Reed Sensors Flange Mounting Sensor > 59135 59135 High Temperature Flange Mount Sensor + 57135 Actuator Description The 59135 is a high temperature flange mounting reed sensor 28.57mm x 19.05mm x 6.35mm (1.125” x 0.750” x 0.259”) with a choice of normally open, normally open high voltage, normally closed or changeover contacts. It’s case design enables screw or adhesive mounting. It is rated for operation up to 150°C. It is capable of switching up to 265Vac/300Vdc at 10VA. The 59135 functions best with the matching actuator 57135-000. Note: The 57135 Actuator is sold separately. Features • Two-part magnetically operated proximity sensor • High temperature rated • Cross-slotted mounting holes for optimum adjustability Agency Approvals Agency Agency File Number Benefits E61760 • Hermetically sealed, magnetically operated contacts continue to operate long after optical and other technologies fail due to contamination Note: Contact Littelfuse for specific agency approval ratings. Dimensions Dimensions in mm (inch) • No standby power requirement • Operates through non-ferrous materials such as wood, plastic or aluminium Applications 28.57 (1.125) • Position and limit sensing • Security system switch 9.53 (.375) 10.31 (.406) 3.43 (.135) 6.35 (.250) 28.57 (1.125) 6.35 (.250) 6.35 (.250) NOM. 9.53 (.375) 14.28 (.562) 3.18x7.82 (.125x.308 LG.) SLOT 2 • Linear actuators • Door switch 19.05 (.75) 3.18x7.82 (.125x.308 LG.) SLOT 2 15.88 (.625) 300 (11.81) • Customer defined sensitivity option • Choice of cable length and connector • Thermoset overmold material • Teflon insulated wires 19.05 (.75) 3.96x8.71 (.156x.343 LG.) 15.88 (.625) Schematics 3.43 (.135) 6.35 (.250) Switch Type Red Red Red Blue White Red Red © 2015 Littelfuse Revised: 10/29/15 Specifications are subject to change without notice. 1 and 2 3 4 littelfuse.com Reed Sensors Flange Mounting Sensor > 59135 59135 High Temperature Flange Mount Sensor + 57135 Actuator Electrical Ratings Normally Open Contact Type Switch Type Normally Open High Voltage Change Over Normally Closed 1 2 3 4 VA/Watt - max. 10 10 5 5 Vdc - max. Vac - max. Vdc - min. 200 140 250 300 265 400 175 120 200 175 120 200 Carry Adc - max. Aac - max. Adc - max. 0.5 0.35 1.2 0.4 0.30 1.4 0.25 0.18 1.5 0.25 0.18 1.5 Contact, Initial Insulation Ω - max. Ω - min. 0.2 1010 0.2 1010 0.2 109 0.2 109 Capacitance Contact pF - typ. 0.3 0.2 0.3 0.3 Temperature Operating °C -40 to +150 -20 to +150 -40 to +150 -40 to +150 Contact Rating Voltage 4 Current 4 1 Switching 2 Breakdown Switching Resistance 5 3 2 Product Characteristics Operate Time 6 ms - max. 1.0 1.0 3.0 3.0 Release Time 6 ms - max. 1.0 1.0 3.0 3.0 11ms 1⁄2 sine G - max. 100 100 50 50 50-2000 Hz G - max. 30 30 30 30 Shock 7 Vibration 7 Notes: 1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information. 2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details. 3. Breakdown Voltage - per MIL-STD-202, Method 301. 4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load. 5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens. 6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II). 7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202. 8. For custom modifications to the wire length or size, or adding a special connector, please contact Littelfuse. Sensitivity Options (Using 57135 Actuator) Select Option Switch Type S T Distance Pull-In AT Activate Distance Pull-In AT Activate mm (inch) mm (inch) Range Range Average Average U V Pull-In AT Range Activate Distance mm (inch) Average Pull-In AT Range Activate Distance mm (inch) Average 1 Normally Open 12-18 18.5 (.729) 17-23 17.1 (.673) 22-28 15.8 (.622) 27-33 15.1 (.595) 2 High Voltage -- -- 17-23 17.1 (.673) 22-28 15.8 (.622) 27-33 15.1 (.595) 3 Change Over 15-20 16.7 (.657) 20-25 14.7 (.579) 25-30 13.4 (.528) -- -- 4 Normally Closed 15-20 16.7 (.657) 20-25 14.7 (.579) 25-30 13.4 (.528) -- -- Note: D 1. Pull-In AT Range: These AT values are the bare reed switch AT before modification. 2. The activation distance is average value on the final sensor assembly © 2015 Littelfuse Revised: 10/29/15 Specifications are subject to change without notice. littelfuse.com Reed Sensors Flange Mounting Sensor > 59135 59135 High Temperature Flange Mount Sensor + 57135 Actuator Part Numbering System Cable Length Specification Sensor: Cable Type: 20 AWG 19/32 FEP UL1130/UL1332 Select Option Cable Length mm (inch) 02 300 (11.81) 59135 - X - X - XX - X Series Termination Specification Switch Type 1, 2, 3, or 4 Termination Options Select Option Sensitivity S, T, U, or V Description (Two-wire versions illustrated) A Tinned leads (6.4±0.76)mm F Untinned leads (6.4±0.76)mm E JST type XHP 2.5mm pitch Cable Length 02 Termination A, E, or F Actuator: 57135 - 000 Series Standard Actuator 000 Note: The 57135 Actuator is sold separately. Packaging Packaging Option Packaging Specification Bulk © 2015 Littelfuse Revised: 10/29/15 Specifications are subject to change without notice. Bulk Quantity 500 Quantity & Packaging Code N/A Taping Width N/A littelfuse.com