V I S H AY I N T E R T E C H N O L O G Y, I N C . THIN FILM CAPACITORS BRCP Thin Film Bar MOS Capacitors KEY BENEFITS • • • • Absolute tolerance down to ± 5 % Low TCC down to ± 50 ppm /ºC Robust MOS construction Multiple wire bonds can be accommodated on both case sizes, 7 for the lowest values of Case A and 15 for the lowest values of Case B • Excellent load life stability • Offered in two case sizes, 120 x 35 mils and 240 x 35 mils APPLICATIONS Hybrid assemblies, SiC or GaN high-frequency/high power applications RESOURCES • Datasheet: BRCP - www.vishay.com/doc?61106 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0443-1502 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . THIN FILM CAPACITORS BRCP www.vishay.com www.vishay.com Thin Film Bar MOS Capacitors ThinFilm FilmBar BarMOS MOS Capacitors Thin Capacitors FEATURES BRCP BRCP Vishay Electro-Films Vishay Electro-Films •FEATURES Robust MOS construction • Allows multiple wire bonds. At the lowest Robust for MOS construction values, case A will accept 7 bonds B • Allows for multiple wire bonds. At and the case lowest will accept 15.A will accept 7 bonds and case B values, case • will Lowaccept D, high15. Q Excellent load • Low D, high Q life stability • Excellent load life stability APPLICATIONS •APPLICATIONS Hybrid assemblies Product may not be to scale The bar capacitorProduct is a MOS capacitor designed for hybrid may not be to scale assemblies requiring ultra high power rating with for miniature The bar capacitor is a MOS capacitor designed hybrid case size. requiring ultra high power rating with miniature assemblies • Hybrid Low pass LC, RC, or LRC lumped filter assemblies • RF onRC, DCor feeds Lowblocking pass LC, LRC lumped filter • Impedance matching RF blocking on DC feeds case size. • Impedance SiC or GaN matching high frequency / high power applications • SiC or GaN high frequency / high power applications WV (DC) VALUES AND TOLERANCES CAPACITOR MODEL WV (DC) VALUES AND TOLERANCES A Case Size CAPACITOR MODEL B UNIT 1204 A 2404 B UNIT Capacitance Case Size Values 51204 to 50 102404 to 100 pF Tolerance Capacitance Values 5 to5 50 10 to5 100 % pF DC Working Voltage Tolerance 100 5 100 5 V % DC Working Voltage 100 100 V STANDARD ELECTRICAL SPECIFICATIONS PARAMETER STANDARD ELECTRICAL SPECIFICATIONS Capacitance PARAMETERRange UNIT 5VALUE to 100 pF UNIT Absolute Tolerance, Capacitance Range 1 kHz (1) Down ±5 5 to to 100 % pF Absolute TCC, -55 ° 1tokHz 125(1)°C Tolerance, ± 50 Down to ± 5 ppm/°C % Operating Temperature Range Absolute TCC, -55 ° to 125 °C -55 ±to50 +150 °C ppm/°C Operating Temperature Voltage Range 100tomax. -55 +150 V °C Dissipation Factor, 1 MHz Operating Voltage 0.01 max. 100 max. V Absolute Value Stability, Dissipation Factor, 1 MHz1 kHz, 1000 h, 70 °C, 100 VDC ± 0.25 0.01 max. % Short Time Overload, 2 x1Rated Voltage, 25°C, °C,100 5 s VDC Absolute Value Stability, kHz, 1000 h, 70 ± 0.25 % Thermal Shock, MIL-STD-202, Short Time Overload, 2 x RatedMethod Voltage,107 25 F°C, 5 s ± 0.25 MoistureShock, Resistance, MIL-STD-202, Method Thermal MIL-STD-202, Method 107 F106* ± 0.25 High Temperature Exposure, 100 h, 150 °C 106* Moisture Resistance, MIL-STD-202, Method www.vishay.com ± 0.25 Low -65 °C, 45 min, High Temperature Temperature Operation, Exposure, 100 h, 150 °C 100 VDC ± 0.25 www.vishay.com Revision 22-Jan-15 VALUE MECHANICAL SPECIFICATIONS Low Temperature Operation, -65 °C, 45 min, 100 VDC Note (1) PARAMETER MECHANICAL SPECIFICATIONS See table “Case Size Value and Tolerance”. Note PARAMETER Material (1) Chip See Substrate table “Case Size Value % BRCP % BRCP Vishay Electro-Films % Vishay Electro-Films % ± 0.25 VALUE % VALUE Silicon and Tolerance”. Chip Substrate Material Dielectric Silicon Silicon dioxide Dielectric Top Termination Silicon dioxide Au 1 μm min. Top Termination Case Size AuSize 1 μm min.and Tolerance” See table “Case Value Case Size Passivation See table “Case Size Value and Tolerance” None Passivation Number of Pads None 1 Number of Pads (Epoxy only) Back Termination 1 TiW/Au Back Termination (Epoxy only) Revision: 22-Jan-15 TiW/Au Document Number: 61106 1 For technical questions, contact: [email protected] CASE22-Jan-15 SIZE VALUE AND TOLERANCE Revision: DocumentVMN-PT0443-1502 Number: 61106 1 2/2 PRODUCT SHEET THISSIZE DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS CASE VALUE AND TOLERANCE MAX.DOCUMENT OPERATING For technical questions, contact: [email protected] NOMINAL VALUE ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BEST TOLERANCE CASE TYPE A CASE TYPE B VOLTAGE THIS DOCUMENT DESCRIBED DOCUMENT MAX. OPERATING (pF)VALUE IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTSBEST (± %) HEREIN AND THIS NOMINAL TOLERANCE (V) TO SPECIFIC ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT CASE TYPE A CASE TYPE B VOLTAGE (pF) (± %) (V) 5 AT www.vishay.com/doc?91000 + 10 100 DISCLAIMERS, SET FORTH 5 7.5 + - 10 7 100