Download Data Sheet

Rev B
PSAK200 Series
200 Watt
Single Output
AC/DC Switching Power Supply
FEATURES
● Cooling Fan
● RoHS Compliant
● Withstand 5G Vibration Test
● Power ON with LED Indicator
● 100% Full Load Burn-In Tested
● Universal AC Input with Active PFC
● High Operating Temperature up to 70°C
● Brown-Out (Low AC Input Voltage) Protected
● High Efficiency, Long Life, and High Reliability
● All Using 105°C Long Life Electrolytic Capacitors
● Green Design, No Load Power Consumption < 0.5W
● Short Circuit, Over Load, and Over Voltage Protected
DESCRIPTION
The PSAK200 series of AC/DC switching power supplies provides 200 Watts of continuous output power in an enclosed design. All models
have a single output and a universal input range. Some features include efficiency up to 88%, 0.98 typical power factor, active PFC,
cooling fan, and < 0.5W no load power consumption. These supplies are Energy Star compliant and have brown-out, over load, over
voltage, over temperature, and short circuit protection. All models are 100% full load burn-in tested.
SPECIFICATIONS: PSAK200 Series
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage Range (See Note 3)
90 ~ 264VAC
(127~370VDC)
Input Frequency
47 to 63Hz
AC Current (typical)
2.3A @ 115VAC; 1.2A @ 230VAC
Inrush Current (typical)
25A @ 115VAC;
40A @ 230VAC
Leakage Current
< 0.2mA @ 230VAC
Power Factor (typical)
0.98 @ 115VAC and full load; 0.93 @ 230VAC and full load
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Power
See Table
Output Voltage Adjustability
±10%
Voltage Tolerance (See Note 2)
PSAK-200-5: ±2%;
PSAK-200-7.5: ±1.5%;
PSAK-200-12~48: ±1.0%
Line Regulation
PSAK-200-5 & PSAK-200-7.5: ±1.0%;
PSAK-200-12~48: ±0.5%
Load Regulation
PSAK-200-5 & PSAK-200-7.5: ±1.0%;
PSAK-200-12~48: ±0.5%
Output Current
See Table
Ripple & Noise (See Note 1)
See Table
Setup, Rise Time
300ms, 50ms at full load
Hold-Up Time (typical)
16ms @ 230VAC and full load
PROTECTION
115% ~ 140% rated output voltage
Over Voltage Protection
Protection Type: Latch-off mode
105% ~ 180% rated output power
Over Load Protection
Protection Type: Hiccup mode, recovers automatically after fault condition is removed.
90°C ±5°C detect on Core of the Transformer
Over Temperature Protection
Protection Type: Shutdown output voltage, after temperature goes down and re-power on to recover
GENERAL SPECIFICATIONS
Efficiency
See Table
Withstand Voltage
3KVAC (input to output); 1.5KVAC (input to FG); 0.5KVAC (output to FG) all for one minute
Isolation Resistance
100MΩ/500VDC (input to output, input to FG, output to FG)
ENVIRONMENTAL SPECIFICATIONS
Working Temperature
-20°C to +70°C (refer to derating curve)
Storage Temperature
-40°C to +85°C
Working Humidity
20% to 90% RH (non-condensing)
Storage Humidity
10% to 95% RH
Vibration
10 ~ 500Hz, 5G 0.5Oct/min., period of 60 min. each along X,Y,Z axis.
Cooling
Cooling fan
Temperature Coefficient
±0.03% / °C (0 ~ 50°C)
MTBF
620,300 hours Compliance: MIL-HDBK-217F
PHYSICAL SPECIFICATIONS
Packing
800g (28.22oz)
Dimensions (L x W x H)
7.76 x 3.86 x 1.65 inches; (197 x 98 x 42 mm)
SAFETY & EMC (See Note 4)
Safety Standards
Meet UL/cUL 60950-1, TUV EN60950-1
Green Energy
ENERGY STAR® Single Voltage External AC/DC and AC/AC power supplies Eligibility Criteria (Version 1.1)
EMI Conduction & Radiation
EN55022: 1998+A1: 2000+A2: 2003 Class B
Harmonic Current
EN61000-3-2: 2000+A2: 2005 Class A, EN61000-3-3: 1995+A1: 2001
EMS Immunity
EN61204-3: 2000 EN50204 1998+A1: 2001+A2: 2003 light industry level, criteria A
01/11/2013
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 1 of 3
PSAK200 Series
200 Watt
Single Output
AC/DC Switching Power Supply
Rev B
MODEL SELECTION GUIDE
Output Voltage
Output Current
Ripple & Noise (1)
Output Power
Efficiency
5 VDC
40A
90mVp-p
200W
78%
PSAK-200-7.5
7.5 VDC
26.7A
90mVp-p
200W
81%
PSAK-200-12
12 VDC
16.7A
90mVp-p
200W
85%
90 ~ 264VAC
13.5 VDC
14.9A
90mVp-p
201W
86%
(127 ~370VDC)
15 VDC
13.4A
90mVp-p
201W
86%
PSAK-200-24
24 VDC
8.4A
120mVp-p
201W
87%
PSAK-200-27
27 VDC
7.5A
120mVp-p
202W
88%
PSAK-200-48
48 VDC
4.2A
200mVp-p
201W
88%
Model Number
Input Voltage
PSAK-200-5
PSAK-200-13.5
PSAK-200-15
NOTES
1. Ripple & noise is measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1µF capacitor and a
47µF capacitor in parallel.
2. Tolerances include set up tolerance, line regulation, and load regulation.
3. Derating may be needed under low input voltages. Please check the derating curve for more details.
4. The power supply is considered a component, which will be installed into final equipment. The final equipment must be reconfirmed that it still meets EMC directives.
DERATING CURVES
01/11/2013
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 2 of 3
Rev B
PSAK200 Series
200 Watt
Single Output
AC/DC Switching Power Supply
MECHANICAL DRAWING
Unit: inches [mm]
01/11/2013
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 3 of 3