DATASHEET Rev. B DTIPU25 SERIES 90~264VAC Input Voltage Range Up to 25 Watts, Single Outputs Class I for A & C Types; Class II for B Type -20°C to +70°C Operating Temperature Range AC/DC Desktop Power Supplies IEC-320-C14 (Type A) IEC-320-C8 (Type B) IEC-320-C6 (Type C) FEATURES Class I for A & C Types; Class II for B Type Efficiency up to 86% 100% Burn-in Tested -20°C to +70°C Operating Temperature Range RoHS Compliant IEC-320-C14, IEC-320-C8, and IEC-320-C6 AC Inlets UL 94V-1 Compliant Available Energy Star 2.0, Efficiency Level V Compliant Single Output Voltages Available from 5~ 48VDC Wide Input Voltage Range: 90~264VAC Meets FCC Part-15 Class B and CISPR-22 Class B Emission Limits UL/cUL (UL60950-1: 2nd Edition) and TUV/GS (EN 60950-1: 2nd Edition) Safety Approvals Over Current Protection Approved as Limited Power Source (LPS) Optional Output Connectors Available DESCRIPTION The DTIPU25 series of AC/DC desktop power supplies provides up to 25 Watts of continuous output power. This series consists of single output models with a 90~264VAC input voltage range. All units are UL 94V-1, RoHS, CEC and Energy Star compliant and meet FCC Part-15 class B and CISPR-22 class B emission limits. The DTIPU25 series also meets new CE requirements and has UL/cUL (UL 60950-1: 2nd edition) and TUV/GS (EN 60950-1: 2nd edition) safety approvals. The DTIPU25 series has three types of AC inlets available: IEC-320-C14 (Type A), IEC-320-C8 (Type B), and IEC-320-C6 (Type C). All units have been 100% burn-in tested. 06/27/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 5 DTIPU25 Series Up to 25 Watts Class I & II, Single Outputs AC/DC Desktop Power Supplies Rev. B SPECIFICATIONS: DTIPU25 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT SPECIFICATIONS Operating Input Voltage Range Safety Approvals Input Voltage Range Operating Voltage Range Input Frequency Input Current Inrush Current Low Line High Line Low Line High Line Io = Full Load, Vin = 115VAC Io = Full Load, Vin = 230VAC Io = Full Load, 25°C, Cool Start, Vin = 115VAC Io = Full Load, 25°C, Cool Start, Vin = 230VAC DTIPU25-102~104 Models No Load, Vin = 230VAC DTIPU25-105~111 Models No Load Power Consumption OUTPUT SPECIFICATIONS Output Voltage Load Regulation Line Regulation Output Power Output Current Range Ripple & Noise (peak to peak) Transient Response Time Hold-Up Time Start-Up Time Temperature Coefficient PROTECTION Over Voltage Protection Over Current Protection GENERAL SPECIFICATIONS Efficiency Vin = 230VAC Io = Full Load Vin = 90 to 264VAC 0 Hz A A W % % W % ms ms s %/°C Nil Io = Full Load, Vin = 230VAC Primary to Secondary Primary to Ground Test Voltage = 500VDC Io = Full Load, Vin = 240VAC 150 % See Table A, B, and C types A and C types A, B, and C types Derating linearly from 100% Load at 40°C to 50% load at 70°C Operating Temp. at 25°C; calculated per MIL-HDBK-217F A, B, and C types A type B and C types 06/27/2012 VAC See Table 3 5 0.5 1 25 See Table 0.5 1 4 14 16 0.25 0.5 +0.04 110 Dimensions (L x W x H) CEC & Energy Star Compliance 12 -0.04 Isolation Resistance Safety Ground Leakage Current ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Storage Humidity MTBF PHYSICAL SPECIFICATIONS Weight SAFETY Safety Approvals EMI Requirements for CISPR-22 EMI Requirements for FCC PART-15 Compliance 264 240 63 0.55 0.3 25 50 0.5 0.3 20 43 1 Full Load, Vin = 90VAC Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 110VAC Io = Full Load, Vin = 100VAC Dielectric Withstand Voltage AC Inlets 90 100 47 A Type B Type C Type 4242 2121 50 VDC 0.5 -20 -40 0 0 MΩ mA 0.75 40 70 85 95 95 300,000 hours °C °C % % Approx. 