ROHM MP6T12

Midium Power Transistors (-50V / -1A)
MP6T12
 Structure
PNP Silicon epitaxial planar transistor
 Dimensions (Unit : mm)
MPT6
 Features
1) Low saturation voltage, typically
V CE (sat) = -0.4V (Max.) (I C / I B= -500mA / -25mA)
(6)
(5)
(4)
(1)
(2)
(3)
2) High speed switching
 Applications
Low Frequency Amplifier
High Speed Switching
 Inner circuit (Unit : mm)
 Packaging specifications
Type
(6)
(5)
(4)
(1)
(2)
(3)
Package
MPT6
Code
TR
Basic ordering unit (pieces) 1000
(1) Tr.1
(2) Tr.1
(3) Tr.2
(4) Tr.2
(5) Tr.2
(6) Tr.1
Emitter
Base
Collector
Emitter
Base
Collector
 Absolute maximum ratings (Ta = 25C)
<It is the same ratings for the Tr.1 and Tr.2>
Parameter
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
Collector current
DC
Pulsed
Power dissipation
Junction temperature
Range of storage temperature
Symbol
Limits
Unit
VCBO
VCEO
VEBO
-50
-50
V
V
-6
IC
-1
-2
2.0
V
A
A
W/Total
1.4
150
-55 to +150
W/Element
C
C
ICP
PD
PD
Tj
Tstg
*1
*2
*2
*1 Pw=10ms, Single Pulse
*2 Mounted on a 40 x 40 x 0.7[mm3] ceramic board
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
1/5
2010.07 - Rev.A
MP6T12
Data Sheet
 Electrical characteristics (Ta = 25C)
<It is the same characteristics for the Tr.1 and Tr.2>
Parameter
Symbol
Min.
Typ.
Max.
Unit
Collector-emitter breakdown voltage
BVCEO
-50
-
-
V
IC= -1mA
Collector-base breakdown voltage
BVCBO
-50
-
-
V
IC= -100μA
Emitter-base breakdown voltage
Conditions
BVEBO
-6
-
-
V
IE= -100μA
Collector cut-off current
ICBO
-
-
-1
A
VCB= -50V
Emitter cut-off current
IEBO
A
VEB= -4V
-
-
-1
*1
VCE(sat)
-
-200
-400
hFE
180
-
450
-
VCE= -2V, I C= -50mA
-
400
-
MHz
VCE= -10V
IE=200mA, f=100MHz
Cob
-
12
-
pF
Turn-on time
ton *2
-
40
-
ns
Storage time
tstg *2
-
250
-
ns
t f *2
-
35
-
ns
Collector-emitter staturation voltage
DC current gain
Transition frequency
Collector output capacitance
Fall time
fT
*1
mV IC= -500mA, I B= -25mA
VCB= -10V, I E=0A
f=1MHz
IC= -0.5A, I B1= -50mA,
_ -10V
IB2=50mA, VCC ~
*1 Pulsed
*2 See switching time test circuit
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
2/5
2010.07 - Rev.A
MP6T12
Data Sheet
 Electrical characteristics curves (Ta=25℃)
Fig.1 Typical Output Characteristics
Fig.2 DC Current Gain vs. Collector Current ( I )
-0.5
1000
-4.0mA
-2.5mA
Ta=25°C
DC CURRENT GAIN : hFE
-5.0mA
-0.4
COLLECTOR CURRENT : IC[A]
-3.0mA
-2.0mA
-0.3
-1.5mA
-0.2
-1.0mA
VCE= -5V
-2V
100
-0.1
-0.5mA
0.0
10
0
-0.5
-1
-1.5
-2
-1
-10
COLECTOR TO EMITTER VOLTAGE : VCE[V]
1000
COLLECTOR
OR SATURATION VOLTAGE : VCE(sat)[V]
DC
C CURRENT GAIN : hFE
-10000
-1
VCE= -2V
Ta=125°C
75°C
25°C
-40°C
Ta=25°C
-0.1
IC/IB=50
20
10
-0.01
-0.001
10
-1
-10
-100
-1000
-1
-10000
-10
-100
-1000
-10000
COLLECTOR CURRENT : IC[mA]
COLLECTOR CURRENT : IC[mA]
Fig.5 Collector-Emitter Saturation Voltage vs.
Collector Current ( II )
Fig.6 Ground Emitter Propagation Characteristics
-1
-10000
IC/IB=20
VCE= -2V
COLLECTOR CURRENT : IC[mA]
COLLECTOR SATURATION VOLTAGE : VCE(sat)[V]
-1000
Fig.4 Collector-Emitter Saturation Voltage vs. Collector
Current ( I )
Fig.3 DC Current Gain vs. Collector Current ( II )
100
-100
COLLECTOR CURRENT : IC[mA]
-0.1
Ta=125°C
75°C
-0.01
25°C
-40°C
-1000
Ta=125°C
75°C
-100
25°C
-40°C
-10
-1
-0.001
-1
-10
-100
-1000
0.1
-10000
COLLECTOR CURRENT : IC[mA]
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
-0.4
-0.9
-1.4
BASE TO EMITTER VOLTAGE : VBE[V]
3/5
2010.07 - Rev.A
MP6T12
Data Sheet
Fig.7 Emitter Input Capacitance vs. Emitter-Base Voltage
Collector Output Capacitance vs.Collector-Base Voltage
Fig.8 Gain Bandwidth Product vs. Emitter Current
1000
Ta=25°C
f=1MHz
IE=0A
TRANSITION FREQUENCY : fT[MHz]
COLLECTOR OUTPUT CAPACITANCE : Cob(pF)
EMITTER INPUT CAPACITANCE : Cib(pF)
1000
100
Cib
10
Cob
Ta=25°C
VCE= -10V
100
10
1
-0.1
-1
-10
10
-100
COLLECTOR - BASE VOLTAGE : VCB [V]
EMITTER - BASE VOLTAGE : VEB [V]
100
1000
EMITTER CURRENT : IE[mA]
Fig.9 Safe Operating Area
-10
1ms
COLLECTOR CURRENT : IC [A]
10ms
-1
100ms
-0.1
DC
(Mounted on ceramic board)
-0.01
Ta=25℃
When one circuit is operated
Single non repetitive pulse
-0.001
-0.1
-1
-10
-100
COLLECTOR TO EMITTER VOLTAGE : VCE[V]
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
4/5
2010.07 - Rev.A
MP6T12
Data Sheet
 Switching time test circuit
RL=20Ω
VIN
IB1
IC
Pw
VCC ~_ -10V
IB2
Pw _
~ 50μs
DUTY CYCLE≦1%
IB2
BASE CURENT WAVEFORM
IB1
ton
tstg
tf
90%
COLLECTOR CURRENT WAVEFORM
IC
10%
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
4/5
2010.07 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A