacts . . . . . . . . . . . . . . Phosphor bronze
Contact Plating . . . . . . . . . Gold flash (<10 µ in) over nickel
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC54
Filtered Miniature Ribbon Connectors
50 Position
Pin
Contact
2.946
(74.84)
PCB Edge
2.041
(51.84)
(plug)
.085
(2.16)
TYP
ø .126 ± .002
(3.20 ± 0.05)
2 PLC
.450
(11.43) MAX
2 PLC
.453
(11.50)
.169 ± .003
(4.29 ± 0.08)
Recommended PCB Layout
.085
(2.15)
2 PLC
ø.035 ± .002
(0.89 ± 0.05)
50 PLC
Filter
Top
2.949 ± .010
(74.90 ± 0.25)
3.264 ± .015
(82.90 ± 0.38)
100˚ TYP
.155
(3.94)
.531
(13.50)
Screw
#4-40 thread
2 PLC
2.589
(65.75)
1
25
26
50
.025
(0.64)
TYP
.085 ± .010
(2.16 ± 0.25)
TYP
.610 ± .015
(15.50 ± 0.25)
Boardlock
2 PLC
Contact
50 PLC
Mating Face
Shell
Bottom
.305 ± .010
(7.75 ± 0.25)
TYP
Pin Organizer
.478 ± .010
(12.14 ± 0.25)
2 PLC
ø.130
(3.30)
2 PLC
Position 1
Filter
.559
(14.21)
Dimensions in inches (mm)
Part Number
56-882-002
56-882-003
56-882-004
56-882-005
Capacitance Value
100 pF, ±20%
220 pF, ±20%
470 pF, ±20%
820 pF, ±20%
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC55
Filtered Miniature Ribbon Connectors
50 Position
Socket
Contact
2.946
(74.84)
PCB Edge
(receptacle)
.085
(2.16)
TYP
ø.126 ± 0.02
(3.20 ± 0.05)
2 PLC
Recommended PCB Layout
.450
(11.43) MAX
2 PLC
.453
(11.50)
2.041
(51.84)
.169 ± .003
(4.29 ± 0.08)
.085
(2.15)
2 PLC
ø.035 ± 002
(0.89 ± 0.05)
50 PLC
Filter
Spring Latch
2 PLC
Shown in this
view only
Top
2.949 ± .010
(74.90 ± 0.25)
3.264 ± .015
(82.90 ± 0.38)
Screw
#4-40 thread
2 PLC
2.511
(63.77)
100˚ TYP
.164
(4.17)
.465
(11.81)
25
1
50
26
.085 ± .010
(2.16 ± 0.25)
TYP
.025
(0.64)
TYP
.610 ± .015
(15.50 ± 0.25)
.305 ± .010
(7.75 ± 0.25)
TYP
CONTACT
50 PLC
Mating Face
Shell
Pin Organizer
.478 ± .010
(12.14 ± 0.25)
2 PLC
Bottom
.126
(ø3.20)
2 PLC
Boardlock
2 PLC
Filter
Position 1
.559
(14.21)
Dimensions in inches (mm)
Part Number
56-886-002
56-886-003
56-886-004
56-886-005
Capacitance Value
100 pF, ±20%
220 pF, ±20%
470 pF, ±20%
820 pF, ±20%
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC56
Filtered Miniature Ribbon Connectors
50 Position
Adapter
3.270
(83.06)
2.950
(74.93)
.453
(11.51)
2.040
(51.82)
.680
(17.27)
2.637
(66.98)
.300
(7.62)
.780
(19.81)
.595
(15.11)
1.400
(35.56)
Max.
Dimensions in inches (mm)
Part Number
56-889-002
56-889-003
56-889-004
56-889-005
Capacitance Value
100 pF ±15%
220 pF ±15%
470 pF ±15%
820 pF ±15%
Hardware options also available. Consult factory for more information.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC57
Filtered Modular
Jack Connectors
Impedance (ohm)
Typical Impedance vs. Frequency
(Ferrite Version)
20
10
0
■
■
■
■
■
■
100
Frequency (MHz)
1000
100
Frequency (MHz)
1000
Multi-Port
90
80
70
60
50
40
30
20
10
1
10
Typical Time Voltage Curves
(ESD Version)
ESD Transient Spike
Waveform
Voltage
■
RoHS compliant
Lower installed cost
Assists with FCC Part 15 A & B; and CISPR 22
compliance
Drop-in replacement, matched footprint
All circuit lines protected
Inductor, capacitor or ESD versions
Unshielded or shielded versions
Select lead versions available
High temperature versions available
for reflow processes
10
100
Features
■
1
110
0
■
8-Position
30
120
Impedance (ohm)
Protecting signals from electromagnetic interference
(EMI) is now more important than ever. API’s Spectrum
Control brand gives you more choices in keeping your
signals clean and free of EMI. Whatever the level of
protection your application requires, we offer signal
conditioning products that meet varied levels of price
and performance.
