DATASHEET Rev. A DTMPU51 SERIES 90~264VAC Input Voltage Range Class I, Up to 50 Watts Single, Dual, and Triple Outputs 3rd Edition Medical Approvals Medical AC/DC Desktop Power Supplies MEDICAL FEATURES Class I Wide Input Voltage Range: 90~264VAC RoHS Compliant Over Voltage and Over Load Protection UL 94V-1 Compliant Meets FCC Part-18 Class B and CISPR-11 EN55011 Class B CEC/Energy Star Level V Compliant IEC-320-C14 AC Inlet Connector 100% Burn-in Tested Emission Limits ANSI/AAMI ES 60601-1:2005 (UL/cUL 3rd Edition) and EN 60601-1:2006 (TUV/T-mark 3rd Edition) Safety Approvals Single, Dual, and Triple Outputs Input to Output: 2MOPP Up to 50 Watts Output Power Optional Output Connectors Available DESCRIPTION The DTMPU51 series of class I medical AC/DC desktop power supplies provides up to 50 Watts of continuous output power in a 5.75” x 2.99” x 1.69” package. This series consists of single, dual, and triple output models with a 90~264VAC input voltage range and an IEC-320-C14 AC inlet connector. These power supplies are protected against over voltage and over load conditions and have been 100% burn-in tested. All units are CEC/Energy Star Level V, UL 94V-1, and RoHS compliant. The DTMPU51 series also meets FCC Part-18 class B and CISPR-11 EN55011 class B emission limits and has ANSI/AAMI ES 60601-1:2005 (UL/cUL 3rd Edition) and EN 60601-1:2006 (TUV/T-mark 3rd Edition) medical approvals. 11/14/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 5 Rev. A DTMPU51 Series Class I, Up to 50 Watts Single, Dual, & Triple Outputs Medical AC/DC Desktop Power Supplies SPECIFICATIONS: DTMPU51 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT SPECIFICATIONS Operating Input Voltage Range Safety Approvals Input Voltage Range Operating Voltage Range Input Frequency Io = Full Load, Vin = 100VAC Io = Full Load, Vin = 240VAC Io = Full Load, 25°C, Cold Start, Vin = 115VAC Io = Full Load, 25°C, Cold Start, Vin = 230VAC No load, Vin = 230VAC Input Current Inrush Current No Load Power Consumption OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Output Power Output Current Io = Full Load Vin = 230VAC Vin = 90 to 264VAC Outputs under 3.3VDC Others Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 110VAC Io = Full Load, Vin = 100VAC Ripple & Noise (peak to peak) Dielectric Withstanding Voltage Isolation Resistance Safety Ground Leakage Current ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Storage Humidity Operating Altitude MTBF PHYSICAL SPECIFICATIONS Weight Io = Full Load, Vin = 230VAC Primary to Secondary Primary to PE Test Voltage = 500VDC Vin = 240VAC/60Hz Derating linearly from 100% Load at 50°C to 50% load at 70°C Operating Temp. at 25°C; calculated per MIL-HDBK-217F 264 240 63 1.04 0.53 35 70 See Table VAC Hz A A See Table 1 7 See Table See Table 2 1 4 % % % 16 0.3 -0.04 2 +0.04 ms ms s %/°C 112 110 132 150 % % 75 6321 2121 50 88 % VDC 0.25 0 -40 0 0 70 85 95 95 3000 100,000 hours MΩ mA °C °C % % m approx. 1.12~1.23 lbs (510~560g) 5.75 x 2.99 x 1.69 inches (146.0 x 76.0 x 43.0 mm) IEC-320-C14 Dimensions (L x W x H) 11/14/2012 0.5 3 Full load, Vin = 90VAC Transient Response Time Hold-Up Time Start-Up Time Temperature Coefficient PROTECTION Over Voltage Protection Over Current Protection GENERAL SPECIFICATIONS Efficiency AC Inlet Connector SAFETY & COMPLIANCE Safety Approvals EMI Requirements Compliance 90 100 47 0.91 0.43 ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd ed.), EN 60601-1:2006 (TUV/T-mark 3rd ed.), CE FCC Part-18 Class B and