SIDACtor ® Protection Thyristors High Surge Current Protection SIDACtor® Primary Protection Series - Modified TO-220 RoHS Pb e3 Description The SIDACtor® Primary Protection Series Modified TO-220 thyristors are components designed for use in primary protection applications. The series provides a single port overvoltage solution that enables applications to comply with GR-974 and a range of other global regulatory standards. Please contact Littelfuse to discuss your particular application and regulatory requirements. Features and Benefits • High holding current options available • Failsafe option available • Low voltage overshoot • Agency Approvals Agency • Single-port protection • Modified TO-220 Package Low on-state voltage • Lead forms available • Does not degrade surge capability after multiple surge events within limit. • • RoHS Compliant and Halogen-Free • Fails short circuit Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD609A.01) Agency File Number E133083 Pinout Designation PIN 1 PIN 2 PIN 3 Applicable Global Standards Schematic Symbol 1 (T) 3 when surged in excess of ratings 2 (G) • GR-974 • UL 497 • ITU K.28 (R) Electrical Characteristics Part Number Marking VS VDRM VS VT VDRM @lDRM=5µA @100V/µs @lDRM=5µA @100V/µs @IT=2.2 A V min V max V min Pins 1-2, 3-2 P0602ACLxx P1402ACLxx P1602ACLxx P2202ACLxx P2702ACLxx P3002ACLxx P3602ACLxx P4202ACLxx P4802ACLxx P6002ACLxx P0602AC P1402AC P1602AC P2202AC P2702AC P3002AC P3602AC P4202AC P4802AC P6002AC 25 58 65 90 120 140 170 190 220 275 40 77 95 130 160 180 220 250 300 350 V max Pins 1-3 50 116 130 180 240 280 340 380 440 550 80 154 190 260 320 360 440 500 600 700 V max IH* IS IT Pins 1-2, 3-2 mA min mA A max max 4 4 4 4 4 4 4 4 4 4 50 150 150 150 150 150 150 150 150 150 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 Capacitance @1MHz, 2V bias pF min pF max See Capacitance Values Table Notes: *Higher holding current available by special order. Contact Littelfuse for additional information. - xx Part Number Suffix: ‘RP’ (Reel pack), Blank (Bulk pack), ‘60’ (Type 60 lead form bulk pack), - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). ‘FS1’ (Failsafe option bulk pack). Refer to Part Numbering section for additional details. - Devices are bi-directional (unless otherwise noted). © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/06/16 SIDACtor ® Protection Thyristors High Surge Current Protection Surge Ratings Series IPP 0.2x310 1 0.5x700 2 2x10 1 2x10 2 8x20 1 1.2x50 2 10x160 1 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 C A min 50 A min 500 A min 400 A min 200 A min 150 A min 200 A min 175 A min 100 A min 200 ITSM 50/60 Hz di/dt A min 50 A/µs min 500 Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The device must initially be in thermal equilibrium with -40°C < TJ < +150°C 1 Current waveform in µs 2 Voltage waveform in µs Thermal Considerations Capacitance Values Part Number Pin 1-2 / 3-2 Tip-Ground, Ring-Ground pF min 35 105 95 75 70 65 65 60 60 55 P0602ACLxx P1402ACLxx P1602ACLxx P2202ACLxx P2702ACLxx P3002ACLxx P3602ACLxx P4202ACLxx P4802ACLxx P6002ACLxx pF max 65 155 145 115 105 95 90 85 85 80 Pin 1-3 Tip-Ring pF min 20 60 50 40 40 35 35 35 30 30 pF max 40 90 85 65 60 55 50 50 50 45 Package Symbol Parameter Value Unit Modified TO-220 TJ Operating Junction Temperature Range -40 to +150 °C TS Storage Temperature Range -65 to +150 °C R0JA Thermal Resistance: Junction to Ambient 60 °C/W PIN 1 PIN 2 PIN 3 V-I Characteristics +I Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. IT Peak Value 100 Waveform = tr x td IDRM -V +V VDRM VT 50 Half Value 0 0 td tr VS -I t – Time (µs) Normalized