MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414 1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com 30KP SERIES GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-30.0 TO 400 Volts 30000 Watt Peak Pulse Power FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Glass passivated junction • 30000W Peak Pulse Power capability on 10/1000 µs waveform • Excellent clamping capability • Repetition rate (duty cycle):0.05% • Low incremental surge resistance • Fast response time: typically less than 1.0 ps from 0 volts to BV • High temperature soldering guaranteed: 265°C/10 seconds/.375", (9.5mm) lead length, 5lbs., (2.3kg) tension MECHANICAL DATA Case:Molded plastic over glass passivated junction Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bipolar Mounting Position: Any Weight: 0.07 ounce, 2.1 gram P-600 1.0(25.40) MIN .360(9.14) .340(8.64) DIA .360(9.14) .340(8.64) 1.0(25.40) MIN .052(1.32) .048(1.22) Dimensions in inches (milimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types 30KP30 thru types 30KP400 Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. RATING Peak Pulse Power Dissipation on 10/1000 µs waveform (NOTE 1) Peak Pulse Current of on 10-1000 µs waveform (NOTE 1) Steady State Power Dissipation at Tl=75 °C Lead Lengths.375", (9.5mm)(NOTE 2) SYMBOL VALUE UNITS PPPM Minimum 30000 Watts IPPM SEE TABLE 1 Amps PM(AV) 8.0 Watts Peak Forward Surge Current, 8.3ms Sine-Wave IFSM 400.0 Superimposed on Rated Load, (JEDEC Method) (NOTE 3) Operatings and Storage Temperature Range TJ, TSTG -55 to +175 NOTES: 1.Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2. 2.Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5. 3.8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum Certified RoHS Compliant UL File # E223026 Amps °C 12/9/2013 MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414 1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com 10000 Non-repetitive pulse waveform shown in Fig. 3TA = 25ºC 1000 100 10 1 1 0.1 10 100 1,000 10,000 100,000 td PULSE WIDTH 1 µsec FIG. 1 PEAK PULSE POWER RATING Fig.2 - Pulse Derating Curve 100 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage,% 87.5 75 62.5 50 37.5 25 12.5 0 0 25 50 75 100 125 150 175 200 TA - Ambient Temperature (°C) IPPM - Peak Pulse Current,% IRSM Pppm 1 PEAK PULSE POWER 1 KW 30KP Series Rating and Characteristic Curves 150 TJ = 25°C Pulse Width(td)is defined as the point where the peak current decays to 50% of IPPM tr = 10μsec. Peak Value IPPM 100 Half Value- IPPM 2 10/1000μsec.Waveform as defined by R.E.A. 50 td 0 0 1.0 3.0 t - Time(ms) 2.0 3.0 4.0 4.0 Fig.3 - Pulse Waveform 12/9/2013 MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414 1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com 30000 Watt TVS UNI-POLAR BI-POLAR PEAK REVERSE BREAKDOWN TEST MAXIMUM REVERSE VOLTAGE PULSE STANDOFF CURRENT CLAMPING LEAKAGE VBR (V) VOLTAGE (IT) VOLTAGE CURRENT @ VRWM IR IPP (A) VRWM (V) @IPP Vc (V) MIN. @ IT mA (µA) 28.00 31.28 50 50.0 30KP28A 30KP28CA 30.00 33.51 50 55.2 30KP30A 30KP30CA 33.00 36.9 50 58.5 30KP33A 30KP33CA 36.00 40.2 50 61.8 30KP36A 30KP36CA 39.00 43.6 20 67.2 30KP39A 30KP39CA 42.00 46.9 10 72.0 30KP42A 30KP42CA 43.00 48.0 10 73.0 30KP43A 30KP43CA 45.00 50.3 5 77.4 30KP45A 30KP45CA 48.00 53.6 5 81.6 30KP48A 30KP48CA 51.00 57.0 5 86.4 30KP51A 30KP51CA 54.00 60.3 5 91.4 30KP54A 30KP54CA 58.00 64.8 5 92.4 30KP58A 30KP58CA 60.00 67.0 5 102.0 30KP60A 30KP60CA 64.00 71.5 5 104.0 30KP64A 30KP64CA 66.00 73.7 5 107.0 30KP66A 30KP66CA 70.00 78.2 5 109.0 30KP70A 30KP70CA 71.00 79.3 5 111.5 30KP71A 30KP71CA 72.00 80.4 5 114.0 30KP72A 30KP72CA 75.00 83.8 5 119.4 30KP75A 30KP75CA 78.00 87.1 5 129.0 30KP78A 30KP78CA 84.00 93.8 5 139.2 30KP84A 30KP84CA 90.00 100.5 5 146.4 30KP90A 30KP90CA 96.00 107.2 5 156.0 30KP96A 30KP96CA 102.00 113.9 5 165.6 30KP102A 30KP102CA 108.00 120.6 5 175.2 30KP108A 30KP108CA 120.00 134.0 5 194.4 30KP120A 30KP120CA 132.00 147.4 5 213.0 30KP132A 30KP132CA 144.00 160.8 5 223.2 30KP144A 30KP144CA 150.00 167.6 5 233.4 30KP150A 30KP150CA 156.00 174.3 5 245.0 30KP156A 30KP156CA 160.00 178.7 5 252.6 30KP160A 30KP160CA 168.00 187.7 5 272.4 30KP168A 30KP168CA 170.00 189.9 5 275.0 30KP170A 30KP170CA 180.00 201.1 5 290.4 30KP180A 30KP180CA 198.00 221.2 5 319.8 30KP198A 30KP198CA 216.00 241.3 5 348.6 30KP216A 30KP216CA 240.00 268.1 5 387.0 30KP240A 30KP240CA 258.00 288.2 5 416.4 30KP258A 30KP258CA 260.00 290.4 5 416.0 30KP260A 30KP260CA 270.00 301.6 5 436.2 30KP270A 30KP270CA 280.00 312.8 5 464.0 30KP280A 30KP280CA 288.00 321.7 5 469.9 30KP288A 30KP288CA 300.00 333.0 5 483.0 30KP300A 30KP300CA 350.00 389.0 5 564.0 30KP350A 30KP350CA 400.00 444.0 5 644.0 30KP400A 30KP400CA For bidirectional type having Vrwm of 40 volts and less, the IR limit is double. For parts without A , the VBR is + 10% Certified RoHS Compliant UL File # E223026 606.0 548.9 517.2 490.3 450.9 420.8 415.1 391.5 371.3 350.7 331.5 327.9 297.1 291.3 283.2 278.0 271.7 265.8 253.8 234.9 217.7 207.0 194.2 183.0 172.9 155.9 142.3 135.8 129.8 123.7 120.0 111.2 110.2 104.3 94.7 86.9 78.3 72.8 72.8 69.5 65.3 64.5 62.0 53.0 46.0 5000 5000 5000 5000 2000 1000 1000 250 150 50 20 20 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12/9/2013