MJW25

®
MJW25 SERIES
DC/DC CONVERTER 25W, Highest Power Density
FEATURES
►Smallest Encapsulated 25W Converter
►Ultra-compact 1" X 1" Package
►Wide 2:1 Input Voltage Range
►Fully Regulated Output Voltage
►Excellent Efficiency up to 90%
►I/O Isolation 1500 VDC
►Operating Ambient Temp. Range -40°C to +80°C
►No Min. Load Requirement
►Overload/Voltage and Short Circuit Protection
►Remote On/Off Control, Output Voltage Trim
►Shielded Metal Case with Insulated Baseplate
►UL/cUL/IEC/EN 60950-1 Safety Approval
PRODUCT OVERVIEW
The MINMAX MJW25 series is the latest range of a new generation of high performance dc-dc converter modules with very high power density.
The product offers fully 25W in a shielded metal package with dimensions of just 1.0"x1.0"x0.4". All models provide wide 2:1 input range and tightly
regulated output voltage.By state-of-the-art circuit topology a very high efficiency up to 90% could be achieved allowing an operating temperature
range of -40°C to +80°C (with derating).
These converters are qualified for demanding applications in battery operated equipment,instrumentation,data communication,industrial and many other
space critical applications.
Model Selection Guide
Model
Number
Input
Voltage
(Range)
Output
Voltage
Output Current
Input Current
Max.
@Max. Load
@No Load
VDC
VDC
mA
mA(typ.)
mA(typ.)
MJW25-12S033
3.3
6000
1900
MJW25-12S05
5
5000
2340
12
2090
15
MJW25-12D12
Reflected
Ripple
Current
Efficiency
(typ.)
@Max. Load
VDC
μF
%
75
3.9
10300
87
85
6.2
6800
89
2350
80
15
1200
89
1670
2350
80
18
750
89
±12
±1040
2340
75
±15
680#
89
MJW25-12D15
±15
±840
2360
75
±18
380#
89
MJW25-24S033
3.3
6000
940
55
3.9
10300
88
MJW25-24S05
5
5000
1160
60
6.2
6800
90
12
2090
1160
55
15
1200
90
15
1670
1160
55
18
750
90
MJW25-24D12
±12
±1040
1170
50
±15
680#
89
MJW25-24D15
±15
±840
1180
50
±18
380#
89
MJW25-48S033
3.3
6000
470
35
3.9
10300
88
MJW25-48S05
5
5000
580
40
6.2
6800
90
12
2090
580
35
15
1200
90
15
1670
580
35
18
750
90
MJW25-48D12
±12
±1040
585
40
±15
680#
89
MJW25-48D15
±15
±840
590
40
±18
380#
89
MJW25-12S12
MJW25-12S15
MJW25-24S12
MJW25-24S15
MJW25-48S12
MJW25-48S15
12
(9 ~ 18)
24
(18 ~ 36)
48
(36 ~ 75)
mA (typ.)
Over
Max. capacitive
Voltage
Load
Protection
80
50
30
# For each output
E-mail:[email protected]
2016/06/16
REV:5
Tel:886-6-2923150
Page 1 of 10
MJW25 SERIES
®
DC/DC CONVERTER 25W, Highest Power Density
Input Specifications
Parameter
Input Surge Voltage (100ms max.)
Model
Min.
Typ.
Max.
12V Input Models
-0.7
---
25
24V Input Models
-0.7
---
50
48V Input Models
-0.7
------None
---
100
9
18
36
12V Input Models
24V Input Models
48V Input Models
Start-up Threshold Voltage
Input Polarity Protection
Power Up
Remote On/Off
Start-up Time
Nominal Vin and Constant Resistive Load
Input Filter
-----
All Models
-------
--30
--30
Internal LC Type
Unit
VDC
ms
ms
Remote On/Off Control
Parameter
Converter On
Converter Off
Control Input Current (on)
Control Input Current (off)
Control Common
Standby Input Current
Conditions
Vctrl = 5.0V
Vctrl = 0V
Supply Off & Nominal Vin
Min.
