DATASHEET Rev. A PSMBU153 SERIES 90~260VAC Input Voltage Range Active Power Factor Correction, Single Outputs UL/cUL 3rd Edition Medical Approvals 150 Watt AC/DC Switching Power Supplies MEDICAL FEATURES Class I Wide Input Voltage Range: 90~260VAC, 47~63Hz RoHS Compliant Over Voltage and Over Current Protection Active Power Factor Correction Meets FCC Part-18 Class B and CISPR-11 EN55011 Class B 5” x 3” x 1.44” Open Frame Package 12VDC and 24VDC Single Outputs 100% Burn-in Tested 150 Watts Output Power Emission Limits ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd edition) and EN 60601-1:2006 (TUV/T-mark 3rd edition) Approvals Input to Output: 2MOPP DESCRIPTION The PSMBU153 series of Class I medical AC/DC switching power supplies provides 150 Watts of continuous output power in a compact 5” x 3” x 1.44” open frame package. This series consists of 12VDC and 24VDC single output models with a wide input voltage range of 90~260VAC. These power supplies have active power factor correction and over current and over voltage protection. All models meet FCC Part-18 Class B and CISPR-11 EN55011 Class B Emission Limits. This series also has ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd edition) and EN 60601-1:2006 (TUV/T-mark 3rd edition) safety approvals and also meets new CE requirements. All models are RoHS compliant and have been 100% burn-in tested. 10/01/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 4 PSMBU153 Series 150 Watt, Open Frame Single Outputs, Active PFC Medical AC/DC Power Supplies Rev. A SPECIFICATIONS: PSMBU153 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT SPECIFICATIONS Input Voltage Range Safety Approvals Input Voltage Range Operating Input Voltage Range Input Frequency Low Line Input Current High Line Low Line Inrush Current High Line Power Factor Correction (PFC) No Load Power Consumption OUTPUT SPECIFICATIONS Output Voltage Load Regulation Line Regulation Output Power Output Current Ripple & Noise (peak to peak) Transient Response Time Hold-Up Time Start-Up Time Temperature Coefficient PROTECTION Over Voltage Protection Over Current Protection GENERAL SPECIFICATIONS Efficiency Dielectric Withstanding Voltage Isolation Resistance Safety Ground Leakage Current ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Storage Humidity Operating Altitude MTBF PHYSICAL SPECIFICATIONS Weight Dimensions (L x W x H) Input Connector Output Connector SAFETY & EMI EMI Requirements for CISPR-11 EMI Requirements for FCC PART-18 Safety Approvals 10/01/2012 Io = Full Load, Vin = 100VAC Io = Full Load, Vin = 240VAC Io = Full Load, 25°C, Cold Start, Vin = 115VAC Io = Full Load, 25°C, Cold Start, Vin = 230VAC Io = Full Load, Vin = 240VAC Io = No Load, Vin = 230VAC 100 90 47 1.74 0.71 0.95 240 260 63 1.76 0.73 50 100 1.0 1.2 VAC Hz A A W See Table Vin = 230VAC Io = Full Load Vin = 90~260VAC 3 0.5 Full Load, Vin = 90VAC Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 110VAC Io = Full Load, Vin = 100VAC Io = Full Load, Vin = 230VAC Primary to Secondary Primary to PE Test Voltage = 500VDC Vin = 240VAC/60Hz 5 1 150 See Table 1 4 -0.04 2 +0.04 % ms ms s %/°C 112 110 132 150 % % 84 6990 2121 50 89 % 20 VDC 0.25 Derating linearly from 100% Load at 50°C to 50% load at 70°C Operating Temperature at 25°C, calculated per MIL-HDBK-217F % % W 0 -40 0 0 100,000 +70 +85 95 95 3000 MΩ mA °C °C % % m hours Approx. 14.8oz (420g) 5.00 x 3.00 x 1.44 inches (127.0 x 76.2 x 36.6 mm) Mates with Molex housing 09-50-3051 and Molex 2478 series crimp terminal Mates with Molex housing 09-50-3081 and Molex 2478 series crimp terminal or DINKLE#DT-2GN-B01W-04P and DINKLE#ESK750V-04P Vin = 220VAC B Class Vin = 110VAC B Class ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd edition); EN 60601-1:2006 (TUV/T-mark 3rd edition); CE Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 4 PSMBU153 Series 150 Watt, Open Frame Single Outputs, Active PFC Medical AC/DC Power Supplies Rev. A MODEL SELECTION TABLE Model Number Input Voltage Range Output Voltage Output Current Total Regulation Max. Output Power PSMBU153-105 90 ~ 260VAC 12 VDC 12.5 A 5% 150W PSMBU153-108 90 ~ 260VAC 24 VDC 6.25 A 3% 150W DERATING CURVE Output Power (%) 120 NOTES: 1. Operating Temperature: 0°C to +70°C 2. Derating linearly from 100% load at 50°C to 50% load at 70°C 100 80 60 40 20 0 0 10 20 30 40 50 60 70 80 Ambient Temperature (°C) MECHANICAL DRAWING 1.17±0.02 (29.6±0.5) Unit: inches (mm) 0.21±0.02 (5.45±0.5) 1.57±0.02 (40.0±0.5) 0.80±0.02 (20.3±0.5) M3*P0.02(P0.5) MOUNTING HOLES x 2 1.44±0.02 (36.6±0.5) 5.00±0.02 (127.0±0.5) 4.55±0.02 (115.6±0.5) 0.22±0.02 (5.7±0.5) 0.06 (1.6) PIN CONNECTIONS DC OUTPUT P2 L AC INPUT N G P1 8 0.71±0.02 (18.13±0.5) 2.57±0.02 (65.3±0.5) 1 0.45 (11.35±0.5) 3.00±0.02 (76.2±0.5) LED PITCH = 0.16 (3.96) PITCH = 0.31 (7.92) Pin Assignment 1 Vout 2 Vout 3 Vout 4 Vout 5 RTN 6 RTN 7 RTN 8 RTN 0.12 (3.0) max. Ø0.16 (Ø4) MOUNTING HOLES x 4 NOTES: 1. All dimensions are for reference only 2. Weight: Approximately 14.82oz (420g) 3. Input Connector: Mates with Molex housing 09-50-3051 and Molex 2478 series crimp terminal 4. Output Connector: Mates with Molex housing 09-50-3081 and Molex 2478 series crimp terminal or DINKLE#DT-2GN-B01W-04P and DINKLE#ESK750V-04P 10/01/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 4 Rev. A PSMBU153 Series 150 Watt, Open Frame Single Outputs, Active PFC Medical AC/DC Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 10/01/2012 (603)778-2300 (888)587-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 4