DATASHEET Rev. A DTEA1030 SERIES 100~240VAC Input Voltage Range IEC-320-C14, C8, and C6 AC Inlet Connector Types 20~36 Watts, Single Outputs AC/DC Desktop Power Supplies IEC-320-C14 IEC-320-C8 IEC-320-C6 FEATURES Single Outputs 100~240VAC Input Voltage Range CEC/Energy Star Level V Compliant IEC-320-C14, C8, and C6 AC Inlet Connectors Available RoHS & WEEE Compliant EMI/EMC: FCC Part 15 Class B and EN55022 Class B Short Circuit and Over Voltage Protection UL/cUL UL60065, UL60950, FCC, CE, CB, DolR+C-Tick, MTBF: > 30,000 Hours BSMI, Semko, CCC, and PSE Safety Approvals Dimensions: 3.86” x 1.77” x 1.22” Optional Output Connectors Available DESCRIPTION The DTEA1030 series of AC/DC desktop power supplies provides up to 36 Watts of continuous output power in a 3.86” x 1.77” x 1.22” package. This series consists of single output models with a wide input voltage range of 100~240VAC. The DTEA1030 series is RoHS, WEEE, and CEC/Energy Star Level V compliant and has short circuit and over voltage protection. This series also meets FCC Part 15 Class B and EN55022 Class B EMI/EMC limits and has UL/cUL UL60065, UL60950, FCC, CE, CB, DolR+C-Tick, BSMI, Semko, CCC, PSE, and EK (9~12V models) safety approvals. This series has three AC inlet connector types available: IEC-320-C14, IEC320-C8, and IEC-320-C6. Please call factory for ordering details. 09/04/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 4 DTEA1030 Series 20~36 Watts, Single Outputs C14, C8, & C6 AC Inlet Types AC/DC Desktop Power Supplies Rev. A SPECIFICATIONS: DTEA1030 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current Inrush Current OUTPUT SPECIFICATIONS Output Voltage (See Note 2) Line Regulation TEST CONDITIONS Min Typ Max Unit 100 240 VAC 50 60 Hz 1.0 A 60 A See Table defined by changing ±10% of input voltage from nominal line and rated load. Load Regulation -1 +1 % -5 +5 % Output Current See Table Minimum Load 0 A Output Power See Table Ripple & Noise See Table Hold-up Time 8.3 ms Turn-on Time 3 s PROTECTION Over Voltage Protection Automatic recovery Short Circuit Protection Automatic recovery GENERAL SPECIFICATIONS Efficiency (typical) 80 % ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Storage Humidity MTBF 0 40 °C -20 85 °C 5 95 % 30,000 hours PHYSICAL SPECIFICATIONS 3.86 x 1.77 x 1.22 inches (98 x 45 x 31 mm) IEC-320-C14, C8, and C6 Dimensions (L x W x H) AC Inlet Connector (See Note 1) Weight 7.76oz (220g) SAFETY Safety Standards EMI/EMC Compliance 09/04/2012 UL/CUL UL60065, UL60950, TUV/GS, EN/IEC 60065, EN/IEC 60950, FCC, CE, CB, DolR+C-Tick, BSMI, Semko, CCC, PSE, EK (9-12V Models) FCC Part 15 Class B and EN55022 Class B RoHS, WEEE, CEC/Energy Star Level IV Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 4 DTEA1030 Series 20~36 Watts, Single Outputs C14, C8, & C6 AC Inlet Types AC/DC Desktop Power Supplies Rev. A MODEL SELECTION TABLE Model Number (1) Input Voltage Range Output Voltage (2) Output Current Min Max Ripple & Noise (3) Output Power DTEA1020A1 5 ~ 8 VDC 0A 4A 100mVp-p 20W DTEA10201 9 ~ 12 VDC 0A 2A 250mVp-p 20W DTEA1020C1 13 ~ 20 VDC 0A 1.54A 250mVp-p 20W DTEA1020D1 21 ~ 35 VDC 0A 0.95A 350mVp-p 20W DTEA1030A1 5 ~ 8 VDC 0A 3.5A 100mVp-p 25W 9 ~ 12 VDC 0A 3A 250mVp-p 30W DTEA1030C1 13 ~ 20 VDC 0A 2.3A 250mVp-p 30W DTEA1030D1 21 ~ 35 VDC 0A 1.42A 350mVp-p 30W 12 VDC 0A 3A 250mVp-p 36W DTEA1036D1 21 ~ 35 VDC 0A 1.5A 350mVp-p 36W DTEA1020A2 5 ~ 8 VDC 0A 4A 100mVp-p 20W DTEA10202 9 ~ 12 VDC 0A 2A 250mVp-p 20W DTEA1020C2 13 ~ 20 VDC 0A 1.54A 250mVp-p 20W DTEA1020D2 21 ~ 35 VDC 0A 0.95A 350mVp-p 20W 5 ~ 8 VDC 0A 3.5A 100mVp-p 25W 9 ~ 12 VDC 0A 3A 250mVp-p 30W DTEA1030C2 13 ~ 20 VDC 0A 2.3A 250mVp-p 30W DTEA1030D2 21 ~ 35 VDC 0A 1.42A 350mVp-p 30W DTEA10301 100 ~ 240 VAC DTEA10361 DTEA1030A2 DTEA10302 100 ~ 240 VAC DTEA10362 12 VDC 0A 3A 250mVp-p 36W DTEA1036D2 21 ~ 35 VDC 0A 1.5A 350mVp-p 36W DTEA1020A3 5 ~ 8 VDC 0A 4A 100mVp-p 20W DTEA10203 9 ~ 12 VDC 0A 2A 250mVp-p 20W DTEA1020C3 13 ~ 20 VDC 0A 1.54A 250mVp-p 20W DTEA1020D3 21 ~ 35 VDC 0A 0.95A 350mVp-p 20W 5 ~ 8 VDC 0A 3.5A 100mVp-p 25W 9 ~ 12 VDC 0A 3A 250mVp-p 30W DTEA1030C3 13 ~ 20 VDC 0A 2.3A 250mVp-p 30W DTEA1030D3 21 ~ 35 VDC 0A 1.42A 350mVp-p 30W 12 VDC 0A 3A 250mVp-p 36W 21 ~ 35 VDC 0A 1.5A 350mVp-p 36W DTEA1030A3 DTEA10303 DTEA10363 DTEA1036D3 100 ~ 240 VAC AC Inlet Type IEC-320-C14 IEC-320-C8 IEC-320-C6 NOTES 1. The red suffix represents the type of AC inlet connector: “1” for IEC-320-C14 type, “2” for IEC-320-C8 type, and “3” for IEC-320-C6 type. 2. The output voltage is specified as a range (Ex: 9~12VDC); the customer must specify what they would like the voltage set at. 3. Ripple and Noise is measured at nominal line and full load with 20MHz limited bandwidth and a 0.1µF ceramic and 47µF aluminum capacitors in parallel on the output. 4. Optional output connectors are available. Please call factory for ordering details. 09/04/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 4 DTEA1030 Series 20~36 Watts, Single Outputs C14, C8, & C6 AC Inlet Types AC/DC Desktop Power Supplies Rev. A MECHANICAL DRAWING Unit: inches (mm) 3.86±0.04 (98±1) 1.77±0.04 (45±1) 1.22±0.04 (31±1) IEC-320-C14 1.22±0.04 (31±1) IEC-320-C8 1.22±0.04 (31±1) 1.22±0.04 (31±1) IEC-320-C6 COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 09/04/2012 (603)778-2300 (888)587-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 4