PSLSU60 SERIES 60 Watts, AC/DC LED Power Supplies Rev C Wall Industries, Inc. FEATURES • • • • • • • • • • • • Class I RoHS Compliant IP67 Rated C.C. Mode and C.V. Mode Constant Current: 0.84~5.45A Constant Voltage: 11~58VDC Active Power Factor Correction 60 Watts Maximum Output Power Wide Input Voltage Range: 90~305VAC, 47~63Hz Internal EMI Filter Over Voltage, Over Current, & Over Temp. Protection Up to 90% High Efficiency DESCRIPTION Size: 6.61 x 1.67 x 1.22 inches 168.0 x 42.5 x 31.0 mm The PSLSU60 series of AC/DC LED switching power supplies provides a maximum power rating of 60W, with constant current ratings ranging from 0.84~5.45A and constant voltage ranging from 11~58VDC. These supplies have a 90-305VAC input voltage range, active PFC, an internal EMI filter, and high efficiency up to 90%. These supplies are housed in a 6.61” x 1.67” x 1.22” enclosure, rated to IP67 waterproof standards, which makes them suitable for harsh environments in industrial or commercial outdoor lighting applications. This series is RoHS compliant and has over voltage, over current, and over temperature protection. MODEL SELECTION TABLE Model Number PSLSU60-105-11V PSLSU60-105-12V PSLSU60-105-13V PSLSU60-107-16V PSLSU60-107-17V PSLSU60-107-18V PSLSU60-107-19V PSLSU60-107-20V PSLSU60-107-21V PSLSU60-108-21V PSLSU60-108-22V PSLSU60-108-23V PSLSU60-108-24V PSLSU60-108-25V PSLSU60-108-26V PSLSU60-108-27V PSLSU60-111-40V PSLSU60-111-41V PSLSU60-111-42V PSLSU60-111-43V PSLSU60-111-44V PSLSU60-111-45V PSLSU60-111-46V PSLSU60-111-47V PSLSU60-111-48V PSLSU60-111-49V PSLSU60-111-50V PSLSU60-112-50V PSLSU60-112-51V PSLSU60-112-52V PSLSU60-112-53V PSLSU60-112-54V PSLSU60-112-55V PSLSU60-112-56V PSLSU60-112-57V PSLSU60-112-58V Input Voltage Range 90 ~ 305 VAC 90 ~ 305 VAC 90 ~ 305 VAC 90 ~ 305 VAC 90 ~ 305 VAC Output Voltage (1) Output Current Ripple & Noise 11 VDC 12 VDC 13 VDC 16 VDC 17 VDC 18 VDC 19 VDC 20 VDC 21 VDC 21 VDC 22 VDC 23 VDC 24 VDC 25 VDC 26 VDC 27 VDC 40 VDC 41 VDC 42 VDC 43 VDC 44 VDC 45 VDC 46 VDC 47 VDC 48 VDC 49 VDC 50 VDC 50 VDC 51 VDC 52 VDC 53 VDC 54 VDC 55 VDC 56 VDC 57 VDC 58 VDC 0 ~ 5.45 A 0 ~ 5.00 A 0 ~ 4.61 A 0 ~ 3.75 A 0 ~ 3.52 A 0 ~ 3.33 A 0 ~ 3.15 A 0 ~ 3.00 A 0 ~ 2.85 A 0 ~ 2.85 A 0 ~ 2.72 A 0 ~ 2.60 A 0 ~ 2.50 A 0 ~ 2.40 A 0 ~ 2.30 A 0 ~ 2.22 A 0 ~ 1.50 A 0 ~ 1.46 A 0 ~ 1.42 A 0 ~ 1.39 A 0 ~ 1.36 A 0 ~ 1.33 A 0 ~ 1.30 A 0 ~ 1.27 A 0 ~ 1.25 A 0 ~ 1.22 A 0 ~ 1.20 A 0 ~ 1.20 A 0 ~ 1.17 A 0 ~ 1.15 A 0 ~ 1.13 A 0 ~ 1.11 A 0 ~ 1.09 A 0 ~ 1.07 A 0 ~ 1.05 A 0 ~ 1.03 A 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% Load Regulation C.C. C.V. 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% Output Power 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W 60W NOTES 1. For constant current (C.C.) mode, the output voltage will vary from Vo to 0.6 x Vo (See C.V. vs C.C. curve on page 3). 