Rev B PSAK100 Series 100 Watt Single Output AC/DC Switching Power Supply FEATURES ● RoHS Compliant ● Withstand 5G Vibration Test ● Power ON with LED Indicator ● 100% Full Load Burn-In Tested ● Cooling by Free Air Convection ● Universal AC Input with Active PFC ● High Operating Temperature up to 70°C ● Brown-Out (Low AC Input Voltage) Protected ● High Efficiency, Long Life, and High Reliability ● All Using 105°C Long Life Electrolytic Capacitors ● Green Design, No Load Power Consumption < 0.5W ● Short Circuit, Over Load, and Over Voltage Protected DESCRIPTION The PSAK100 series of AC/DC switching power supplies provides 100 Watts of continuous output power in an enclosed design. All models have a single output and a universal input range. Some features include efficiency up to 89%, 0.98 typical power factor, active PFC, and < 0.5W no load power consumption. These supplies are Energy Star compliant and have brown-out, over load, over voltage, over temperature, and short circuit protection. All models are 100% full load burn-in tested. SPECIFICATIONS: PSAK100 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range (See Note 3) 90 ~ 264VAC (127~370VDC) Input Frequency 47 to 63Hz AC Current (typical) 1.1A @ 115VAC; 0.55A @ 230VAC Inrush Current (typical) 20A @ 115VAC; 35A @ 230VAC Leakage Current < 0.2mA @ 230VAC Power Factor (typical) 0.98 @ 115VAC and full load; 0.93 @ 230VAC and full load OUTPUT SPECIFICATIONS Output Voltage See Table Output Power See Table Output Voltage Adjustability ±10% Voltage Tolerance (See Note 2) PSAK-100-5: ±2%; PSAK-100-7.5: ±1.5%; PSAK-100-12~48: ±1.0% Line Regulation PSAK-100-5 & PSAK-100-7.5: ±1.0%; PSAK-100-12~48: ±0.5% Load Regulation PSAK-100-5 & PSAK-100-7.5: ±1.0%; PSAK-100-12~48: ±0.5% Output Current See Table Ripple & Noise (See Note 1) See Table Setup, Rise Time 300ms, 50ms at full load Hold-Up Time (typical) 32ms @ 230VAC and full load PROTECTION 115% ~ 140% rated output voltage Over Voltage Protection Protection Type: Latch-off mode 105% ~ 180% rated output power Over Load Protection Protection Type: Hiccup mode, recovers automatically after fault condition is removed. 90°C ±5°C detect on Core of the Transformer Over Temperature Protection Protection Type: Shutdown output voltage, after temperature goes down and re-power on to recover GENERAL SPECIFICATIONS Efficiency See Table Withstand Voltage 3KVAC (input to output); 1.5KVAC (input to FG); 0.5KVAC (output to FG) all for one minute Isolation Resistance 100MΩ/500VDC (input to output, input to FG, output to FG) ENVIRONMENTAL SPECIFICATIONS Working Temperature -20°C to +70°C (refer to derating curve) Storage Temperature -40°C to +85°C Working Humidity 20% to 90% RH (non-condensing) Storage Humidity 10% to 95% RH Vibration 10 ~ 500Hz, 5G 0.5Oct/min., Period of 60 min. each along X,Y,Z axis. Cooling Free air convection Temperature Coefficient ±0.03% / °C (0 ~ 50°C) MTBF 620,300 hours Compliance: MIL-HDBK-217F PHYSICAL SPECIFICATIONS Packing 650g (22.93oz) Dimensions (L x W x H) 6.18 x 3.86 x 1.65 inches; (157 x 98 x 42 mm) SAFETY & EMC (See Note 4) Safety Standards Meet UL/cUL 60950-1, TUV EN60950-1 Green Energy ENERGY STAR® Single Voltage External AC/DC and AC/AC power supplies Eligibility Criteria (Version 1.1) EMI Conduction & Radiation EN55022: 1998+A1: 2000+A2: 2003 Class B Harmonic Current EN61000-3-2: 2000+A2: 2005 Class A, EN61000-3-3: 1995+A1: 2001 EMS Immunity EN61204-3: 2000 EN50204 1998+A1: 2001+A2: 2003 light industry level, criteria A 01/11/2013 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 3 PSAK100 Series 100 Watt Single Output AC/DC Switching Power Supply Rev B MODEL SELECTION TABLE Output Voltage Output Current Ripple & Noise (1) Output Power Efficiency 5 VDC 20A 90mVp-p 100W 83% PSAK-100-7.5 7.5 VDC 13.5A 90mVp-p 101.2W 85% PSAK-100-12 12 VDC 8.5A 90mVp-p 102W 85% 90 ~ 264VAC 13.5 VDC 7.5A 90mVp-p 101.2W 86% (127 ~370VDC) 15 VDC 6.7A 90mVp-p 100.5W 88% PSAK-100-24 24 VDC 4.2A 120mVp-p 100.8W 89% PSAK-100-27 27 VDC 3.8A 120mVp-p 102.6W 89% PSAK-100-48 48 VDC 2.1A 200mVp-p 100.8W 89% Model Number Input Voltage PSAK-100-5 PSAK-100-13.5 PSAK-100-15 NOTES 1. Ripple & noise is measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1µF capacitor and a 47µF capacitor in parallel. 2. Tolerances include set up tolerance, line regulation, and load regulation. 3. Derating may be needed under low input voltages. Please check the derating curve for more details. 4. The power supply is considered a component, which will be installed into final equipment. The final equipment must be reconfirmed that it still meets EMC directives. DERATING CURVES 01/11/2013 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 3 Rev B PSAK100 Series 100 Watt Single Output AC/DC Switching Power Supply MECHANICAL DRAWING Unit: inches [mm] 01/11/2013 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 3