WMGPSU60 SERIES Up to 60 Watts AC DC Wall Mount Power Supplies Single Output Rev A U Type: US Plug E Type: EU Plug SA Type: 2-Pin AUS Type BS Type: UK Plug CH Type: China Plug Size: 3.68in x 1.38in x 2.03in Size: 3.68in x 1.38in x 2.02in Size: 3.68in x 1.38in x 2.36in Size: 3.68in x 1.38in x 2.03in OPTIONS FEATURES • Plug type • Output Connectors • Output Voltage • Universal Input Voltage Range of 100~240VAC • Meets EISA 2007/DoE (VI) & EU ErP/ CoC (5) For 9~58VDC • Single Outputs • Optional Output Connectors Available Size: 3.68in x 1.38in x 2.03in • Short Circuit, Over Voltage, and Over Current Protection • 5 Plug Types Available: US Plug, EU Plug, 2-Pin Aus Plug, UK Plug, and China Plug • UL60950-1, CSA C22.2, EN60950-1, IEC60950-1, and J60950 Safety Approvals • High Efficiency DESCRIPTION The WMGPSU60 series of AC DC wall mount power supplies provides up to 60 watts of output power in a compact package. This series consists of single output models with output voltages ranging from 5V~48V and universal input voltage of 100-240VAC. There are five different plugs available for this series: US plug, EU plug, 2-pin AUS plug, UK plug, and China plug. Optional output connectors are also available. Each model in this series has short circuit, over voltage, and over current protection and has UL60950-1, CSA C22.2, EN60950-1, IEC60950-1, and J60950 safety approvals. Please call factory for order details. MODEL SELECTION TABLE Model Number(1) WMPGSU60x-1 WMGPSU60x-1-1 WMGPSU60x-2 WMGPSU60x-3 WMGPSU60x-4 WMGPSU60x-5 WMGPSU60x-6 WMGPSU60x-7 WMGPSU60x-8 12/18/2015 Input Voltage Output Voltage Measured Output Current Ripple & Noise Output Power Range Range at Output 100~240VAC 5~6VDC 6~8VDC 8~11VDC 11~13VDC 13~16VDC 16~21VDC 21~27VDC 27~33VDC 33~58VDC 5VDC 7.5VDC 9VDC 12VDC 15VDC 19VDC 24VDC 30VDC 48VDC 6.00~5.00A 6.00~5.63A 6.00~5.00A 5.45~4.62A 4.62~3.75A 3.75~2.86A 2.86~2.23A 2.23~1.82A 1.82~1.04 100mV 100mV 100mV 100mV 150mV 150mV 150mV 250mV 250mV 30W 45.04W 55W 60.06W 60.06W 60.06W 60.21W 60.21W 60.32W No Load Power Consumption <0.075 <0.075 <0.15 <0.15 <0.15 <0.15 <0.15 <0.15 <0.15 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Efficiency(2) DoE (VI) 85.07% 87.76% 88% 88% 88% 88% 88% 88% 88% CoC (5) 89% 89% 89% 89% 89% 89% 89% Page 1 of 5 Rev A WMGPSU60 SERIES Up to 60 Watts AC DC Wall Mount Power Supplies Single Output SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current Leakage Current Inrush Current OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Output Power Output Current Ripple & Noise Transient Response Set-Up Time Hold Up Time Rise Time Temperature Coefficient PROTECTION Short Circuit Protection Over Current Protection Over Voltage Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Relative Humidity Derating MTBF GENERAL SPECIFICATIONS Efficiency Insulation Resistance Withstand Voltage PHYSICAL SPECIFICATIONS Weight Typ 100 50 @240VAC/50Hz @230VAC at 25ºC, cold start Max Unit 240 60 1.5 0.25 VAC Hz A mA A 100 See Table ±1 For any input voltage change between input voltage range Variations from minimum to maximum output current % % ±5 See Table See Table See Table Maximum excursion of 4% or better on all models. Recovering to 1% of final value within 500µS after a 25% step load change @Full Load @Full Load @Full Load All outputs Hiccup Mode Hiccup Mode Rated Output Current Protected by Zener Diode Rated Output Voltage 1000 10 50 mS mS mS %/ºC ±0.04 Automatic Recovery Automatic Recovery 110 See derating curve Non-Condensing Derate from 100% at +40ºC linearly to 70% at 50ºC @Full Load @25ºC ambient temperature % 110 140 % 0 -40 5 +40 +85 95 ºC ºC % 100,000 hours See Table From Input to Output From Input to Output 50 MΩ VDC 4242 7.05~8.82oz (200~250g) 3.68in x 1.38in x 2.03in (93.5mm x 35mm x 51.5mm) 3.68in x 1.38in x 2.02in (93.5mm x 35mm x 51.4mm) 3.68in x 1.38in x 2.36in (93.5mm x 35mm x 60mm) U Type, BS Type, and CH Type Dimensions (L x W x H) Min E Type SA Type SAFETY & EMC CHARACTERISTICS Safety Approvals EMC UL60950-1, CSA C22.2 EN60950-1 IEC60950-1 J60950 CE: Emission: EN55022; EN61000-3-2,3 Immunity: IEC61000-4-2,3,4,5,6,11 FCC 47 CFR Part 15 Subpart B NOTES (1) (2) (3) (4) “x” in model number indicates plug type. “x” can be: “U”= U Type= US Plug, “E”=E Type= EU Plug, “SA”= SA Type= 2-Pin AUS Plug, “BS”= BS Type= UK Plug, or “CH”= CH Type= China Plug. Average Efficiency @230VAC, 25, 50, 75, and 100% load. Optional output connectors available. Please call factory for details. Standard Output Cables: 5~11V: UL1571, 14AWG, 1M 11~13V: UL1571, 16AWG, 1M 13~21V: UL1185, 16AWG, 1M 21~48V: UL1185, 18AWG, 5FT *WMGPSU60x-7 Output cable with ferrite core. 12/18/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 5 Rev A WMGPSU60 SERIES Up to 60 Watts AC DC Wall Mount Power Supplies Single Output DERATING CURVES Derating Curve Typical Static Characteristics MECHANICAL DRAWINGS U Type- American Plug 12/18/2015 E Type- European Plug Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 5 Rev A SA Type- 2 Pin AUS Plug WMGPSU60 SERIES Up to 60 Watts AC DC Wall Mount Power Supplies Single Output BS Type- UK Plug CH Type- China Plug 12/18/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 5 Rev A WMGPSU60 SERIES Up to 60 Watts AC DC Wall Mount Power Supplies Single Output COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 12/18/2015 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 5