V I S H AY I N T E R T E C H N O L O G Y, I N C . Vishay Esta Power Capacitors PhMKDg ESTAdry D-Type Capacitor KEY BENEFITS • • • • • Smallest available height for 50 kvar units: 210 mm (+ 68 mm for terminals) Excellent heat dissipation Screw-on terminal with M10 bolts Resin filling provides thermal conductivity similar to that of oil-filled capacitors Aluminum case is welded and hermetically sealed APPLICATIONS • Recommended for power factor correction and filters in low-voltage applications ≤ 1000 V RESOURCES • Datasheet: PhMKDg - www.vishay.com/doc?13007 • For technical questions contact [email protected] A WORLD OF SOLUTIONS Product Sheet 1/2 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-PT9018-1602 www.vishay.com PhMKDg..., Triangular, LVAC ESTAdry D-Type, LVAC Power Capacitors V I SFEATURES H AY I N TVishay ERTEC H N O L O G Y, I N C . ESTA www.vishay.com • Self-healing technology ESTAdry D-Type, LVAC Power Capacitors • Over pressure tear-off fuse Vishay Esta Power Capacitors • Smallest available height for 50 kvar units: 210 mm FEATURES (+ 68 mm for terminals) PhMKDg..., Triangular, LVAC • Self-healing technology www.vishay.com ESTAdry D-Type, www.vishay.com PhMKDg • Excellent heat dissipation • Over pressure tear-off fuse Vishay ESTA • Screw-on terminal with M10 bolts • Smallest available height for 50 kvar units: 210 mm Resin filling provides thermal conductivity similar to that of LVAC Power Capacitors (+ 68 mm for terminals)• oil-filled capacitors • Excellent heat dissipation FEATURES Vishay ESTA • Aluminum case is welded and hermetically sealed • Screw-on terminal with M10 bolts • Self-healing technology • No paint required for OUTDOOR applications • Over pressure tear-off fuse • Resin filling provides thermal conductivity similar to that of • UL and cUL approved oil-filled • Smallest available height for 50 kvar units:capacitors 210 mm PhMKDg..., Triangular, LVAC ESTAdry D-Type Capacitor ESTAdry D-Type, LVAC Power Capacitors (+ 68 mm for terminals) • Aluminum case is welded and hermetically sealed APPLICATIONS FEATURES • Excellent heat dissipation • No paint required for OUTDOOR • Areas withapplications dust and moisture, which require a high degree • Self-healing technology • Screw-on terminal with M10 bolts • UL and cUL approved of protection and high creepage distances. Also for • Resin filling provides similar to that of • Over pressure tear-off fuse thermal conductivity oil-filled capacitors OUTDOOR applications • Smallest available height for 50 kvar units: 210 mm • Aluminum case is welded and hermetically sealed APPLICATIONS • Free-standing, fixed individual PFC (e.g. motors, lighting, (+ 68 mm for terminals) • No paint required for OUTDOOR applications • Areas with dust and moisture, which require a high degree transformers) • Excellent heat dissipation • UL and cUL approved of protection and high creepage distances. Also for • Automatic central PFC (e.g. group of loads) • Screw-on terminal with M10 bolts OUTDOOR applications APPLICATIONS • Harmonic trap (e.g. UPS, frequency drives, converter) • Resin filling provides thermal conductivity similar to that of • require Free-standing, fixed individual PFC (e.g. motors, lighting, Areas with dust and moisture, which a high degree oil-filled•capacitors • Pole - mounted PFC of protection and high creepage transformers) distances. Also for • AluminumOUTDOOR case is welded and hermetically sealed applications • Automatic central PFC (e.g. group of loads) • No paint• required for OUTDOOR applications Free-standing, fixed individual PFC (e.g. motors, lighting, • Harmonic trap (e.g. UPS, frequency drives, converter) QUICK REFERENCE DATA transformers) • UL and cUL approved • Automatic central PFC (e.g. group•ofPole loads)- mounted PFC Series PhMKDg…, triangular PhMKDgF…, triangular PhMKDg..., Triangular, LVAC www.vishay.com • Harmonic trap (e.g. UPS, frequency drives, converter) APPLICATIONS Vishay ESTA ESTAdry D-type, LVAC power capacitors - ESTAdry D-type, LVAC power capacitors - PhMKDg..., Triangular, LVAC Description 25 - INDOOR, IP00 dry - OUTDOOR, IP00 • Pole - mounted PFC • Areas with dust and moisture, which require a highdry degree QUICK REFERENCE DATA DIMENSIONS, INDOORand high creepage distances. Type Capacitors, fixed, low voltage Capacitors, fixed, low voltage of protection Also for www.vishay.com Vishay Series PhMKDgF…, triangularESTA OUTDOOR applications PhMKDg…, triangular QUICK REFERENCE DATA Technology MKP, metallized polypropylene MKP, metallized polypropylene film Required space for bulgingfilm ESTAdry D-type, LVAC power capacitors ESTAdry D-type, LVAC power capacitors Series PhMKDg…, triangular fixed individual PFC PhMKDgF…, triangular lighting, • Free-standing, (e.g. motors, Description D-TYPE PhMKDg, Voltage max. (V) 1000 1000 ESTAdry INDOOR dry - INDOOR, IP00 M10 dry - OUTDOOR, IP00 Screw bolt M10 ESTAdry D-type, LVAC power capacitors ESTAdry D-type, LVAC power capacitors transformers) Description Hexagonal nut M10 dry - INDOOR, min. IP00 (μF) DATACapacitance - OUTDOOR, IP00 3-phase D: 3 x 115.5, 3-phase Y: 3 x 140.1 3-phase Capacitors,dry fixed, low voltage Capacitors, fixed, low voltageD: 3 x 115.5, 3-phase Y: 3 x 140.1 • Automatic central PFC (e.g. group of loads) Capacitors, fixed, low voltage Capacitors, fixed, low voltage +2 68 - 2 Type TECHNICAL Type Spring washer wave Capacitance max. (μF) H±1 UICK REFERENCE DATA Output min. (kvar) 30 30 1.3 x In, 30 Output min. (kvar) 30 OvercurrentPhMKDg…, triangular 1.43 x In with 10 % overvoltages, 10 % over capacitance and harmonics included, PhMKDgF…, triangular 56.2 56.2 (in accordance with the above standards) continuous operation Output max. (kvar) 56.2 56.2 ESTAdry D-type, LVAC power capacitors ESTAdry D-type, LVAC capacitors www.vishay.com Please also referpower to “Terms and Definitions”. hay.com cription www.vishay.com www.vishay.com dry - INDOOR, IP00 IP00 - 5 dry % /-+OUTDOOR, 10 % in accordance with the standards Tolerance on capacitance ± 5 % as Vishay ESTA standard e Capacitors, fixed, low voltage Capacitors, fixed, low voltage DIMENSIONS, OUTDOOR OR 2.15 x Ucn, VAC, 2 s (routine test) Toothed lock washer DIMENSIONS, INDOORTest voltage, terminal / terminal DIMENSIONS, OUTDOOR hnology MKP, metallized polypropylene film MKP, metallized polypropylene M12film Hexagonal nut M12 Test voltage, terminal / casing 6000 VAC, 2 s (routine test) Required space for bulging Required space for bulging age max. (V) 1000 1000current In M12 Inrush current 300 times rated PhMKDg..., Triangular, LVAC Triangular, LVAC PhMKDg..., Output max. (kvar) Vishay ESTA +1 15.8 + 1 15.8 56.2 Max. 65 °C (measured on top of the can) 1 Cooling Naturally air-cooled For technical questions, Document Number: 13007 contact: [email protected] H ±1 Permissible relative humidity Maximum 95 % THIScontact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT For technical questions, [email protected] 78 SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTSARE DESCRIBED HEREIN AND Maximum allowed altitude 2000 m above seaTHIS levelDOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Mounting position Revision: 27-Jul-11 Mounting and grounding Vertical and1horizontal Document Number: 13007 For technical questions, contact: Threaded M12 stud [email protected] at the bottom of the container 15.8 + 1 Filling agent Terminals Toothed lock washer Polypropylene film, self-healing Hexagonal nut M12 Resin-filled (ESTAdry), non-PCB, non-toxic Δ Y +2 44 - 2 70 X: PhMKDg460.3.50,00-K 5345-44803-xx STYLE Drawing 6 PhMKDg525.3.50,00-K 5345-44824-xx Drawing 6 Terminals M8 DISCHARGE RESISTORS PhMKDg690.2.50,00-K 5345-44807-xx Terminals M10 PhMKDg760.2.50,00-K 5345-44808-xx Δ Y M12 mounting stud ORDERING INFORMATION Packing units 460 525 690 760 WEIGHT kg HEIGHT H mm 72.2 4.0 210 4.0 210 4.0 210 65.6 56.2 / 50 3 x 308.0 73.7 / 69.6 50 3 x 250.7 62.8 4.0 210 RECOMMENDED TORQUE Drawing 7 50 3 x 192.5 55.0 4.0 210 Drawing 7 6 Nm 50 3 x 334.3 Y 41.8 4.0 210 ACCESSORIES: SUPPORT FOR POLE AND WALL MOUNTING ACCESSORIES: SUPPORT FOR MOUNTING 10WALL Nm 50 3 x 275.5 Y 38.0POLE AND 4.0 210 Y 10 Nm 2/2 200 4 For technical questions, contact: [email protected] A-A VMN-PT9018-1602 1 piece per carton Notes THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND • Other voltage ratings, outputs, and frequencies on request. THIS DOCUMENT ARE(1)SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Version no. xx may differ as it respects small changes, e.g. on the label Revision: 27-Jul-11 A A 200 PhMKDg440.3.56,20-K 5345-44805-xx 440 / 415 RECOMMENDED TORQUES CURRENT A (50 Hz) 160 160 ARTICLE NO. (1) 78 1 160 78 Revision 27-Jan-16 78 M10 172 3-PHASE CAPACITORS IN TRAINGULAR CASING, INDOOR RATED RATED DocumentCAPACITANCE Number: 13007 VOLTAGE OUTPUT μF For technical questions, contact: [email protected] V kvar THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED400 HEREIN AND50 THIS DOCUMENT PhMKDg400.3.50,00-K 5345-44814-xx 3 x 331.6 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKDg440.3.50,00-K 5345-44804-xx 440 50 3 x 274.0 Product Sheet M10 Screw bolt M8 X 10 Slotted nut M10 Spring washer wave Hexagonal-nut M10 Screw bolt M10 X 172 70 X: 70 TYPE Δ X Threaded studs M10 172 172 70 M12 78 15.8 + 1 Dielectric Toothed lock washer M12 Hexagonal nut M12 +2 68 - 2 DISCHARGE RESISTORS +2 68 - 2 Safety All-phase overpressure tear-off fuse, self-healing THISfeatures DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT Drawing 6 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH Casing Aluminum can, welded topAT www.vishay.com/doc?91000 on: 27-Jul-11 ORS Document Number: 13007 H ±1 1 H±1 H±1 Revision: 27-Jul-11 Screw bolt M8x15 steel hot dip galvaniced 56.2 Permitted casing temperature Revision: 27-Jul-11 160 put max. (kvar) M12 Hexagonal nut M12 Toothed lock washer +2 44 - 2 +2 68 - 2 35 + 1 68 ± 2 51 ± 2 put min. (kvar) M10 Screw bolt M10 brass blank Screw bolt M10 Losses 0.4 to 3-phase 0.5 W/kvar 172Y: (without 3-phase D: Hexagonal 3 x 115.5,nut 3-phase Y:934 3 xsteel 140.1 3-phase D: 3W/kvar x 115.5, 3 x 140.1discharge resistors) M10 DIN hot dip galvaniced Hexagonal nut M10 Statistical lifeSpring expectancy > 130 000 operating h 70 (ESTAdry) washer wave B10 DIN 137 steelSpring hot dip galvaniced washer 3-phase D: 3 x 331.6, 3-phase Y: 3 x 334.3 3-phase D:wave 3 x 331.6, 3-phase Y: 3 x 334.3 Hexagonal nut M10 DIN 934 steel hot dip galvaniced Slotted nut IP00 M10 (terminal cover for higher protection class upon request), indoor Degree of protection Hexagon thin nut M10 DIN 439 A2 Screw bolt M8 x 15 Ambient temperature 30 category -25 / D (max. 30 55 °C), (-40 / D on request) pacitance min. (μF) pacitance max. (μF) 25 25 M10 PhMKDg..., Trian Vishay ESTA +2 44 - 2 es +1 Voltage max. (V) Capacitance min. (μF) 15.8 Technology +2 44 - 2 Slotted nut M10 60831-1 + 2, 3-phase EN 60831-1 UL810 LATEST Capacitance max. (μF) MKP, IEC D: 3-phase Y:EDITION 3 x 334.3 3-phase D: Technology metallized polypropylene film3+x2,331.6, MKP, metallized polypropylene film3 x 331.6, 3-phase Y: 3 x 334.3 STANDARDS Screw bolt M8 x 15 • Harmonic trap (e.g. converter) ULfrequency / ULCmetallized FILEdrives, # E97723 MKP, metallized polypropylene film UPS, MKP, polypropylene film Output min. (kvar) 30 30 Voltage max. (V) 1000 8 h daily) 1000 1000 • Pole - mounted PFC Ucn + 10 % (up to1000 Ucn + 15 % (up to 30 min daily) Overvoltages Output max. (kvar) 56.2 56.2 Capacitance min.3-phase (μF) D: 3 x 115.5, 3-phase Y: 3 3-phase 3 x 115.5, 3-phase Y: 3 x x 115.5, 3-phase Y: 3 x 140.1 U to 53-phase min, only times3-phase in the lifeD:of3 the capacitor) x 140.1 D: 3-phase 3 x(up 115.5, Y:140.1 3200 x 140.1 cn + 20D:% (in accordance with the above standards) Ucn + 30 % (up to 1 min, only 200 times in the life of the capacitor) Capacitance max.3-phase (μF) D: 3 x 331.6, 3-phase Y: 3 3-phase 3 x 331.6, 3-phase Y: 3 x 3-phase D: 3 x 331.6, 3-phase Y: 3 x 334.3 x 334.3 D: 3-phase D: 3 xrefer 331.6,to 3-phase Y:334.3 3and x 334.3 Please also “Terms Definitions”. www.vishay.com Document Number: 13007