Typ.
3.5V ~ 12V or Open Circuit
0V ~ 1.2V or Short Circuit
--------Referenced to Negative Input
--3
Max.
Unit
0.5
-0.5
mA
mA
---
mA
Output Specifications
Parameter
Output Voltage Setting Accuracy
Conditions
Min.
---
Typ.
---
Max.
±1.0
Unit
%Vnom.
Dual Output, Balanced Loads
-----------
-----------
±2.0
±0.2
±0.2
±1.0
±5.0
%
%
%
%
%
----250
100
150
---
mV P-P
mV P-P
μsec
±5
±0.02
±10
%
%/℃
%
Max.
---
Unit
VDC
----------2000
285
--MIL-HDBK-217F@25℃, Ground Benign
313,300
UL/cUL 60950-1 recognition(CSA certificate), IEC/EN 60950-1(CB-report)
VDC
MΩ
pF
KHz
Hours
Output Voltage Balance
Line Regulation
Vin=Min. to Max. @Full Load
Single Output
Io=0% to 100%
Dual Output
Asymmetrical load 25% / 100% FL
Load Regulation
Cross Regulation (Dual)
No minimum Load Requirement
Minimum Load
Ripple & Noise
0-20 MHz Bandwidth
Transient Recovery Time
Transient Response Deviation
Temperature Coefficient
Trim Up / Down Range (See Page 8)
Over Load Protection
Short Circuit Protection
3.3V & 5V Models
12V , 15V & Dual Models
25% Load Step Change
-------
--±3
----% of Nominal Output Voltage
----Current Limitation at 150% typ. of Iout max., Hiccup
Hiccup Mode 0.7Hz typ, Automatic Recovery
General Specifications
Parameter
I/O Isolation Voltage
I/O Isolation Resistance
I/O Isolation Capacitance
Switching Frequency
MTBF(calculated)
Safety Approvals
E-mail:[email protected]
2016/06/16
REV:5
Conditions
60 Seconds
Min.
1500
1 Second
500 VDC
100KHz, 1V
1800
1000
-----
Tel:886-6-2923150
Page 2 of 10
Typ.
---
MJW25 SERIES
®
DC/DC CONVERTER 25W, Highest Power Density
Environmental Specifications
Parameter
Conditions/Model
Operating Ambient Temperature Range
Natural Convection (7)
Nominal Vin, Load 100% Inom.
(for Power Derating see relative Derating Curves)
Thermal Impedance
Min.
MJW25-24S033, MJW25-48S033
MJW25-24S05, MJW25-24S12
MJW25-24S15, MJW25-48S05
MJW25-48S12, MJW25-48S15
MJW25-12S033
MJW25-12S05, MJW25-12S12,MJW25-12S15
MJW25-12D12, MJW25-12D15
MJW25-24D12, MJW25-24D15
MJW25-48D12, MJW25-48D15
Natural Convection without Heatsink
Natural Convection with Heatsink
100LFM Convection without Heatsink
100LFM Convection with Heatsink
200LFM Convection without Heatsink
200LFM Convection with Heatsink
400LFM Convection without Heatsink
400LFM Convection with Heatsink
Case Temperature
Storage Temperature Range
Humidity (non condensing)
Cooling
RFI
Lead Temperature (1.5mm from case for 10Sec.)
