05411 PLC03-3.3LC & PLC03-6LC Only One Name Means ProTek’Tion™ HIGH POWER LOW CAPACITANCE TVS ARRAY DESCRIPTION The PLC03-xxLC series are low capacitance, high powered TVS arrays available in a SO-8 package. These devices are designed to protect high speed data line applications from the damaging effects of ESD, EFT and secondary transient threats. The PLC03-xxLC series has a peak pulse power rating of 1800 Watts for an 8/20µs waveshape. These devices meet the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. SO-8 PACKAGE FEATURES APPLICATIONS • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 94A, 8/20µs - Level 4(LineGnd), 48A, Level 1 (Power) & 48A, Level 4(Line-Line) • 100A (2/10µs) per Bellcore GR1089 (Intra-Building) • ESD Protection > 25 kilovolts • 1800 Watts Peak Pulse Power per Line (tp = 8/20µs) • Low Capacitance: 6pF Typ (I/O to GND) • Telecom/Diode Bridge • RoHS Compliant • REACH Compliant • T1/E1 Line Cards • ISDN U-Interfaces & ISDN S/T Interfaces • xDSL Interfaces • Ethernet 10/100/1000 Base T • Set Top Box Interface MECHANICAL CHARACTERISTICS • Molded JEDEC SO-8 Package • Approximate Weight: 70 milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 12mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CONFIGURATION 05411.R2 12/15 8 7 6 5 1 2 3 4 Page 1 www.protekdevices.com 05411 PLC03-3.3LC & PLC03-6LC Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS TL -55 to 150 °C Storage Temperature TSTG -55 to 150 °C Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 1800 Watts Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER DEVICE MARKING RATED STAND-OFF VOLTAGE MINIMUM SNAPBACK VOLTAGE VWM VOLTS @50mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (Fig. 2) (Note 1-2) @ 8/20µs V C @ IPP MAXIMUM CLAMPING VOLTAGE (Line-Gnd) @ 8/20µs @I P = 50A VC VOLTS MAXIMUM LEAKAGE CURRENT @V WM ID µA TYPICAL TYPICAL CAPACITANCE CAPACITANCE (Note 3) (Note 4) @0V, 1MHz C pF @0V, 1MHz C pF PLC03-3.3LC PBLC 3.0 2.8 18.0V @ 100.0A 14.0 2.0 6 3 PLC03-6LC P6LC 6.0 6.8 20.0V @ 90.0A 15.0 2.5 6 3 NOTES 1. 2. 3. 4. For an 8/20µs waveform, apply positive pulse to pin 1 or 8 to pin 2 or 3 (ground). Measured between pin 1 or 8 to pin 2 or 3. Measured between I/O pins and ground (pin 1 to 2). Measured between I/O pins (pin 1 to 4). 05411.R2 12/15 Page 2 www.protekdevices.com 05411 PLC03-3.3LC & PLC03-6LC Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - kilowatts 100 10 1800W, 8/20µs Waveform 1 0.1 0.1 10 100 td - Pulse Duration - µs Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs e-t 60 40 10,000 FIGURE 3 POWER DERATING CURVE Peak Pulse Power 8/20µs 80 % Of Rated Power tf 100 td = t/(IPP/2) 60 40 20 20 0 1,000 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 1 0 05411.R2 12/15 5 10 15 t - Time - µs 20 25 30 Page 3 0 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 www.protekdevices.com 05411 PLC03-3.3LC & PLC03-6LC Only One Name Means ProTek’Tion™ SO-8 PACKAGE INFORMATION OUTLINE DIMENSIONS DIM MILLIMETERS -A- INCHES MIN MAX MIN MAX A 4.80 5.00 0.189 0.196 B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.054 0.068 D 0.35 0.49 0.014 0.019 F 0.40 1.25 0.016 0.049 G 1.27 BSC 8 5 -B- 1 G 4 D 0.18 0.25 0.007 0.009 K 0.10 0.25 0.004 0.008 P 5.80 6.20 0.229 0.244 R 0.25 0.50 0.010 0.019 R x 45° C 0.05 BSC J + 0.010” (0.25mm) M B M 4 PL P 0° - 10° -T- K + 0.010” (0.25mm) M T B S A S 8 PL J F NOTES 1. 2. 3. 4. 5. 6. -T- = Seating plane and datum surface. Dimensions “A” and “B” are datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. A PAD LAYOUT DIMENSIONS DIM MILLIMETERS B INCHES MIN MAX MIN MAX A 1.14 1.40 0.045 0.055 B 0.64 0.89 0.025 0.035 C 6.22 - 0.245 - D 3.94 4.17 0.155 0.165 E 1.02 1.27 0.040 0.050 NOTES 1. Controlling dimension: inches. 05411.R2 12/15 D C E Page 4 www.protekdevices.com 05411 PLC03-3.3LC & PLC03-6LC Only One Name Means ProTek’Tion™ TAPE AND REEL P0 D t 10 Pitches Cumulative Tolerance on tape ± 0.2 P2 E F W K0 B0 A0 P User Direction of Feed SPECIFICATIONS REEL DIA. TAPE WIDTH 178mm (7”) 12mm A0 B0 K0 D E F W P0 P2 P tmax 6.50 ± 0.10 5.40 ± 0.10 2.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 0.25 NOTES 1. 2. 3. 4. 5. 6. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 1,000 pieces per 12mm tape. Suffix - T13 = 13” Reel - 2,500 pieces per 12mm tape. Bulk product shipped in tubes of 98 pieces per tube. Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package. ORDERING INFORMATION BASE PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE QTY PLC03-xxLC N/A -T7 1,000 7” 98 PLC03-xxLC N/A -T13 2,500 13” 98 This device is only available in a Lead-Free configuration. 05411.R2 12/15 Page 5 www.protekdevices.com 05411 PLC03-3.3LC & PLC03-6LC Only One Name Means ProTek’Tion™ COMPANY INFORMATION COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Asia Sales: [email protected] Europe Sales: [email protected] U.S. Sales: [email protected] Distributor Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2015 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05411.R2 12/15 Page 6 www.protekdevices.com