Tantalum High Reliability Commercial Off-the-Shelf (COTS) PRODUCTS T428 Series High Volumetric Efficiency Facedown MnO2 Why Choose KEMET Programs Supported KEMET applies world-class service and quality to deliver industry-leading, high performance capacitance solutions worldwide. With 95% of possible dielectric solutions, KEMET offers the world’s most complete line of surface mount and through-hole capacitor technologies across tantalum, ceramic, film, aluminum and paper dielectrics. One world. One KEMET. Typical applications include radar pulse and switched-mode power supply decoupling and filtering in the following industries: • Telecommunications • Industrial • Computer • Defense • Aerospace Features & Benefits • Highest capacitance and volumetric efficiency (CV/cc) of any molded leadframe product • Higher power dissipation • Pick-and-place friendly molded package eliminates “drops” associated with conformal coating • Enhanced ripple current • Taped and reeled per EIA 481-1 • SnPb termination finish • Laser-marked case • 100% surge current test available • Halogen-free epoxy • Extended range values • RoHS Compliance and lead-free terminations available Product Checklist • • • • • What is the circuit operating voltage? What is the application temperature? What are the physical space restrictions? What is the necessary reliability level? What is the expected annual volume? KEMET Electrical/Physical Characteristics Case Sizes P Tolerances + 5%, + 10%, + 20% Dielectric Tantalum MnO2 Temperature Range -55˚C to +125˚C Voltage Options 4 – 50 VDC Capacitance Values 15 – 470 µF Ordering Information T 428 Capacitor Class Series T= Tantalum High Volumetric Efficiency Facedown Hi-Rel MnO2 COTS P 227 K Case Capacitance Capacitance Sizes Code (pF) Tolerance P 006 A H 61 10 Voltage Failure Rate/ Design Lead Material Surge ESR First two J = ±5% 004 = 4 V A = N/A digits K = ±10% 006 = 6.3 V B = 0.1% represent M = ±20% 010 = 10 V /1000 hrs significant 015 = 15 V figures. Third 020 = 20 V digit specifies 025 = 25 V number of 035 = 35 V zeros 050 = 50 V H = Standard solder 61 = None 10 = Standard coated (SnPb 5% Pb 62 = 10 20 = Low minimum) cycles 25°C 30 = Ultra low T = 100% tin (Sn) 63 = 10 cycles, -55°C and 85°C For more information, samples and engineering kits, please visit us at www.kemet.com or call 1.877.myKEMET. SA0512 Copyright © 2012 KEMET