VS Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature 2.0 14 12 10 IH 8 6 25 °C 4 2 Ratio of Percent of VS Change – % IS IH tr = rise time to peak value td = decay time to half value IH (TC = 25ºC) IPP – Peak Pulse Current – %IPP tr x td Pulse Waveform 0 -4 -6 1.8 1.6 1.4 1.0 0.8 0.6 0.4 -8 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C 25°C 1.2 -40 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - ºC © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/06/16 SIDACtor ® Protection Thyristors High Surge Current Protection Soldering Parameters Pb-Free assembly (see Fig. 1) +150°C +200°C 60-180 secs. - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) +217°C - Temperature (tL) 60-150 secs. Peak Temp (TP) +260(+0/-5)°C Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed +260°C Physical Specifications TP tP Critical Zone TL to TP Ramp-up TL TS(max) tL Ramp-down Preheat TS(min) tS 25 time to peak temperature (t 25ºC to peak) Time Environmental Specifications Lead Material Copper Alloy Terminal Finish 100% Matte-Tin Plated Body Material Figure 1 Temperature Reflow Condition UL Recognized epoxy meeting flammability classification V-0 Part Numbering P xxx 2 A C L xx PACKING OPTIONS TYPE Blank: Bulk RP: Reel Pack 60: Type 60 Lead Form (for type 60 orders, contact factory). P = SIDACtor MEDIAN VOLTAGE High Temp Voltage Blocking 80% Rated VDRM (VAC Peak ) +125°C or +150°C, 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Temp Cycling -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/ JEDEC, JESD22-A-101 High Temp Storage +150°C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock 0°C to +100°C, 5 min. dwell, 10 sec. transfer, 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/ JEDEC, JESD22-A-102 CONSTRUCTION VARIABLE RoHS COMPLIANT Resistance to Solder Heat +260°C, 30 secs. MIL-STD-750 (Method 2031) PACKAGE TYPE IPP RATING Moisture Sensitivity Level 85%RH, +85°C, 168 hrs., 3 reflow cycles (+260°C Peak). JEDEC-J-STD-020, Level 1 P xxx 2 A C L FS1 TYPE FAILSAFE OPTION* MEDIAN VOLTAGE RoHS COMPLIANT P = SIDACtor CONSTRUCTION VARIABLE PACKAGE TYPE IPP RATING * Failsafe devices are only offered in bulk pack, reel pack not available. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/06/16 Part Marking XXXXXXXXX xxxxx Part Marking Code (Refer to Electrical Characteristics Table) Date Code SIDACtor ® Protection Thyristors High Surge Current Protection Dimensions - Modified TO-220 A Inches O D Temperature Measurement Point F G Dimensions - Modified TO-220 with Failsafe P PIN 3 PIN 2 PIN 1 L M K H N J The modified TO-220 package is designed to meet mechanical standards as set forth in JEDEC publication number 95. Millimeters Min Max Min A 0.400 0.410 10.16 10.42 Max D 0.360 0.375 9.14 9.53 F 0.110 0.130 2.80 3.30 G 0.540 0.575 13.71 14.61 H 0.025 0.035 0.63 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.90 M 0.070 0.085 1.78 2.16 N O P 0.018 0.024 0.46 0.61 0.178 0.290 0.188 0.310 4.52 7.37 4.78 7.87 Tape and Reel Specification - Modified TO-220 0.240 (6.10) Dimensions - Modified TO-220 Type 60 with Failsafe 0.019 (0.5) 1.626 (41.15) 0.750 ± 0.010 (19.05 ± 0.25) 0.720 (18.29) 0.360 (9.14) 0.500 (12.7) 0.100 (2.54) 0.100 (2.54) 14.173 (360.0) Dimensions are in inches (and millimeters). Direction of Feed 1.968 (50.0) Packing Options Package Type A Description Quantity Added Suffix Industry Standard Modified TO-220 Tape and Reel Pack 700 RP EIA-468-B Modified TO-220 Bulk Pack 500 (no added suffix) N/A Modified TO-220 Type 60 Lead Form Bulk Pack 500 60 (special order item, contact factory for details) N/A © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/06/16