537 SERIES PANEL INDICATOR LED Marl Part Number LED Colour 537-501-63 537-521-63 537-532-63 537-930-63 537-997-63 537-501-75 537-521-75 537-532-75 537-930-75 537-997-75 Red Yellow Green Blue Cool White Red Yellow Green Blue Cool White FEATURES BENEFITS • • • • • • • • • • • • • • • • • • Ø8.1mm mounting Nickel plated brass housing Sealed to IP67 - weatherproof Coloured diffused lens Internal potting Bi-polar circuitry Range of LED colour options Range of voltage options Standard industrial mounting size Suitable for industrial applications Suitable for external applications Diffused lens gives wide viewing angle Suitable for high vibration applications Suitable for AC or low voltage DC in any orientation Suitable for status panel indication Manufactured with internal resistor Outstanding reliability Vandal resistant Typical Voltage Vopr Typical Current DC Iopr Typical LED Luminous Intensity Typical LED Wavelength λp Operating Temp Topr * Storage Temp Tstg 12-28 Vac/dc 12-28 Vac/dc 12-28 Vac/dc 12-28 Vac/dc 12-28 Vac/dc 110 Vac 110 Vac 110 Vac 110 Vac 110 Vac Bi-polar 6-16 6-16 6-16 6-16 6-16 7 7 7 7 7 mA 236 @ 10mA 217 @ 10mA 1360 @ 10mA 270 @ 10mA 743 @ 10mA 112 103 814 154 393 mcd 625 590 520 470 See Below 625 590 520 470 See Below nm -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 °C -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 °C Typical Emission Colours Cool White LED X 0.275 0.28 0.29 Y 0.27 0.28 0.30 NOTES Intensities (lv) and colour shades of white (X-Y co-ordinates) may vary between LEDs within a batch. Additional LED Colours, Voltage Options and Flying Lead lengths available for semicustom projects. Please contact our Sales Team. All LED components are supplied in anti-static packaging. * For operating temperature derating graphs, please refer to sheet 2. To order please contact us on +44 (0) 1229 582 430 F +44 (0) 1229 585 155 | E [email protected] | www.leds.co.uk marlleds marlinternationallimited company/marl-international-limited Q 05480 DSN 537 Version 2014-09-25-093400. Page 1 of 2 537 SERIES PANEL INDICATOR LED TECHNICAL CHARACTERISTICS Series Max. Power Dissipation Panel Cutout Nut Mounting Torque Min. Mounting Centres Min. - Max. Panel Thickness 537 825 8.1 0.65 14.5 1.5 - 13.0 mW mm Nm mm mm TECHNICAL DRAWING Weight (g): 8.6 Dimensions in mm (typical). Not to scale. Mounting hole to be clean and burr free. 2.9 24 8.1 5 + 0.1 0 PUSH ON CONNECTOR 2.8 3.7 7 12.7 14.5 Mounting Hole 925-000-00 is brass tin plated - for use with 537 series lamps. Dimensions in mm (typical). Not to scale. DE-RATING GRAPHS 50 Forward Current If (mA) Forward Current If (mA) Red / Green / Blue / Cool White LED 40 30 20 40 30 20 10 10 0 Yellow LED 50 0 20 40 60 80 0 100 0 20 40 60 80 100 Ambient Temperature Ta (°C) Ambient Temperature Ta (°C) MATERIALS Body Nut Panel Seal Lens Encapsulation Lock Washer Termination Header Nickel Plated Brass Stainless Steel Grade 303 Viton Polycarbonate Black Polyurethane Zinc Plated Steel Silver Flash Coated Brass Nylon 66 A82 DESIGN CONSIDERATIONS Electro-Static Discharge (ESD) Build up of electro-static discharge occurs in many situations involving people moving and handling products.The range of possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015. it is operated. Therefore, care must be taken to operate the LED at the correct voltage / current values, depending upon the ambient temperature. Marl should be contacted if the device is to be operated outside the temperature range specified. Marl accept no liability for any product that is operated outside the stated voltage or temperature range. Voltage, Current and Temperature The forward voltage / current value of an LED is dependent upon the ambient temperature of the environment in which To order please contact us on +44 (0) 1229 582 430 F +44 (0) 1229 585 155 | E [email protected] | www.leds.co.uk marlleds marlinternationallimited company/marl-international-limited Q 05480 DSN 537 Version 2014-09-25-093400. Page 2 of 2