Max.
without Heatsink
with Heatsink
57
65
-40
56
64
53
61
50
59
17.6
14.8
13.6
8.5
11.8
6.5
8.8
4.3
---50
--Natural Convection
Six-Sided Shielded, Metal Case
---
Unit
℃
----------------+105
+125
95
℃/W
℃/W
℃/W
℃/W
℃/W
℃/W
℃/W
℃/W
℃
℃
% rel. H
260
℃
EMC Specifications
Parameter
Standards & Level
Performance
EMI
Conduction
EN55022, FCC part 15
Class A, Class B
EMS
EN55024
ESD
Radiated immunity
Fast transient (6)
Surge (6)
Conducted immunity
EN61000-4-2 Air ± 8kV , Contact ±6kV
EN61000-4-3 10V/m
EN61000-4-4 ±2kV
EN61000-4-5 ±1kV
EN61000-4-6 10Vrms
A
A
A
A
A
External Filter meets Conducted EMI EN55022 class A, class B; FCC part 15 level A, level B
Class
Class A
Class B
Model
C1
C2
C3
C4&C5
L1
MJW25-12XXX
None
3.3μF/25V 1210 MLCC
None
None
1μH
MJW25-24XXX
None
3.3μF/50V 1210 MLCC
None
None
2.2μH
MJW25-48XXX
None
3.3μF/100V 1210 MLCC
None
None
4.7μH
MJW25-12XXX
3.3μF/25V 1210 MLCC
3.3μF/25V 1210 MLCC
3.3μF/25V 1210 MLCC
1800 pF/2KV 1206 MLCC
1μH
MJW25-24XXX
3.3μF/50V 1210 MLCC
3.3μF/50V 1210 MLCC
3.3μF/50V 1210 MLCC
1800 pF/2KV 1206 MLCC
2.2μH
MJW25-48XXX
3.3μF/100V 1210 MLCC
3.3μF/100V 1210 MLCC
3.3μF/100V 1210 MLCC
1800 pF/2KV 1206 MLCC
4.7μH
E-mail:[email protected]
2016/06/16
REV:5
Tel:886-6-2923150
Page 3 of 10
MJW25 SERIES
®
DC/DC CONVERTER 25W, Highest Power Density
Power Derating Curve
100
100
Natural
Convection
20LFM
100LFM
60
200LFM
400LFM
40
Natural
Convection
20LFM
80
Output Power (%)
Output Power (%)
80
20
100LFM
60
200LFM
400LFM
40
20
0
0
~
-40
0
20
40
60
80
100 110
~
-40
0
20
Ambient Temperature C
MJW25-24S033, MJW25-48S033
Derating Curve without Heatsink
Natural
Convection
20LFM
100 110
100LFM
60
200LFM
400LFM
40
80
100 110
Natural
Convection
20LFM
80
Output Power (%)
Output Power (%)
80
100
80
20
100LFM
60
200LFM
400LFM
40
20
0
0
~
-40
0
20
40
60
80
100 110
~
-40
0
20
Ambient Temperature C
40
60
Ambient Temperature C
MJW25-24S05,MJW25-24S12,MJW25-24S15,MJW25-48S05
MJW25-48S12,MJW25-48S15 Derating Curve without Heatsink
MJW25-24S05,MJW25-24S12,MJW25-24S15,MJW25-48S05
MJW25-48S12,MJW25-48S15 Derating Curve with Heatsink
100
100
Natural
Convection
20LFM
100LFM
60
200LFM
400LFM
40
Natural
Convection
20LFM
80
Output Power (%)
80
Output Power (%)
60
MJW25-24S033, MJW25-48S033
Derating Curve with Heatsink
100
20
100LFM
60
200LFM
400LFM
40
20
0
0
~
-40
0
20
40
60
80
100 110
~
-40
0
20
Ambient Temperature C
60
80
100 110
MJW25-12S033 Derating Curve with Heatsink
100
100
Natural
Convection
20LFM
100LFM
60
200LFM
400LFM
40
Natural
Convection
20LFM
80
Output Power (%)
80
20
100LFM
60
200LFM
400LFM
40
20
0
0
~
-40
0
20
40
60
80
100 110
Ambient Temperature C
MJW25-12S05, MJW25-12S12, MJW25-12S15, MJW25-12D12
MJW25-12D15, MJW25-24D12, MJW25-24D15,MJW25-48D12,MJW25-48D15
Derating Curve without Heatsink
E-mail:[email protected]
2016/06/16
40
Ambient Temperature C
MJW25-12S033 Derating Curve without Heatsink
Output Power (%)
40
Ambient Temperature C
REV:5
Tel:886-6-2923150
Page 4 of 10
~
-40
0
20
40
60
80
100 110
Ambient Temperature C
MJW25-12S05, MJW25-12S12, MJW25-12S15, MJW25-12D12