CISPR-11 EN55011 Class B RoHS, UL 94V-1, CEC/Energy Star Level V Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 5 DTMPU51 Series Class I, Up to 50 Watts Single, Dual, & Triple Outputs Medical AC/DC Desktop Power Supplies Rev. A MODEL SELECTION TABLE SINGLE OUTPUT MODELS Model Number DTMPU51-101 DTMPU51-102 DTMPU51-103 DTMPU51-104 DTMPU51-105 DTMPU51-106 DTMPU51-107 DTMPU51-108 DTMPU51-109 DTMPU51-110 DTMPU51-111 Input Voltage Output Voltage (1) 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 3 ~ 5 VDC 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 50 VDC Maximum Output Current 10.0 ~ 8.00A 8.00 ~ 6.66A 7.00 ~ 5.25A 5.63 ~ 4.00A 4.00 ~ 3.46A 3.46 ~ 2.81A 3.12 ~ 2.38A 2.30 ~ 1.85A 1.85 ~ 1.51A 1.51 ~ 1.25A 1.25 ~ 1.00A Maximum Output Power 40W 40W 42W 45W 45W 45W 50W 50W 50W 50W 50W No Load Power Consumption 2W 2W 3W 3W 3W 3W 3W 4W 4W 5W 6W Maximum Regulation 7% 5% 5% 5% 5% 6% 5% 5% 7% 5% 5% 5% 5% 5% Maximum Output Power No Load Power Consumption 40W 4W 42W 4W 42W 4W 42W 4W 26.5W 3W 42W 4W 42W 4W Maximum Regulation 7% 5% 5% 5% 5% 5% 5% 5% 5% 5% 6% 5% 5% 5% 5% 5% 5% 5% 7% 5% 5% Maximum Output Power No Load Power Consumption 42W 5W 42W 4W 42W 4W 42W 4W 42W 6W 42W 5W 42W 5W Total Regulation 5% 5% 5% 4% 3% 3% 3% 2% 2% 2% 2% DUAL OUTPUT MODELS Model Number DTMPU51-200 DTMPU51-201 DTMPU51-202 DTMPU51-203 DTMPU51-204 DTMPU51-209 DTMPU51-210 Vo1 Vo2 Vo1 Vo2 Vo1 Vo2 Vo1 Vo2 Vo1 Vo2 Vo1 Vo2 Vo1 Vo2 Input Voltage 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC Output Voltage +3.3 VDC +12 VDC +5 VDC +12 VDC +5 VDC +15 VDC +5 VDC +24 VDC +3.3 VDC +5 VDC +12 VDC -12 VDC +15 VDC -15 VDC Output Current Min Max. 0.5A 5A 0.2A 2A 0.5A 5A 0.2A 2A 0.5A 5A 0.15A 1.5A 0.5A 5A 0.1A 1A 0.5A 5A 0.2A 2A 0.3A 3A 0A 1A 0.2A 2A 0.1A 1A TRIPLE OUTPUT MODELS Model Number DTMPU51-300 DTMPU51-301 DTMPU51-302 DTMPU51-303 DTMPU51-304 DTMPU51-305 DTMPU51-306 Vo1 Vo2 Vo3 Vo1 Vo2 Vo3 Vo1 Vo2 Vo3 Vo1 Vo2 Vo3 Vo1 Vo2 Vo3 Vo1 Vo2 Vo3 Vo1 Vo2 Vo3 Input Voltage 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC Output Voltage +3.3 VDC +12 VDC -12 VDC +5 VDC +12 VDC -5 VDC +5 VDC +12 VDC -12 VDC +5 VDC +15 VDC -15 VDC +5 VDC +24 VDC -24 VDC +5 VDC +24 VDC -12 VDC +3.3 VDC +12 VDC -5 VDC Output Current Min Max. 0.5A 5A 0.4A 2A 0.1A 0.8A 0.5A 5A 0.2A 2A 0A 0.8A 0.5A 5A 0.2A 2A 0.1A 0.8A 0.5A 5A 0.4A 2A 0.1A 0.8A 0.5A 5A 0.2A 1A 0A 0.5A 0.5A 5A 0.1A 1A 0A 0.8A 0.5A 5A 0.4A 2A 0.1A 0.8A NOTES 1. For single output models the output voltage is specified as a range (ex: 40~50VDC); the customer must specify what they would like the output voltage set at. 2. Optional output connectors available. Please call factory for ordering details. 11/14/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 5 DTMPU51 Series Class I, Up to 50 Watts Single, Dual, & Triple Outputs Medical AC/DC Desktop Power Supplies Rev. A DERATING CURVE Output Power (%) 120 NOTES 1. Operating Temperature: 0 to +70°C 2. De-rating linearly from 100% load at 50°C to 50% load at 70°C 100 80 60 40 20 0 0 10 20 30 40 50 60 70 80 Ambient Temperature (°C) MECHANICAL DRAWING Unit: inches (mm) 2.99±0.04 (76.0±1.0) 5.75±0.04 (146.0±1.0) 0.043±0.002 (1.1±0.04) POWER 1.69±0.04 (43.0±1.0) AC INPUT IEC-320-C14 INLET TOP 11/14/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 5 Rev. A DTMPU51 Series Class I, Up to 50 Watts Single, Dual, & Triple Outputs Medical AC/DC Desktop Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 11/14/2012 (603)778-2300 (888)587-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 5 of 5