PSIUU100 SERIES Up to 100 Watts, AC/DC Switching Power Supplies Rev A Wall Industries, Inc. FEATURES • Class I • -20°C to +70°C Operating Temperature Range • RoHS Compliant • Single Outputs Ranging from 3VDC to 50VDC • Internal EMI Filter • 3-Pin Input Connector • Up to 100 Watts Output Power • 2-Pin Input Connector Available (See PSIUU101 Series) • Active Power Factor Correction • UL/cUL(UL 60950-1: 2nd Ed.) & TUV/GS (EN 60950-1: 2nd Ed.) • Over Voltage Protection (Crowbar Design) BAUART GEPRUFT TYPE APPROVED Size: 5.00 x 3.21 x 1.44 inches 127.0 x 81.6 x 36.6 mm Weight: 1.05 lbs (475g) Safety Approvals • Over Current Protection • Meets FCC Part-15 Class B and CISPR-22 Class B Emission Limits • Wide Input Voltage Range: 90~260VAC • 100% Burn-in Tested DESCRIPTION The PSIUU100 series of Class I AC/DC switching mode power supplies provides up to 100 Watts of continuous output power in a 5.00” x 3.21” x 1.44” U-chassis package. This series has single output models ranging from 3VDC to 50VDC with a wide input voltage range of 90~260VAC. These power supplies have an internal EMI filter, active power factor correction, and over voltage and over current protection. This series also has UL/cUL (UL 60950-1: 2nd edition) and TUV/GS (EN 60950-1: 2nd edition) safety approvals and meets FCC Part-15 Class B and CISPR-22 Class B Emission limits. These units are well suited for use in industrial equipment as well as many other applications. All models are 100% burn-in tested. MODEL SELECTION TABLE PSIUU100-101 3 ~ 5 VDC 18.00 ~ 10.80 A 5% 54W No-Load Power Consumption 6W PSIUU100-102 5 ~ 6 VDC 14.00 ~ 11.66 A 5% 70W 6W PSIUU100-103 6 ~ 9 VDC 13.33 ~ 8.88 A 5% 80W 6W PSIUU100-104 9 ~ 11 VDC 11.11 ~ 9.09 A 5% 100W 6W 11 ~ 13 VDC 9.09 ~ 7.69 A 3% 100W 6W 13 ~ 16 VDC 7.69 ~ 6.25 A 3% 100W 6W 16 ~ 21 VDC 6.25 ~ 4.76 A 3% 100W 6W Model Number Input Voltage Range PSIUU100-105 90 ~ 260 VAC PSIUU100-106 PSIUU100-107 Output Voltage Output Current Total Regulation Output Power PSIUU100-108 21 ~ 27 VDC 4.76 ~ 3.70 A 2% 100W 6W PSIUU100-109 27 ~ 33 VDC 3.70 ~ 3.03 A 2% 100W 6W PSIUU100-110 33 ~ 40 VDC 3.03 ~ 2.50 A 2% 100W 6W PSIUU100-111 40 ~ 50 VDC 2.50 ~ 2.00 A 2% 100W 6W DERATING 120 Notes 1. Operating Temperature: -20°C to + 70°C Output Power (%) 100 2. Derating linearly from 100% load at 50°C to 50% load at 70°C 80 60 40 20 0 -20 02/25/2014 0 20 40 60 Ambient Temperature (°C) 70 80 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 PSIUU100 SERIES Up to 100 Watts, AC/DC Switching Power Supplies Rev A Wall Industries, Inc. TECHNICAL SPECIFICATIONS: PSIUU100 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Input Voltage Operating Input Voltage Range 90 260 Safety Approvals Input Voltage Range 100 47 240 63 2.0 2.0 50 100 6 1 Input Frequency Input Current Inrush Current No Load Power Consumption Power Factor Correction OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Output Power Output Current Vin = 100VAC, Io = full load Vin = 240VAC, Io = full load Vin = 115VAC, Io = full load, 25°C, cold start Vin = 230VAC, Io = full load, 25°C, cold start Vin = 230VAC, Io = no load Vin = 240VAC, Io = full load 0.95 LL to HL, full load Vin = 230VAC or 325VDC 0.5 2 Hold-up Time Start-up Time Transient Response Time Temperature Coefficient PROTECTION Over Voltage Protection Over Current Protection GENERAL SPECIFICATIONS Efficiency Vin = 110VAC, Io = full load Vin = 100VAC, Io = full load Vin = 100VAC, Io = Full load to half load 0~50°C 02/25/2014 A A W 1 5 % % See Table See Table Vin = 90VAC, Io = full load Isolation Resistance Leakage Current ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Storage Humidity Cooling MTBF PHYSICAL SPECIFICATIONS Weight Dimensions (L x W x H) Input Connector Output Connector SAFETY Safety Approvals EMI Requirements for CISPR-22 EMI Requirements for FCC PART-15 Hz See Table Ripple & Noise (peak to peak) Dielectric Withstanding Voltage VAC Outputs under 3.3VDC 2 Others 1 16 Vin = 230VAC, Io = full load Primary to Secondary Primary to PE Test Voltage = 500VDC Vin = 240VAC/60Hz MIL-HDBK-217F, 25°C -0.04 3 4 +0.04 ms s ms %/°C 112 110 132 150 % % 70 4242 2594 50 85 % VDC 0.75 Derating linearly from 100% Load at 50°C to 50% load at 70°C % -20 -40 0 0 +70 +85 95 95 Free air convection 100,000 MΩ mA °C °C % % hours 1.05 lbs (475g) 5.00 x 3.21 x 1.44 inch (127.0 x 81.6 x 36.6 mm) Mates with Molex housing 09-52-4054 and Molex 2478 crimp terminal Mates with Molex housing 09-52-4134 and Molex 2478 crimp terminal 220VAC 110VAC UL/cUL (UL 60950-1: 2nd edition); TUV/GS (EN 60950-1: 2nd edition) B Class B Class Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 PSIUU100 SERIES Up to 100 Watts, AC/DC Switching Power Supplies Rev A Wall Industries, Inc. MECHANICAL DRAWING 3.21±0.02 [81.6±0.5] 0.56±0.02 [14.3±0.5] 1.18±0.08 [30.0±2.0] 2.57±0.08 [65.2±2.0] 1.18±0.02 [30.0±0.5] PITCH=0.31 [7.92] AC INPUT 0.25±0.08 [6.4±2.0] 4.50±0.08 [114.3±2.0] 5.00±0.02 [127.0±0.5] 4.50±0.08 [114.3±2.0] 0.50±0.08 [12.7±2.0] 0.25±0.08 [6.4±2.0] 0.55±0.08 [13.9±2.0] 2.70±0.08 [68.6±2.0] P1 3.90±0.08 [99.1±2.0] L N G LED P2 DC OUTPUT 13 #6-32 (MOUTING HOLES)X3 1.44±0.08 [36.6±2.0] #6-32 (MOUTING HOLES)X6 PIN CONNECTIONS PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 DESIGNATION OUT OUT OUT OUT OUT OUT RTN RTN RTN RTN RTN RTN N/C 1 PITCH=0.16 [3.96] 0.66±0.02 [16.8±0.5] #6-32 (MOUTING HOLES)X2 NOTES 1. 2. 3. 4. 5. 6. Unit: Inches [mm] Weight: 1.05 lbs (475g) Input connector mates with Molex housing 09-52-4054 and Molex 2478 series crimp terminal Output connector mates with Molex housing 09-52-4134 and Molex 2478 series crimp terminal 2-pin input connector also available (See PSIUU101 Series) All dimensions are for reference only COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 02/25/2014 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Road Exeter, NH 03833 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3