MJW25-12D15, MJW25-24D12, MJW25-24D15,MJW25-48D12,MJW25-48D15
Derating Curve with Heatsink
MJW25 SERIES
®
DC/DC CONVERTER 25W, Highest Power Density
100
100
90
90
Efficiency(%)
Efficiency(%)
Efficiency Curve @25℃
80
70
60
80
70
60
9V
50
9V
50
12V
18V
40
10
20
30
40
50
60
70
80
90
12V
18V
40
100
10
20
30
40
% of Full Load
60
70
80
90
100
% of Full Load
MJW25-12S033 Efficiency vs Load Current
MJW25-12S05 Efficiency vs Load Current
100
100
90
90
Efficiency(%)
Efficiency(%)
50
80
70
60
80
70
60
9V
50
9V
50
12V
18V
40
10
20
30
40
50
60
70
80
90
12V
18V
40
100
10
20
30
40
% of Full Load
60
70
80
90
100
% of Full Load
MJW25-12S12 Efficiency vs Load Current
MJW25-12S15 Efficiency vs Load Current
100
100
90
90
Efficiency(%)
Efficiency(%)
50
80
70
60
80
70
60
9V
50
9V
50
12V
18V
40
10
20
30
40
50
60
70
80
90
12V
18V
40
100
10
20
30
40
% of Full Load
60
70
80
90
100
% of Full Load
MJW25-12D12 Efficiency vs Load Current
MJW25-12D15 Efficiency vs Load Current
100
100
90
90
Efficiency(%)
Efficiency(%)
50
80
70
60
80
70
60
18V
50
24V
36V
40
10
20
30
40
50
60
70
80
90
% of Full Load
MJW25-24S033 Efficiency vs Load Current
E-mail:[email protected]
2016/06/16
REV:5
Tel:886-6-2923150
Page 5 of 10
100
18V
50
24V
36V
40
10
20
30
40
50
60
70
80
90
% of Full Load
MJW25-24S05 Efficiency vs Load Current
100
MJW25 SERIES
®
DC/DC CONVERTER 25W, Highest Power Density
100
100
90
90
Efficiency(%)
Efficiency(%)
Efficiency Curve @25℃
80
70
60
80
70
60
18V
50
18V
50
24V
36V
40
10
20
30
40
50
60
70
80
90
24V
36V
40
100
10
20
30
40
% of Full Load
60
70
80
90
100
% of Full Load
MJW25-24S12 Efficiency vs Load Current
MJW25-24S15 Efficiency vs Load Current
100
100
90
90
Efficiency(%)
Efficiency(%)
50
80
70
60
80
70
60
18V
50
18V
50
24V
36V
40
10
20
30
40
50
60
70
80
90
24V
36V
40
100
10
20
30
40
% of Full Load
60
70
80
90
100
% of Full Load
MJW25-24D12 Efficiency vs Load Current
MJW25-24D15 Efficiency vs Load Current
100
100
90
90
Efficiency(%)
Efficiency(%)
50
80
70
60
80
70
60
36V
50
36V
50
48V
75V
40
10
20
30
40
50
60
70
80
90
48V
75V
40
100
10
20
30
40
% of Full Load
60
70
80
90
100
% of Full Load
MJW25-48S033 Efficiency vs Load Current
MJW25-48S05 Efficiency vs Load Current
100
100
90
90
Efficiency(%)
Efficiency(%)
50
80
70
60
80
70
60
36V
50
48V
75V
40
10
20
30
40
50
60
70
80
90
% of Full Load
MJW25-48S12 Efficiency vs Load Current
E-mail:[email protected]
2016/06/16
REV:5
Tel:886-6-2923150
Page 6 of 10
100
36V
50
48V
75V
40
10
20
30
40
50
60
70
80
90
% of Full Load
MJW25-48S15 Efficiency vs Load Current
100
MJW25 SERIES
®
DC/DC CONVERTER 25W, Highest Power Density
100
100
90
90
Efficiency(%)
Efficiency(%)
Efficiency Curve @25℃
80
70
60
80
70
60
36V
50
48V
75V
40
10
20
30
40
50
60
70
80
90
100
36V
50
48V
75V
40
10
20
30
40
% of Full Load
50
60
70
80
90
100
% of Full Load
MJW25-48D12 Efficiency vs Load Current
MJW25-48D15 Efficiency vs Load Current
Notes
1
2
3
4
5
6
7
8
Specifications typical at Ta=+25℃, resistive load, nominal input voltage, rated output current unless otherwise noted.
Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%.
Ripple & Noise measurement with a 1μF MLCC and a 10μF Tantalum Capacitor.
We recommend to protect the converter by a slow blow fuse in the input supply line.
Other input and output voltage may be available, please contact factory.
To meet EN61000-4-4 & EN61000-4-5 an external capacitor across the input pins is required.Suggested capacitor : 220μF/100V.
That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
Pin Connections
2.54
[0.10]
25.4 [1.00]
10.16
[0.40]
10.16
[0.40]
4
Bottom View
1
2
6
1.00
[0.04]
20.3 [0.80]
5
25.4 [1.00]
3
6.0
10.16 0.5
[0.24] [0.40 0.02]
Pin
Single Output
Dual Output
1
+Vin
+Vin
2
-Vin
-Vin
3
+Vout
+Vout
4
Trim
Common
5
-Vout
-Vout
6
Remote On/Off
Remote On/Off
►All dimensions in mm
►Tolerance: X.X±0.25
5.08
[0.20]
7.62
[0.30]
2.54
[0.10]
Physical Characteristics
Case Size
:
25.4x25.4x10.16mm (1.0x1.0x0.4 inches)
Case Material
:
Aluminium Alloy, Black Anodized Coating
Base Material
:
FR4 PCB (flammability to UL 94V-0 rated)
Pin Material
:
Copper Alloy with Gold Plate Over Nickel Subplate
Weight
:
16.5g
E-mail:[email protected]
2016/06/16
REV:5
Tel:886-6-2923150
Page 7 of 10
(inches)
(X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pin
diameter  1.0 ±0.05 (0.04±0.002)
MJW25 SERIES
®
DC/DC CONVERTER 25W, Highest Power Density
Heatsink (Option –HS)
Mechanical Dimensions
16.3 [0.64]
Heatsink Material: Aluminum
Finish: Anodic treatment (black)
Weight: 2g
17.46
[0.69] Max.
►The advantages of adding a
31.0 [1.22] Max.
heatsink are:
1. To improve heat dissipation and increase the
stability and reliability of the DC/DC converters at
high operating temperatures.
Heat-Sink
Thermal Pad
Clamp
Converter
2. To increase operating temperature of the DC/DC
converter, please refer to Derating Curve.
