RoHS SMD High Current Shielded Choke PCHC63Y35 Dimensions: .287 Max (7.3 Max) Inches (mm) .063+/-0.12 (1.6+/-0.3) .260+/-.008 (6.6+/-0.2) .118+/-.012 (3.0+/-0.3) .118 Max (3.0 Max) Allied Part Number Inductance (µh) Tolerance (%) DCR (mΩ) Max. Irms (Amp) Isat (Amp) PCHC63Y35-R47M-RC 0.47 20 4.2 17.5 26 PCHC63Y35-R68M-RC 0.68 20 5.5 15.5 25 PCHC63Y35-R82M-RC 0.82 20 8.0 13 24 PCHC63Y35-1R0M-RC 1.00 20 10 11 22 PCHC63Y35-1R5M-RC 1.50 20 15 9 18 PCHC63Y35-2R2M-RC 2.20 20 20 8 14 PCHC63Y35-3R3M-RC 3.30 20 30 6 13.5 PCHC63Y35-4R7M-RC 4.70 20 40 5.5 10 PCHC63Y35-6R8M-RC 6.80 20 60 4.5 8 PCHC63Y35-8R2M-RC 8.20 20 68 4 7.5 PCHC63Y35-100M-RC 10.0 20 85 3 7 Features • • • • • Magnetically shielded construction Saturation current up to 26Amps @.47µh Low DC Resistance Suitable for pick and place Similar to Vishay IHLP-2525CZ series Electrical Inductance Range: .47µH to 10µH Tolerance: 20% over entire range Test Frequency: 100KHz, 0.25V @ 25ºC Operating Temp: -40ºC ~ +125ºC Irms: Current at which the temp will rise no more than 40ºC @ 25ºC Ambient without core loss. Isat:: Current at which the initial Inductance will drop approximately 30% @ 25ºC. All specifications subject to change without notice. Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC Immersion Time: 10 sec. ± 1 sec. Physical Packaging: 1500 pieces per reel. Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 10/27/11 15 www.alliedcomponents.com