These compact, low-cost, filtered printed
circuit board RJ45 modular jack connectors from
API’s Spectrum Control brand offers an inexpensive
way to protect equipment from conducted and radiated
electromagnetic interference (EMI), while meeting all
appropriate performance requirements. Offering compact
size and high reliability, these new connectors are
fully intermateable and interchangeable with existing
standard products. The low profile and narrow width
of the multi-port style allows more ports to be packed
into less space.
Filtered versions can be supplied in shielded or
unshielded versions. Redundant shielding tabs ensure
that a low impedance ground path is maintained
across the interface. These flame retardant polyester
thermoplastic connectors are compatible with wave
solder environments, and utilize duplex plated
contacts with solder tails.
Modular jack connectors assist with FCC Part 15
A & B; and CISPR 22 compliance.
Applications for this type of connector are widely
diversified and include: LANs, WANs, network cards,
broadband transmission equipment, workstations,
peripherals, fax/modems, copy machines and
multiplexing.
System Voltage Limit
Clamping Voltage
Clamped Waveform
Time
Typical Time-Voltage Curve of Transient Spike on Integrated
Protected Connector with Capacitance (Parts with Working
Voltage Code starting with 0)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC58
Rugged
USB Connectors
New rugged USB Connectors from API’s Spectrum Control
brand feature a heavy-duty design able to connect to USB
2.0 or 1.1 ports, making them ideal for demanding, high
stress applications.
Product Highlights
■
Connectors meet seal requirements of IEC-60529,
Code IP67 on PCB side
■
Meet immersion requirements per MIL-STD-810F,
Method 512.4 to 20 meters (unmated)
■
RoHS compliant
■
Supplied with gasket
■
Ideal for demanding applications in the military,
communications, medical, industrial and
computing industries
■
Type A, right-angle mounted connector
■
USB 2.0 or 1.1 applications
■
Part Number: 56FU04-017
Electrical Specifications
Operating Temperature . . -40°C to +105°C
Current Rating. . . . . . . . 1.5 Amps
Contact Resistance . . . . . 30 mΩ
Dimensions
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC59
Hooded Strain Reliefs
Hooded strain reliefs are used whenever a connector
is used on a cable assembly which will be exposed
to users and subject to multiple disconnects. Hoods
are designed to protect users from shock hazard by
exposed solder joints, as well as provide a strain relief
for the wires and protection against accidental short
circuits.
Since most filter connectors are larger than
standard connectors, there had been a problem fitting
most commercially available hoods. Spectrum Control
solves this problem. Our hoods are molded of thin wall
plastic, providing extra internal space to accommodate
larger filter connectors. The hood is constructed of
extremely durable polycarbonate and meets the
flammability requirements for UL94V-0.
In addition, hoods are ideal for use on applications
which require the use of extra components such as
resistors or varistors on the wires. The nonconductive
hood conveniently houses the connector, components,
and protects any joints.
■ 2560-9000-XX is supplied with metal retention
clips to hold the connector within the hood
assembly. This item is recommended for use
with Spectrum Filtered D-subs, most other filtered
D-subs, and most standard D-subs.
■ 2560-9001-XX is meant to be used with a
connector which has a special eyelet on the
mounting flange. This feature is available as an
option on the Spectrum Filtered D-sub. Contact
factory for additional information.
#2560-9000-XX
#2560-9001-XX
Retention Clip
Version
“Eyelet”
(For use with “Eyelet”
connectors)
(For use with most
connectors)
Hood
Hood
Captive
Screw
Captive
Screw
Eyelet
Clip
Connector
Flange
Connector
Flange with
Optional
Eyelet
Ordering Information and Dimensions
Part
Number
2560-9000-01
2560-9001-01
2560-9000-02
2560-9001-02
Connector
Size
A
±.005
B
Max
C
Max
D
Max
E
Max
F
Max
9
0.984
(24.99)
1.228
(31.19)
1.710
(43.43)
0.985
(25.02)
.685
(17.40)
.240
(6.07)
E
D
F
15
1.312
(33.33)
1.556
(39.52)
1.710
(43.43)
1.310
(26.71)
.685
(17.40)
Cable Tie
(Not Supplied)
.300
(7.62)
C
2560-9000-03
2560-9001-03
25
1.852
(47.04)
2.103
(53.42)
1.710
(43.43)
1.850
(46.99)
.685
(17.40)
.400
(10.16)
2560-9000-04
2560-9001-04
37
2.500
(63.50)
2.744
(69.70)
1.710
(43.43)
2.500
(63.50)
.685
(17.40)
.400
(10.16)
A
B
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC60
Custom Engineered
Solutions
Despite the breadth of our filtered connector product
line, there exist certain applications which demand a
custom EMC solution. Our engineering staff will work
with your design team to provide a custom filtered
connector which meets your individual requirements.