External Output Trimming
Output can be externally trimmed by using the method shown below
Rd
Ru
3
4
5
3
2
1
6
2
6
Trim Down
Trim Up
MJW25-XXS033 Trim Table
Trim down
1
Vout=
Vox0.99
Rd=
72.61
5
MJW25 Module
Bottom View
MJW25 Module
Bottom View
1
4
2
Vox0.98
32.55
3
Vox0.97
19.20
4
Vox0.96
12.52
5
Vox0.95
8.51
6
Vox0.94
5.84
7
Vox0.93
3.94
8
Vox0.92
2.51
9
Vox0.91
1.39
10
Vox0.90
0.50
%
Volts
KOhms
Trim up
1
Vout=
Vox1.01
Ru=
60.84
MJW25-XXS05 Trim Table
Trim down
1
Vout=
Vox0.99
Rd=
138.88
2
Vox1.02
27.40
3
Vox1.03
16.25
4
Vox1.04
10.68
5
Vox1.05
7.34
6
Vox1.06
5.11
7
Vox1.07
3.51
8
Vox1.08
2.32
9
Vox1.09
1.39
10
Vox1.10
0.65
%
Volts
KOhms
2
Vox0.98
62.41
3
Vox0.97
36.92
4
Vox0.96
24.18
5
Vox0.95
16.53
6
Vox0.94
11.44
7
Vox0.93
7.79
8
Vox0.92
5.06
9
Vox0.91
2.94
10
Vox0.90
1.24
%
Volts
KOhms
Trim up
1
Vout=
Vox1.01
Ru=
106.87
MJW25-XXS12 Trim Table
Trim down
1
Vout=
Vox0.99
Rd=
413.55
2
Vox1.02
47.76
3
Vox1.03
28.06
4
Vox1.04
18.21
5
Vox1.05
12.30
6
Vox1.06
8.36
7
Vox1.07
5.55
8
Vox1.08
3.44
9
Vox1.09
1.79
10
Vox1.10
0.48
%
Volts
KOhms
2
Vox0.98
184.55
3
Vox0.97
108.22
4
Vox0.96
70.05
5
Vox0.95
47.15
6
Vox0.94
31.88
7
Vox0.93
20.98
8
Vox0.92
12.80
9
Vox0.91
6.44
10
Vox0.90
1.35
%
Volts
KOhms
Trim up
1
Vout=
Vox1.01
Ru=
351.00
MJW25-XXS15 Trim Table
Trim down
1
Vout=
Vox0.99
Rd=
530.73
2
Vox1.02
157.50
3
Vox1.03
93.00
4
Vox1.04
60.75
5
Vox1.05
41.40
6
Vox1.06
28.50
7
Vox1.07
19.29
8
Vox1.08
12.37
9
Vox1.09
7.00
10
Vox1.10
2.70
%
Volts
KOhms
2
Vox0.98
238.61
3
Vox0.97
141.24
4
Vox0.96
92.56
5
Vox0.95
63.35
6
Vox0.94
43.87
7
Vox0.93
29.96
8
Vox0.92
19.53
9
Vox0.91
11.41
10
Vox0.90
4.92
%
Volts
KOhms
2
Vox1.02
189.89
3
Vox1.03
112.26
4
Vox1.04
73.44
5
Vox1.05
50.15
6
Vox1.06
34.63
7
Vox1.07
23.54
8
Vox1.08
15.22
9
Vox1.09
8.75
10
Vox1.10
3.58
%
Volts
KOhms
Trim up
Vout=
Ru=
1
Vox1.01
422.77
E-mail:[email protected]
2016/06/16
REV:5
Tel:886-6-2923150
Page 8 of 10
MJW25 SERIES
®
DC/DC CONVERTER 25W, Highest Power Density
Order Code Table
Standard
With heatsink
MJW25-12S033
MJW25-12S033-HS
MJW25-12S05
MJW25-12S05-HS
MJW25-12S12
MJW25-12S12-HS
MJW25-12S15
MJW25-12S15-HS
MJW25-12D12
MJW25-12D12-HS
MJW25-12D15
MJW25-12D15-HS
MJW25-24S033
MJW25-24S033-HS
MJW25-24S05
MJW25-24S05-HS
MJW25-24S12
MJW25-24S12-HS
MJW25-24S15
MJW25-24S15-HS
MJW25-24D12
MJW25-24D12-HS
MJW25-24D15
MJW25-24D15-HS
MJW25-48S033
MJW25-48S033-HS
MJW25-48S05
MJW25-48S05-HS
MJW25-48S12
MJW25-48S12-HS
MJW25-48S15
MJW25-48S15-HS
MJW25-48D12
MJW25-48D12-HS
MJW25-48D15
MJW25-48D15-HS
E-mail:[email protected]
2016/06/16
REV:5
Tel:886-6-2923150
Page 9 of 10
®
MJW25 SERIES
DC/DC CONVERTER 25W, Highest Power Density
Test Setup
Input Reflected-Ripple Current Test Setup
Input reflected-ripple current is measured with a inductor Lin (4.7μH) and Cin (220μF, ESR < 1.0Ω at 100 KHz) to simulate source impedance. Capacitor Cin, offsets
possible battery impedance. Current ripple is measured at the input terminals of the module, measurement bandwidth is 0-500 KHz.
