RoHS Power Chip Shielded Inductors PCSLR2D18 Dimensions: *Allied Part Number Inductance (µh) Tolerance (%) Inches (mm) Test Freq. KHz,1v DCR (Ω) Max Rated Current (A) Irms (A) Max. Marking PCSLR2D18-2R2_-RC 2.2 30 100 0.041 0.85 2.30 CC PCSLR2D18-3R3_-RC 3.3 30 100 0.054 0.75 2.10 DD PCSLR2D18-4R7_-RC 4.7 30 100 0.078 0.63 1.65 EH PCSLR2D18-6R8_-RC 6.8 30 100 0.106 0.52 1.32 GI PCSLR2D18-100_-RC 10 30 100 0.180 0.43 1.00 KA PCSLR2D18-150_-RC 15 30 100 0.220 0.35 0.80 MA Features • Shielded SMD Power Inductor • Low DC Resistance • Ideal for use in DC-DC converter applications Electrical Inductance Range: 2.2µH to 47µH Tolerance: Available in 20% and 30% Operating Temp: -30ºC ~ +100ºC IDC: Current at which inductance drops by 10% of intial value Itemp current: Value obtained when current flows and the temperature has risen to 40ºC Resistance to Soldering Heat PCSLR2D18-220_-RC 22 30 100 0.320 0.30 0.68 LA PCSLR2D18-330_-RC 33 30 100 0.460 0.24 0.56 NA PCSLR2D18-390_-RC 39 30 100 0.600 0.22 Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC for 10 sec. ± 1 sec. Test Equipment PA (L): PM3260A / HP4284A / HP4285A PCSLR2D18-470_-RC 47 *For 20% insert “M”, for 30% insert “T” 30 100 0.660 0.20 0.48 OA All specifications subject to change without notice. (RDC): Chen Hwa 502BC (IDC): HP4284 + HP42841A / Chen Hwa 1061 + 301A Physical Packaging: 1000 pieces per 7 inch reel. Marking: As Shown 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED15 09/03/2014 www.alliedcomponents.com