Examples of custom projects are shown below.
Special Mounting
Flanges & Value-added
Special Mounting Flanges
■
Housings can be designed to be integrated into
the customer’s equipment. The housings are
constructed of machined materials, or precision
diecast zinc.
Value-added Assemblies
■
API’s capabilities extend beyond just
supplying filter connectors. Additional operations
such as sourcing and assembling flexible circuits,
adding flying leads, or making connector to
connector assemblies, all can be provided in
conjunction with the filter connector.
Custom Filter Arrangements
■
Custom Filter
Arrangements & Connectors
Complex filters involving unbalanced Pi types,
LC types with large inductive components, special
pin-in to pin-out translations, and overvoltage
protective devices such as diodes and varistors
can be packaged within the connector.
Other Connector Formats
■
Manufacturer specific connectors also can be
filtered. Our involvement ranges from complete
design to implementing minor modifications
to include the addition of the filter components.
Medical equipment and hand-held devices
are examples of excellent applications
for these connectors.
VDE RS232
connector
Tempest VGA
connector
adapter
FCC VGA
connector
adapter
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC61
Filtered Connector Performance Specifications
The filtered D-subminiature connectors shown in
this catalog have been designed and tested to the
following test plan.
Test
Group
I
II
Order
of
Test
Examination
of Test
The information shown can be used as a basis for
your filtered connector specifications. (Contact API
for additional details.)
Test Method
Post Test
Requirements
1
Visual and Mechanical
Examination
2
Materials, Designs
Construction and
Workmanship
3
Physical Dimensions
and Marking
4
Capacitance
MIL-STD-202
Method 305 1 KHz, 1VRMS max. 25°C
WIthin specified tolerance.
5
Dielectric Withstanding
Voltage
MIL-STD-202
Method 301
No breakdown or damage.
6
Insulation Resistance
MIL-STD-202
Method 302, test condition at rated voltage
5000 megohm minimum.
7
Insertion Loss
MIL-STD-220
No load
In accordance with applicable requirements.
1
Contact Engagement
and Separation
MIL-C-24308, Para. 3.5.10
Maximum engagement force 18.0 oz., minimum
separation force 0.7 oz.
2
Mating and Unmating Force
MIL-C-24308, Para. 3.5.4
MIL-C-24308, Para. 3.5.4
Table II
Limits: Shell size 1-5, class G only.
3
Durability
MIL-C-24308, Para. 3.5.16, 4.7.18, except 100
cycles
MIL-C-24308, Para. 3.5.9
Contact resistance at 1 amp. 20 millohms max.
4
Thermal Shock
MIL-STD-202
Method 107, Test condition B, -55°C to +125°C
No evidence of damage.
Insulation resistance not less than 2500 megohms.
5
Solderability
MIL-STD-202; Method 208, RMA-Flux
Terminals shall meet solderability requirements.
6
Moisture Resistance
MIL-STD-202
Method 106, less step seven
Insulation resistance not less than 500 megohms.
Meet dielectric withstanding voltage requirements.
7
Resistance to Soldering
Heat
MIL-STD-202
Method 210, Test condition D
Insulation resistance not less than 500 megohms.
Meet dielectric withstanding voltage requirements.
1
Vibration
MIL-STD-202
Method 204, Test condition D, 100 mA, current
No interruption of current flow longer than
1 microsecond. Insulation resistance greater
than 5000 megohms.
In accordance with applicable requirements.
No interruptions of current flow longer than
1 microsecond.
III
2
Shock
MIL-STD-202
Method 213.
Test Condition G,
100 mA, current
Contact resistance at 1 amp. 15 millohms max.
Capacitance within specified limits.
Insulation resistance greater than 2500 megohms.
IV
3
Mounting Inserts
a. Prevailing torque
(locking)
b. Installation torque
(locking)
c. Push-out Force
IFI-100
a. 3 inch-pounds max.
b. 6 inch-pounds without damage
c. 10 pounds axial force without loosening insert
1
Life
MIL-STD-202
Method 108, Test condition D, within 125%
of rated voltage at the maximum operating
temperature.