To Oscilloscope
+
+
Battery
+Vin
Lin
Current
Probe
Cin
+Out
DC / DC
Converter
-Vin
Load
-Out
Peak-to-Peak Output Noise Measurement Test
Use a 1μF ceramic capacitor and a 10μF tantalum capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20 MHz.
Position the load between 50 mm and 75 mm from the DC/DC Converter.
+Vin
+Out
Copper Strip
Single Output
DC / DC
Converter
-Vin
Cout
-Out
Resistive
Load
Scope
Copper Strip
+Vin
+Out
Copper Strip
Dual Output
DC / DC
Converter
Com.
Copper Strip
-Vin
-Out
Scope
Cout
Resistive
Load
Cout
Scope
Copper Strip
Technical Notes
Remote On/Off
Positive logic remote on/off turns the module on during a logic high voltage on the remote on/off pin, and off during a logic low. To turn the power module on and off,
the user must supply a switch to control the voltage between the on/off terminal and the -Vin terminal. The switch can be an open collector or equivalent. A logic low is
0V to 1.2V. A logic high is 3.5V to 12V. The maximum sink current at the on/off terminal (Pin 6) during a logic low is -500uA. The maximum allowable leakage current
of a switch connected to the on/off terminal (Pin 6) at logic high (3.5V to 12V) is 10mA.
Overload Protection
To provide hiccup mode protection in a fault (output overload) condition, the unit is equipped with internal current limiting circuitry and can endure overload for an
unlimited duration.
Overvoltage Protection
The output overvoltage clamp consists of control circuitry, which is independent of the primary regulation loop, that monitors the voltage on the output terminals.
The control loop of the clamp has a higher voltage set point than the primary loop. This provides a redundant voltage control that reduces the risk of output
overvoltage. The OVP level can be found in the output data.
Input Source Impedance
The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module.
In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup.
Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR < 1.0
Ω at 100 KHz) capacitor of a 10μF for the 24V and 48V devices.
+
DC Power
Source
+Vin
+
+Out
DC / DC
Converter
Load
Cin
-
-Vin
-Out
Output Ripple Reduction
A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is
recommended to use 4.7μF capacitors at the output.
+
+Vin
DC Power
Source
-
+Out
Single Output
DC / DC
Converter
-Vin
+
Cout
Load
-Out
+Vin
DC Power
Source
-
+Out
Dual Output
DC / DC Com.
Converter
-Vin
-Out
Cout
Load
Load
Cout
Maximum Capacitive Load
The MJW25 series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up,
affecting the ramp-up and the startup time. The maximum capacitance can be found in the data sheet.
Thermal Considerations
Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the
maximum temperature rating of the components inside the power module, the case temperature must be kept below 105℃. The derating curves are determined from
measurements obtained in a test setup.
Position of air velocity
probe and thermocouple
15mm / 0.6in
50mm / 2in
Air Flow
DUT
18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan
Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected]
Minmax Technology Co., Ltd.
2016/06/16
REV:5
Page 10 of 10