V i s h ay I n t e r t e c h n o l o g y, I n c . FILM CAPACITORS F339X1 330VAC Capacitors – Across-the-line X1 applications Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES AND BENEFITS • • • • • • • Rated voltage 330 VAC; 50 Hz to 60 Hz Capacitance range 0.001 μF to 2.2 μF Halogen-free product Maximum application temperature 110 °C Withstanding pulse loads: uncontrolled mains switching must be sustained Safe end-of-life behavior Safety standard approvals: –– IEC 60384-14 –– CSA -E384-14 –– UL 60384-14 –– CQC APPLICATIONS • For standard across the line X1 applications up to 330 VAC Resources • Datasheet: F339X1 330 VAC - www.vishay.com/doc?28185 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0362-1306 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i sh ay I n tertech n o l o g y, I n c . F339X1 330VAC Vishay www.vishay.com 330VAC FILMF339X1 CAPACITORS BCcomponents Vishay BCcomponents F339X1 330VAC nce Suppression Film Capacitors Interference Suppression Film Capacitors MKP Radial Potted Type MKP Radial Potted Type ; FEATURES Under development; samples available FEATURES • 7.5 mm to 27.5 mm lead pitch F339X1 330VAC • 7.5 mm to 27.5 mm lead pitch Capacitors – Across-the-line X1 applications • Supplied loose in box or taped on reel www.vishay.com • Material categorization: Film Capacitors definitions of compliance MKP Radial Potted Type For www.vishay.com/doc?99912 APPLICATIONS Under development; 68-1 please see FEATURES samples available APPLICATIONS • 7.5 mm to 27.5 mm lead pitch For standard across the line X1 applications F339X1 330VAC • Supplied loose in For See also application note: www.vishay.com/doc?28153 box or taped on across reel standard the line X1 applications See also application note: www.vishay.com/doc?28153 • Material categorization: Vishay BCcomponents For definitions of compliance please see www.vishay.com/doc?99912 nce Suppression Film Capacitors 0.00QUICK 1 µF to 2.2REFERENCE µF (preferred values according to E6) DATA MKP Radial Potted ± Type 20 %; range ± 10 %; (± 5se% Capacitance (E24 rieon s) request) 8-1 t; Vishay loose BCcomponents • Supplied in box or taped on reel • Material categorization: For definitions of compliance please see Interference Suppression www.vishay.com/doc?99912 APPLICATIONS 0.001 µF to 2.2 µF (preferred values according to E6) For standard across the line X1 applications ± 20 %; ± 10 %; (± 5 % on request) See also application note: www.vishay.com/doc?28153 Capacitance tole5r5a/n1c1e0/56/B FEATURES 330 Vclass Hz tord60 AC; 50acco Climatic testing ingHz to IEC 600 68-1 55/110/56/B • 7.5 mm to 27.5 mm lead pitch 800 V DC Rated Aloose C volin tabox ge or taped • Supplied QUICK REFERENCE DATA on reel 330 VAC; 50 Hz to 60 Hz 1 10 °C Permisrange sible(E24 DCsveorieltsa) ge Capacitance • Material categorization: 00 0.001 µF to 2.2 µF (preferred values according to8E6) IEC 60384-14 EN nand tem pe60384-14 ratplease ure see CapFor acMaximum itandefinitions ce toleraapplicatio nce of compliance ± 20 %; ± 10 %; (± 5 % on request) IEC 60065 requires pass. flamm. class B CSA-E384-14; UL 60384-14 Reference standardsCQC PeAPPLICATIONS rmissible DC voltage Polypropylene film www.vishay.com/doc?99912 Climatic testing class according to IEC 60068-1 55/110/56/B 800 VDC For standard across line Maximum applicatio n temthe pera tureX1 applications 1 10 °C Metallized SeeDielectric also application note: www.vishay.com/doc?28153 IEC 60384-14 and EN 60384-14 Polypropylene IEC 60065 requires