Filter shall meet all initial requirements except
insulation resistance shall not be less than 500
megohms.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC62
Board & Panel Cutouts
B
E
I
J
D
B
E
F
H
G
C
A
.590
(14.99)
.315
(8.00)
Printed Circuit
Vertical Board Mount (standard density)
I
G
J
D
F
C
A
Front of Flange
H
Printed Circuit
Right Angle Mount (standard density)
Board Layout (Pin and Socket Contact) for Standard D-Sub Connectors
Shell
Size
9 (0)
15 (1)
25 (2)
37 (3)
50 (4)
A
B
C
D
E
F
.984
(25.00)
.436 = 4 x .109
(11.07) (2.77)
.327 = 3 x .109
(8.31) (2.77)
.492
(12.50)
1.312
(33.32)
.763 = 7 x .109
(19.38) (2.77)
.654 = 6 x .109
(16.61) (2.77)
.656
(16.66)
1.852
(47.04)
1.308 = 12 x .109
(33.22) (2.77)
1.199 = 11 x .109
(30.45) (2.77)
.926
(23.52)
2.500
(63.50)
1.962 = 18 x .109
(49.83) (2.77)
1.853 = 17 x .109
(47.07) (2.77)
1.250
(31.75)
0.112
2 rows
2.406
(61.11)
1.744 = 16 x .109
(44.30) (2.77)
2 rows
1.635 = 15 x .109
(41.35) (2.77)
1 row
1.203
(30.56)
0.00
1 row
H
I
(Dia.)
J
.125
(3.18)
.045
(1.14)
.054
(1.37)
G
PCB
Mount
.056 (1.42)
.109
(2.77)
.112
(2.84)
PCB
Mount
Rt Angle
.275 (6.99)
Panel Cutouts (Front or Rear Mounting)
for Standard and High-Density D-Sub Connectors
Shell
Size
9 (0)
15 (1)
25 (2)
37 (3)
50 (4)
A
±.015
(.38)
B
±.015
(.38)
C
±.015
(.38)
D
±.015
(.38)
E
±.003
(.08)
F
±.005
(.13)
G
±.002
(.05)
.984
(24.99)
.492
(12.49)
.777
(19.74)
.388
(9.87)
.440
(11.18)
.220
(5.59)
.150
(3.81)
1.312
(33.32)
.656
(16.66)
1.105
(28.07)
.552
(14.03)
.440
(11.18)
.220
(5.59)
.150
(3.81)
1.852
(47.04)
.926
(23.52)
1.645
(41.78)
.822
(20.89)
.440
(11.18)
.220
(5.59)
.150
(3.81)
2.500
(63.50)
1.250
(31.75)
2.293
(58.24)
1.146
(29.12)
.440
(11.18)
.220
(5.59)
.150
(3.81)
2.406
(61.11)
1.203
(30.55)
2.190
(55.63)
1.095
(27.81)
.550
(13.97)
.275
(6.98)
.150
(3.81)
.125 Dia.
(3.18 Dia.)
2 holes
10°
C
D
E
G
B
F
A
Front
Mounting
Panel
Rear
Mounting
Panel
Panel Cutouts
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC63
Board & Panel Cutouts
15 High-Density
Pin/PCB
15 High-Density
Socket/Right Angle
.040 (1.02) Ø
15 holes
.040 (1.02) Ø
15 holes
1
.040 (1.02) Ø
15 holes
.045
(1.14)
Connector
26 High-Density
Pin/PCB
C
L
.090 (2.29)
Typ.
.045
(1.14)
.090 (2.29)
Typ.
Connector
.045
(1.14)
Connector
CL
CL
.010
(.25)
1
.100 (2.54)
Typ.
Front Face
of Connector
Flange
.010
(.25)
1
.078 (1.98)
Typ.
.090
(2.29)
Typ.
.020
(.51)
.078 (1.98)
Typ.
26 High-Density
Socket/PCB
44 High-Density
Pin/PCB
.040 (1.02) Ø
44 holes
.040 (1.02) Ø
15 holes
.045
(1.14)
Connector
C
L
.125 (3.18) Ø
2 holes
.450
(11.43)
44 High-Density
Socket/PCB
1
.090
(2.29)
Typ.
.040 (1.02) Ø
44 holes
.045
(1.14)
Connector
.045
(1.14)
C
L
C
L
Connector
.020
(.51)
.020
(.51)
.020
(.51)
.090
(2.29)
Typ.
.090
(2.29)
Typ.
1
.078 (1.98)
Typ.
62 High-Density
Pin/PCB
1
62 High-Density
Socket/PCB
.040 (1.02) Ø
62 holes
1
.078 (1.98)
Typ.
.078 (1.98)
Typ.
78 High-Density
Socket/PCB .040 (1.02) Ø
Pin/PCB
78 holes
.040 (1.02) Ø
62 holes
.095
(2.41)
Typ.
.0475
(1.21)
Connector
C
L
Connector
.023
(.58)
.095
(2.41)
Typ.
1 (Pin/PCB)
C
L
Connector
.023
(.58)
C
L
.095
(2.41)
Typ.
.0475
(1.21)
1
.078 (1.98)
Typ.
.078 (1.98)
Typ.
.041 (1.04)
1 (Socket/
PCB)
.082 (2.08)
Typ.
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC64