V I S H AY I N T E R T E C H N O L O G Y, I N C . Capacitors - Very Low DC Leakage of 0.005 CV AND TEC I INNOVAT O L OGY TL3 N HN TANTALUM CAPACITORS O 19 62-2012 Solid Tantalum Surface-Mount Capacitors TANTAMOUNT®, Molded Case, Very Low DCL KEY BENEFITS • • • • • • • • • DC leakage at 0.005 CV Standard and low ESR options Thermal shock 100 % surge current tested (B,C, D, and E case sizes) Improved reliability of 0.5 % / 1000 hours Redundant tests on all cases Automotive grade available Voltage rating of 4 V to 50 V Capacitance values of 0.1 µF to 470 µF • Capacitance Tolerance: ± 10 %, ± 20 % • Halogen-free • Operating temperature range of - 55 °C to + 125 °C • Terminations: 100 % matte tin and tin/lead • Standard EIA 535BAAC case sizes (A through E) • Compliant to RoHS Directive 2011/65/EU • Moisture sensitivity level 1 APPLICATIONS • • • • • • • Battery-operated equipment Portable instrumentation Tire pressure monitoring systems Medical instruments Local power supplies Handheld instruments Battery backup supplies RESOURCES • Datasheet: TL3 - http://www.vishay.com/doc?40154 • For technical questions contact [email protected] Note * Pb containing terminations are not RoHS compliant, exemptions may apply PRODUCT SHEET 1/2 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components VMN-PT0308-1202 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FEATURES I INNOVAT TL3 O L OGY TANTALUM CAPACITORS HN • Terminations: 100 % matte tin and tin/lead • Molded case available in five case codes VIS H AY I NVolume” T E R T Eautomatic C H N O L O G Y, I N C . • Compatible with “High pick and place equipment AND TEC N • 100 % surge current tested (B, C, D and E case O sizes) • Improved reliability: 0.50 %/1000 h, 85 °C, rated voltage • Standard EIA 535BAAC case size (A through E) • DC leakage at 0.005 CV 19 62-2012 • Low ESR options • Mounting: Surface mount • Compliant to RoHS Directive 2002/95/EC • Halogen-free according to IEC 61249-2-21 definition • Moisture sensitivity level 1 Note * Pb containing terminations are not RoHS compliant, exemptions may apply PERFORMANCE/ELECTRICAL CHARACTERISTICS Capacitance Range: 0.1 µF to 470 µF Capacitance Tolerance: ± 10 %, ± 20 % Voltage Rating: 4 V to 50 V www.vishay.com/doc?40088 Operating Temperature: - 55 °C to + 125 °C (above 85 °C voltage derating is required) ORDERING INFORMATION TL3 D 107 K 010 C 0100 TYPE CASE CODE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 °C TERMINATION AND PACKAGING ESR See Ratings and Case Codes table. This is expressed in picofarads. The first two digits are significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). C = Matte tin/7" (178 mm) reels D = Matte tin/13" (330 mm) reels E = Tin/lead/7" (178 mm) reels F = Tin/lead/13" (330 mm) reels Maximum 100 kHz ESR in mΩ. See note below. Notes • We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. • The EIA and CECC standards for low ESR solid tantalum chip capacitors, allow delta ESR of 1.25 times the datasheet limit after mounting. • Dry pack is available per request, contact regional marketing. DIMENSIONS in inches [millimeters] L TW W H TH (MIN.) P CASE CODE A B C D E EIA SIZE L 0.126 ± 0.008 3216-18 [3.2 ± 0.20] 0.138 ± 0.008 3528-21 [3.5 ± 0.20] 0.236 ± 0.012 6032-28 [6.0 ± 0.30] 0.287 ± 0.012 7343-31 [7.3 ± 0.30] www.vishay.com 0.287 ± 0.012 7343-43 [7.3 ± 0.30] W 0.063 ± 0.008 [1.6 ± 0.20] 0.110 ± 0.008 [2.8 ± 0.20] 0.126 ± 0.012 [3.2 ± 0.30] 0.169 ± 0.012 [4.3 ± 0.30] 0.169 ± 0.012 [4.3 ± 0.30] H 0.063 ± 0.008 [1.6 ± 0.20] 0.075 ± 0.008 [1.9 ± 0.20] 0.098 ± 0.012 [2.5 ± 0.30] 0.110 ± 0.012 [2.8 ± 0.30] 0.157 ± 0.012 [4.0 ± 0.30] P 0.031 ± 0.012 [0.80 ± 0.30] 0.031 ± 0.012 [0.80 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] TW 0.047 ± 0.004 [1.2 ± 0.10] 0.087 ± 0.004 [2.2 ± 0.10] 0.087 ± 0.004 [2.2 ± 0.10] 0.094 ± 0.004 [2.4 ± 0.10] 0.094 ± 0.004 [2.4 ± 0.10] TH (MIN.) 0.028 [0.70] 0.028 [0.70] 0.039 [1.0] 0.039 [1.0] 0.039 [1.0] TL3 Vishay Sprague Revision: 01-Feb-12 Document Number: 40154 1 For technical questions, contact: [email protected] “A” CASE VOLTAGE CODE THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT Indicates Very Low DCL Series ARE SUBJECT TO SPECIFIC VOLTS DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CODE Indicates Very Low DCL Series MARKING 4.0 Capacitance Code, pF V 104D Polarity Band (+) Voltage Code A Case Revision 01-Feb-12 Capacitors - Very Low DC Leakage of 0.005 CV Solid Tantalum Surface Mount Capacitors TANTAMOUNT®, Molded Case, Very Low DCL 6.3 J 10 A 16 C 20 D 25 E 35 V 50 T Voltage Capacitance μF G Polarity Band (+) 22 D10 XX 2 Date Code Vishay Sprague Logo B, C, D, E Cases Marking Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” case capacitors use a letter code for the voltage and EIA capacitance code. The Vishay Sprague® trademark is included if space permits. Capacitors rated at 6.3 V are marked 6 V. A manufacturing date code is marked on all capacitors. Call the factory for further explanation. STANDARD RATINGS PRODUCT SHEET 2/2 VMN-PT0308-1202 MAX. RIPPLE MAX. DC MAX. DF MAX. ESR 100 kHz LEAKAGE AT + 25 °C AT + 25 °C CASE CODE PART NUMBER IRMS AT + 25 °C 120 Hz 100 kHz THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO (A) (μA) (%) () CAPACITANCE (μF) SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 2.2 A 4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C TL3A225(1)004(2)7600 0.25 6 7.600 0.10