Download Data Sheet

WMIPEA1024 SERIES
16~36 Watts
AC/DC Interchangeable Wall Mount
Single Output
Rev A
South Africa
USA/China
EU
UK
SAA
Size: 2.90in x 1.69in x 1.28 in
OPTIONS
FEATURES
• AC Plug
• Output Voltage
• Output Power
• RoHS Compliant
• Output Voltage up to 48V
• Energy Level V and VI compliant
• Over Voltage and Short Circuit Protection
• Interchangeable AC Plugs Available for USA, • UL/cUL UL60950, TUV/SUD EN/IEC 60950, CB, CE,
China, EU, UK, SAA, and South Africa
FCC, and CCC Safety Approvals
DESCRIPTION
The WMIPEA1024 series of AC DC interchangeable wall mount power supplies provides up to 36 Watts of continuous output power in a
2.9” x 1.69” x 1.28” package. All models have a single output and a wide input voltage range of 100~240VAC. This series is RoHS
compliant and meets CEC Level V, VI requirements. This series also has UL/cUL 60950, TUV/SUD EN/IEC 60950, CB, CCC, FCC, and
CE safety approvals. All models are protected against short circuit and over voltage conditions. Six interchangeable AC plugs are
available for this series: USA, China, EU, UK, SAA, and South Africa. Please call factory for ordering details.
MODEL SELECTION TABLE
Output Current
Min Load
Max Load
0A
2A
0A
3A
0A
4A
0A
1.5A
0A
2A
0A
3A
0A
1.66A
0A
2.5A
0A
1.33A
0A
1.66A
0A
0.55A
0A
0.83A
0A
3A
0A
2A
0A
1.5A
Input Voltage
Range
Output Voltage
WMIPEA1024Ax
WMIPEA1024Bx
WMIPEA1024Cx
WMIPEA1024Dx
WMIPEA1024Ex
WMIPEA1024Fx
WMIPEA1024Gx
WMIPEA1024Hx
WMIPEA1024Jx
WMIPEA1024Kx
WMIPEA1024Mx
WMIPEA1024Nx
WMIPEA1024Px
WMIPEA1024Qx
WMIPEA1024Rx
100-240VAC
50-60Hz
5~8V
5~8V
5~8V
9~11V
9~11V
9~11V
12~17V
12~17V
18~24V
18~24V
36~48V
36~48V
12V
12V
24V
5/16/2016
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
Model Number(1)
Ripple & Noise(2)
Output Power(3)
Efficiency
100mV
100mV
100mV
250mV
250mV
250mV
250mV
250mV
350mV
350mV
480mV
480mV
250mV
250mV
350mV
16W
20W
24W
18W
24W
27W
20W
30W
24W
30W
20W
30W
36W
24W
36W
Level V, VI
Level V, VI
Level V, VI
Level V, VI
Level V, VI
Level V, VI
Level V, VI
Level V, VI
Level V, VI
Level V, VI
Level V, VI
Level V, VI
Level V, VI
Level V, VI
Level V, VI
Page 1 of 3
WMIPEA1024 SERIES
16~36 Watts
AC/DC Interchangeable Wall Mount
Single Output
Rev A
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
Input Current
Inrush Current
At cold start
OUTPUT SPECIFICATIONS
Output Voltage
Line Regulation(4)
Load Regulation
Output Power
Output Current
Ripple & Noise (20MHz bandwidth)
Hold-Up Time
Start-Up Time
PROTECTION
Short Circuit Protection
Over Voltage Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
GENERAL SPECIFICATIONS
Efficiency
PHYSICAL SPECIFICATIONS
Weight
Typ
100
50
-1
-5
Max
Unit
240
60
1
60
VAC
Hz
A
A
See Table
+1
+5
See Table
See Table
See Table
%
%
8.3
mS
S
3
Automatic Recovery
Automatic Recovery
0
-20
10
5
40
85
90
95
ºC
ºC
%
%
Meets CEC Level V, VI
7.05oz (200g)
2.90in x 1.69in x 1.28 in
(73.6mm x 42.8mm x 32.5 mm)
Dimensions (L x W x H)
U: USA
C: China
E: Eu
K: UK
A: SAA
S: South Africa
AC Plug
SAFETY
UL/cUL UL60950
TUV/SUD EN/IEC 60950
CB
CE
FCC
CCC
Safety Approvals
NOTES
(1)
(2)
(3)
(4)
5/16/2016
“x” in model number represents interchangeable AC plug type. “x” can be “U” for USA plug, “C” for China plug, “E” for EU plug, “K” for UK plug, “A”
for SAA plug, or “S” for South Africa plug.
Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.1uF ceramic capacitor & parallel
with 47uF aluminum capacitor at full load and nominal line.
Max. Power (W)=Vo x Io
Line regulation is defined by changing ±10% of input voltage from nominal line at rated load.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
Page 2 of 3
Rev A
WMIPEA1024 SERIES
16~36 Watts
AC/DC Interchangeable Wall Mount
Single Output
MECHANICAL DRAWINGS
Mechanical Specification
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
5/16/2016
(603)778-2300
(888)597-9255
(603)778-9797
sales@wallindustries.com
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
Page 3 of 3