pass. flamm. class B Metallized CSA-E384-14; UL 60384-14 CQC Mono construction 0.0Dielectric 01 µFConstruction to 2.2 µF (preferred values according to E6) Electrodes Plastic epoxy resin sealed, flame ± 20 %case, ; ± 10 %; (± 5 % on request) UL-class 55/110 /56/B 94 V-0 IEC 60384-14 and EN 60384-14 requires pass. flamm. class B CSA-E384-14; UL 60384-14 CQC 330 VAC; 50 HzIEC to 6060065 Hz Rated AC voltage Reference standards Electrodes VDC 1 10 °C Polypropylene film retardant film Mono construction Metallized Mono construction Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 Construction 330 VAC; 50 HzTinned to 60 Hzwire Encapsulation 800 VDC manufacturer’s type; code for dielectric material; C-value; tolerance; rated voltage; sub-class; Plastic case, epoxy resin sealed, flame retardant Leads Tinned wire Encapsulation manufacturer location; manufacturer's 110 °logo C or lettering; year and week; safety approvals UL-class 94 V-0 C-value; tolerance; rated voltage; sub-class; manufacturer’s type; code for dielectric material; IEC 60384-14 and EN 60384-14 LeadsMarking Tinned wire IEC 60065 requires pass. flamm. class B manufacturer location; manufacturer's logo or lettering; year and week; safety approvals C-value; tolerance; rated voltage; sub-class; manufacturer’s type; code for dielectric material; ts, contact [email protected] Marking CSA-E384-14; UL 60384-14 manufacturer location; manufacturer's logo or lettering; year and week; safety approvals CQC Note Polypropylene film and test requirements, contact [email protected] Note• For more detailed data w • For more detailedMetallized data and test requirements, contact [email protected] Mono construction 4 PINS DIMENSIONS ininMillimeters DIMENSIONS millimeters DIMENSIONS in millimeters I 2 PINS 2 PINS 2 PINS Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 l Tinned wire l Marking PITCH (mm) w C (μF) w w h I h Dimensions w x h x l (mm) C-value; tolerance; rated voltage; sub-class; manufacturer’s type; code for dielectric material; manufacturer location; manufacturer's logo or lettering; h year and week; safety approvals nts, contact [email protected] 7.5 Min.4 PINS Ø dt 6-2 Max. Marking Min. Max. P P1 ± 0.5 lt Ø dtP2 ± 0.5 PITCH (mm)P1 ± 0.5 PINS Note P 4 4PINS • Ø dt ± 10 % of standard diameter specified Ø dt 0.001 0.01 0.033 w 0.18 4.0 x 10.0 x 12.5 5.0 x 11.0 x 17.5 6.0 x 11.5 x 10.0 6.0 x 12.0 x 12.5 h 10.0 x 16.5 x 17.5 hMarking 6-2 22.5 P2 ± 0.5 Min. C (μF) 4 PINS 15 0.0056 w I 4.0 x 9.0 x 10.0 Ø dt lt Ø dt 0.001 10 P1 ± 0.50.1 Ø dt 6-2 27.5 P2 ± 0.5 0.22 w I Max. 0.68 2.2 Note Marking Min. 6.0 x 15.5 x 26.0 9.0 x 19.0 x 31.5 Dimensions • Ø dt ± 10 % of standard diameter specified Revision: 10-Jan-13 Document Number: 28185 1 h Document Number: 28185 w x h x l (mm) 1 12.5 x 22.5 x 26.5 21.0 x 31.0 x 31.0 For technical questions, contact: [email protected] Max. For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT Ø d 6 2 t SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ARE SUBJECT TO NGE WITHOUT NOTICE. Revision: THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT 10-Jan-13 Document Number: 28185 1 dt PECIFIC ØDISCLAIMERS, SET FORTH 0.5 www.vishay.com/doc?91000 P1 ± AT P2 ± 0.5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 d w PRODUCT SHEET 2/2 Document Number: 28185 VMN-PT0362-1306 1 For technical questions, contact: [email protected] This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO ANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000