V I S H AY I N T E R T E C H N O L O G Y, I N C . Multilayer Ceramic Chip Capacitors Capacitors - For High Pulse Current Applications VJ Controlled Discharge Capacitor (CDC) Series Surface-Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications KEY BENEFITS • • • • • • • Voltage rating up to 1500 V Capacitance value up to 0.56 µF Low electrostrictive ceramic formulation Integrated resistor on the surface of the capacitor Available with tin/lead barrier termination (termination code “L”) Wet build process with reliable Noble Metal Electrode (NME) system Halogen-free according to IEC 61249-2-21 definition APPLICATIONS • Detonation devices • Down hole drilling • Electronic fusing END PRODUCTS • Military • Avionic and satellite systems RESOURCES • Datasheet: VJ Controlled Discharge Capacitor (CDC) - http://www.vishay.com/doc?45203 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0281-1111 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Multilayer Ceramic Chip Capacitors VJ Controlled Discharge Capacitor (CDC) Surface-Mount Multilayer Ceramic Chip Capacitors with www.vishay.com Vishay Vitramon Integrated Resistor for High Pulse Current Applications ELECTRICAL SPECIFICATIONS SELECTION CHART Note • Electrical characteristics at + 25 °C unless otherwise specified DIELECTRIC X7R (X5P) STYLE VJ3040 (1) VJ3640 (1) VJ4044 (1) EIA CODE VOLTAGE (VDC) 1000 1500 1000 1500 1000 1500 VOLTAGE CODE G R G R G R CAP. CODE CAP. 223 0.022 μF 273 0.027 μF 333 0.033 μF • 393 0.039 μF • 473 0.047 μF • • 563 0.056 μF • • • 683 0.068 μF • • • 823 0.082 μF • • • 104 0.10 μF • • • • • 124 0.12 μF • • • • • 154 0.15 μF • • • • • 184 0.18 μF • • • • • 224 0.22 μF • • • • 274 0.27 μF • • • 334 0.33 μF • • • 394 0.39 μF • 474 0.47 μF • 564 0.56 μF • 684 0.68 μF 824 0.82 μF 105 1.0 μF 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF Notes (1) See soldering recommendations: www.vishay.com/doc?45034 • Plastic tape Operating Temperature: - 55 °C to + 125 °C Capacitance Range: 33 nF to 560 nF Voltage Range: 1000 VDC to 1500 VDC Temperature Coefficient of Capacitance (TCC): X5P: ± 10 % from - 55 °C to + 85 °C, with 0 VDC applied X7R: ± 15 % from - 55 °C to + 125 °C, with 0 VDC applied Parallel Resistor: 500 MΩ ± 30 % Dissipation Factor (DF): 2.5 % maximum at 1.0 Vrms and 1 kHz Aging Rate: 1 % maximum per decade Insulation Resistance (IR): At + 25 °C without resistor: 100 000 MΩ minimum or 1000 ΩF, whichever is less. At + 125 °C without resistor: 10 000 MΩ minimum or 100 ΩF, whichever is less. Dielectric Strength Test: Performed per Method 103 of EIA 198-2-E. Applied test voltages: 1000 VDC/1500 VDC-rated: 120 % of rated voltage ORDERING INFORMATION VJ3640 (3) Y 184 CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE 3040 3640 4044 Y = X7R (X5P) Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples: 184 = 180 nF 334 = 330 nF K X J=±5% K = ± 10 % M = ± 20 % A T 8R (2) MARKING PACKAGING PROCESS CODE R CAPACITANCE TERMINATION DC VOLTAGE TOLERANCE RATING (1) X = Ni barrier 100 % tin plate matte finish L = Ni barrier with tin lead plated finish min. 4 % lead G = 1000 V R = 1500 V A = Unmarked T = 7" reel/plastic tape Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: [email protected] (2) Process Code must be added to control special requirements (3) Size designator may be replaced by four digit drawing number used to control non-standard products and/or special requirements DIMENSIONS in inches [millimeters] Revision: 13-Oct-11 Capacitors - For High Pulse Current Applications VJ Controlled Discharge Capacitor (CDC) Series W L T MAX. P EIA STYLE PART ORDERING NUMBER - VJ3040 - VJ3640 - VJ4044 LENGTH (L) WIDTH (W) 0.300 ± 0.015 [7.62 ± 0.38] 0.360 ± 0.015 [9.14 ± 0.38] 0.400 ± 0.015 [10.16 ± 0.38] 0.400 ± 0.015 [0.20 ± 0.38] 0.400 ± 0.015 [10.20 ± 0.38] 0.440 ± 0.015 [11.17 ± 0.38] MAXIMUM THICKNESS (T) 0.100 [2.54] 0.086 [2.18] 0.120 [3.05] TERMINATION (P) MIN. MAX. 0.010 0.030 [0.25] [0.76] 0.010 0.030 [0.25] [0.76] 0.010 0.030 [0.25] [0.76] Revision: 13-Oct-11 Document Number: 45203 1 2/2 VMN-PT0281-1111 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PRODUCT SHEET THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000