Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Sxx15x & Sxx16x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. Features & Benefits • RoHS compliant • Glass – passivated junctions • Surge capability up to 225 A Applications Agency Approval Agency • Voltage capability up to 1000 V Typical applications are capacitive discharge systems for strobe lights, nailers, staplers and gas engine ignition. Also controls for power tools, home/brown goods and white goods appliances. Agency File Number L Package: E71639 Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Main Features Symbol IT(RMS) VDRM /VRRM IGT Value Unit 15 & 16 A 400 to 1000 V 30 mA Schematic Symbol A K G Absolute Maximum Ratings — Standard SCRs Symbol Parameter Test Conditions Value Sxx15L TC = 90°C 15 IT(RMS) RMS on-state current Sxx16R Sxx16N TC = 110°C 16 Sxx15L Average on-state current TC = 90°C 9.5 IT(AV) Sxx16R Sxx16N TC = 110°C 10.0 single half cycle; f = 50Hz; TJ (initial) = 25°C 188 single half cycle; f = 60Hz; TJ (initial) = 25°C 225 Unit A A ITSM Peak non-repetitive surge current I 2t I2t Value for fusing tp = 8.3 ms 210 A2s Critical rate of rise of on-state current f = 60 Hz ; TJ = 125°C 125 A/μs Peak gate current TJ = 125°C 3 A Average gate power dissipation TJ = 125°C 0.6 W Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 125 °C di/dt IGM PG(AV) Tstg TJ Note: xx = voltage © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16 A Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Electrical Characteristics (TJ = 25°C, unless otherwise specified) Value Symbol Test Conditions IGT VD = 12V RL = 60 Ω VGT VD = 12V RL = 60 Ω Sxx15x Sxx16x Unit MAX. 30 mA MAX. 1 V 1.5 V MAX. VD = VDRM; gate open; TJ = 100°C 400V 450 600V 425 800V dv/dt 1000V 400 MIN. 200 400V VD = VDRM; gate open; TJ = 125°C V/μs 350 600V 325 800V 300 VGD VD = VDRM RL = 3.3 kΩ TJ = 110°C MIN. 0.2 V IH IT = 200mA (initial) MAX. 40 mA tq IT=2A; tp=50μs; dv/dt=5V/μs; di/dt=-30A/μs MAX. 35 μs tgt IG = 2 x IGT PW = 15µs IT = 12A TYP. 2 μs Value Unit 1.6 V Note: xx = voltage, x = package (1) IT=2A; tp=50μs; dv/dt=5V/μs; di/dt=-30A/μs Static Characteristics Symbol Test Conditions 15A Device IT = 30A; tp = 380 µs VTM TJ = 25°C IDRM / IRRM MAX. 16A Device IT = 32A; tp = 380 µs VDRM = VRRM TJ = 100°C TJ = 125°C 400 - 600V 10 800 - 1000V 20 400 - 600V 500 MAX. 800V 1000 1000V 3000 400 - 600V 1000 800V 2000 μA Thermal Resistances Symbol Parameter Rθ(J-C) Junction to case (AC) Rθ(J-A) Junction to ambient Value Sxx16R/ Sxx16N 1.1 Sxx15L 2.5 Sxx16R/Sxx16N 40 Sxx15L 50 Unit °C/W °C/W Note: xx = voltage © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16 Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature Figure 2: N ormalized DC Gate Trigger Voltage vs. Junction Temperature 2.0 Ratio of VGT / VGT (TJ = 25ºC) Ratio of IGT / IGT (TJ = 25°C) 2.0 1.5 1.0 0.5 1.5 1.0 0.5 0.0 0.0 -40 -15 10 35 60 85 110 -40 125 -15 10 Junction Temperature (TJ) -- (ºC) Figure 3: Normalized DC Holding Current vs. Junction Temperature Instantaneous On-state Current (iT) – Amps Ratio of IH / IH (TJ = 25°C) 60 85 110 125 Figure 4: O n-State Current vs. On-State Voltage (Typical) 2.0 1.5 1.0 0.5 60 50 40 30 20 10 0 0.0 -40 -15 10 35 60 85 110 0.7 125 0.8 0.9 Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Instantaneous On-state Voltage (vT) – Volts Junction Temperature (TJ) -- (°C) Figure 6: M aximum Allowable Case Temperature vs. RMS On-State Current 14 130 125 12 Maximum Allowable Case Temperature (TC ) - °C Average On-State Power Dissipation [PD(AV)] - (Watts) 35 Junction Temperature (TJ) -- (°C) 10 8 6 4 2 Sxx16R Sxx16N 120 115 110 105 Sxx15L 100 95 90 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 