07/08/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 Rev C Wall Industries, Inc. PSLSU60 SERIES 60 Watts, AC/DC LED Power Supplies SPECIFICATIONS: PSLSU60 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT SPECIFICATIONS Safety Approvals Input Voltage Range Operating Input Voltage Range Input Voltage Range Input Frequency No Load Power Consumption Io = Full Load, Vin = 100VAC Io = Full Load, Vin = 240VAC Io = Full Load, 25°C, Cold Start, Vin = 115VAC Io = Full Load, 25°C, Cold Start, Vin = 230VAC Io = No Load, Vin = 230VAC Power Factor Correction (PFC) Io = Full Load, Vin = 90~280VAC Input Current Inrush Current 100 90 47 277 305 63 VAC Hz 1.0 0.4 A 35 70 1 0.90 A W 1.0 OUTPUT SPECIFICATIONS Output Voltage Range See Note 1 See Table Output Current Range See Table Output Power 60 W Load Regulation Vin = 230VAC Line Regulation Io = Full Load Ripple & Noise (peak to peak) Full Load, Vin = 90VAC 1 % Transient Response Time Full Load to Half Load, Vin = 100VAC 4 ms Hold-Up Time (C.V. Mode) Io = Full Load, Vin = 110VAC Start-Up Time Io = Full Load, Vin = 100VAC Temperature Coefficient 3 % 0.5 1 8 % ms -0.04 1 s +0.04 %/°C PROTECTION Over Voltage Protection 103 103 140 105 105 180 optional % C.C. Mode C.V. Mode 84 4242 2121 50 90 % Isolation Resistance Io = Full Load, Vin = 230VAC Primary to Secondary Primary to PE Test Voltage = 500VDC Safety Ground Leakage Current Vin = 240VAC/60Hz Over Current Protection Over Temperature Protection % GENERAL SPECIFICATIONS Efficiency Dielectric Withstanding Voltage VDC MΩ 0.75 mA ENVIRONMENTAL SPECIFICATIONS Operating Temperature -20 +70 °C Storage Temperature Derating linearly from 100% Load at 50°C to 50% load at 70°C -40 +85 °C Operating Humidity 0 95 % Storage Humidity 0 95 % Cooling Free air convection MTBF Operating Temperature at 25°C, calculated per MIL-HDBK-217F 100,000 hours PHYSICAL SPECIFICATIONS Case Material Plastic Input Connector SJTW, 18AWGx3C (1ft) Output Connector SJTW, 18AWGx2C (1ft) Weight Approx. 1.17~1.32 lbs (530~600g) Dimensions (L x W x H) 6.61 x 1.67 x 1.22 in (168.0 x 42.5 x 31.0 mm) SAFETY Safety Approvals 07/08/2014 UL/cUL TUV CE-EMC UL8750: 1st edition EN/IEC61347-1:2008, EN/IEC61347-2-13:2006 EN55015: 2006 & EN61547: 1995+A1:2000 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 PSLSU60 SERIES 60 Watts, AC/DC LED Power Supplies Rev C Wall Industries, Inc. CHARACTERISTIC CURVES Derating Curve C.V. vs C.C. Curve 120 Output Voltage (VDC) Output Power (%) 100 80 60 40 20 0 -20 0 20 30 40 50 60 Ambient Temperature (°C) 70 Vo Current will regulate to 3% or 5% Iomax depending on model (See Model Selection Table) C.C. Range 0.6xVo 80 Iomin Iomax Output Current (A) MECHANICAL DRAWING 0.14 [3.6] 6.61 [168.0] 6.12 [155.4] R2.0 0.64 [16.2] 1.67 [42.5] 1.22 [31.0] 0.11 [2.7] NOTES: 1. Unit: inches [mm] 2. Tolerance: ±0.04 [±0.1] 3. Weight: 1.17~1.32 lbs (530~600g) 4. Input Connector: SJTW, 18AWGx3C (1ft) 5. Output Connector: SJTW, 18AWGx2C (1ft) 6. All dimensions are for reference only COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: (603)778-2300 Toll Free: (888)597-9255 Fax: (603)778-9797 07/08/2014 E-mail: [email protected] Web: www.wallindustries.com Address: 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3