6oz (170g) 4.11 x 1.65 x 1.22 inches (104.4 x 42.0 x 31.0 mm) 3.90 x 1.65 x 1.22 inches (99.0 x 42.0 x 31.0 mm) IEC-320-C14 IEC-320-C8 IEC-320-C6 UL/cUL (UL60950-1: 2nd edition.), TUV/GS (EN60950-1: 2nd edition), CE B Class B Class RoHS and UL 94V-1 DTIPU25-102~104 models CEC Level IV DTIPU16-105~111 models CEC Level V Vin = 220VAC Vin = 120VAC Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 5 DTIPU25 Series Up to 25 Watts Class I & II, Single Outputs AC/DC Desktop Power Supplies Rev. B MODEL SELECTION TABLE Model Number DTIPU25A-102 DTIPU25A-103 DTIPU25A-104 DTIPU25A-105 DTIPU25A-106 DTIPU25A-107 DTIPU25A-108 DTIPU25A-109 DTIPU25A-110 DTIPU25A-111 *DTIPU25B-102 *DTIPU25B-103 *DTIPU25B-104 DTIPU25B-105 DTIPU25B-106 DTIPU25B-107 DTIPU25B-108 DTIPU25B-109 DTIPU25B-110 DTIPU25B-111 DTIPU25C-102 DTIPU25C-103 DTIPU25C-104 DTIPU25C-105 DTIPU25C-106 DTIPU25C-107 DTIPU25C-108 DTIPU25C-109 DTIPU25C-110 DTIPU25C-111 Input Voltage Range 90 ~ 264 VAC 90 ~ 264 VAC 90 ~ 264 VAC Output Voltage 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 48 VDC 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 48 VDC 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 48 VDC Output Current 3.30 ~ 2.75 A 3.33 ~ 2.50 A 2.75 ~ 2.00 A 2.27 ~ 1.92 A 1.92 ~ 1.56 A 1.56 ~ 1.19 A 1.19 ~ 0.92 A 0.92 ~ 0.75 A 0.75 ~ 0.62 A 0.62 ~ 0.52 A 3.30 ~ 2.75 A 3.33 ~ 2.50 A 2.75 ~ 2.00 A 2.27 ~ 1.92 A 1.92 ~ 1.56 A 1.56 ~ 1.19 A 1.19 ~ 0.92 A 0.92 ~ 0.75 A 0.75 ~ 0.62 A 0.62 ~ 0.52 A 3.30 ~ 2.75 A 3.33 ~ 2.50 A 2.75 ~ 2.00 A 2.27 ~ 1.92 A 1.92 ~ 1.56 A 1.56 ~ 1.19 A 1.19 ~ 0.92 A 0.92 ~ 0.75 A 0.75 ~ 0.62 A 0.62 ~ 0.52 A Total Regulation 5% 5% 5% 5% 5% 5% 3% 3% 3% 3% 5% 5% 5% 5% 5% 5% 3% 3% 3% 3% 5% 5% 5% 5% 5% 5% 3% 3% 3% 3% Output Power 16.5W 20W 22W 25W 25W 25W 25W 25W 25W 25W 16.5W 20W 22W 25W 25W 25W 25W 25W 25W 25W 16.5W 20W 22W 25W 25W 25W 25W 25W 25W 25W Efficiency 75.23% 77% 79% 82.4% 82.4% 83% 84% 85% 85% 86% 75.23% 77% 79% 82.4% 82.4% 83% 84% 85% 85% 86% 75.23% 77% 79% 82.4% 82.4% 83% 84% 85% 85% 86% Class AC Inlet Class I IEC-320-C14 Class II IEC-320-C8 Class I IEC-320-C6 NOTES 1. The output voltage is specified as a range (ex: 40~48VDC); the customer must specify what they would like the output voltage set at. 2. The “*” represents PSE approval. 3. Model DTIPU25-102~104 has been approved by CEC Level IV Models DTIPU25-105~111 have been approved by CEC Level V 4. Optional output connectors available. Please call factory for ordering details. DERATING CURVE 120 Output Power (%) 100 80 60 40 20 0 -20 -10 0 10 20 30 40 50 60 70 80 Ambient Temperature (°C) 06/27/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 5 DTIPU25 Series Up to 25 Watts Class I & II, Single Outputs AC/DC Desktop Power Supplies Rev. B MECHANICAL DRAWING TYPE A Unit: inches (mm) 4.11±0.04 (104.4±1.0) 0.02±0.04 (0.5±1.0) 0.04±0.04 (1.0±1.0) 1.22±0.04 (31.0±1.0) 1.65±0.04 (42.0±1.0) NOTES: 1. All dimensions are for reference only 2. Weight is 6oz (170g) 3. Optional output connectors available TYPE A IEC-320-C14 TYPES B & C Unit: inches (mm) 3.90±0.04 (99.0±1.0) 0.02±0.04 (0.5±1.0) TYPE B 1.65±0.04 (42.0±1.0) NOTES: 1. All dimensions are for reference only 2. Weight is 6oz (170g) 3. Optional output connectors available 0.04±0.04 (1.0±1.0) 1.22±0.04 (31.0±1.0) IEC-320-C8 TYPE C IEC-320-C6 06/27/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 5 Rev. B DTIPU25 Series Up to 25 Watts Class I & II, Single Outputs AC/DC Desktop Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 06/27/2012 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 5 of 5