85 80 0 0 2 4 6 8 10 12 RMS On-State Current [I T(RMS) ] - (Amps) © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16 14 16 0 2 4 6 8 10 12 14 RMS On-State Current [IT(RMS)] - Amps 16 18 Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Figure 7: Maximum Allowable Case Temperature vs. Average On-State Current Figure 8: Maximum Allowable Ambient Temperature vs. RMS On-State Current 1.2 130 Sxx16R Sxx16N 120 1.0 Normalized Peak Current Maximum Allowable Case Temperature (TC)- °C 125 115 110 105 Sxx15L 100 95 90 0.6 0.4 0.2 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 85 0.8 0.0 80 0 1 2 3 4 5 6 7 8 Average On-State Current [IT(AVE) ] - Amps 9 10 0 11 25 50 75 100 125 150 Case Temperature (TC ) - °C Figure 9: Maximum Allowable Ambient Temperature vs. Average On-State Current 120 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING Maximum Allowable Ambient Temperature (TA) - °C 100 Sxx16R Sxx16N 80 60 Sxx15L 40 20 0 0.0 0.5 1.0 Average On-State Current [IT(AVE)] - Amps 1.5 Note: xx = voltage Figure 10: Peak Capacitor Discharge Current Figure 11: Peak Capacitor Discharge Current Derating 1.2 1.0 Normalized Peak Current Peak Discharge Current (ITM) - Amps 1000 100 ITRM 0.8 0.6 0.4 0.2 tW 0.0 10 0.5 1.0 10.0 Pulse Current Duration (tw) - ms 50.0 0 25 50 75 100 125 150 Case Temperature (TC ) - °C © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16 Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Figure 12: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive) On-state Current (I TSM) – Amps 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. G ate control may be lost during and immediately following surge current interval. 2. O verload may not be repeated until junction temperature has returned to steady-state rated value. Sxx16R Sxx16N 100 Sxx15L 10 1 10 100 1000 Surge Current Duration -- Full Cycles Soldering Parameters Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260 Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C +0/-5 °C Additional Information Datasheet Resources © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16 Samples tP TP Temperature Reflow Condition Ramp-up TL tL TS(max) Preheat TS(min) 25 Ramp-do Ramp-down tS time to peak temperature Time Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Physical Specifications Environmental Specifications Test Terminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy Specifications and Conditions AC Blocking Temperature Cycling Temperature/ Humidity MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150°C Design Considerations High Temp Storage Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Low-Temp Storage 1008 hours; -40°C Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT AREA (REF.) 0.17 IN2 O A E Dimension 8.13 .320 P ANODE B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H CATHODE ANODE GATE K J N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16 Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab TC MEASURING POINT O A E AREA (REF.) 0.17 IN2 Dimension 8.13 .320 P B C 13.36 .526 D 7.01 .276 F R G L H CATHODE ANODE GATE N K Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). M J Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Dimensions — TO- 263AB (N-package) — D2-Pak Surface Mount TC MEASURING POINT B AREA: 0.11 in 2 C V Dimension E ANODE 8.41 .331 7.01 .276 A S W U K GATE CATHODE G J H D F 11.68 .460 2.16 .085 7.01 .276 7.01 .276 16.89 .665 8.89 .350 1.40 .055 3.81 .150 2.03 .080 6.60 .260 © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16 8.13 .320 A B C D E F G H J K S V U W Inches Millimeters Min Max Min Max 0.360 0.380 0.178 0.025 0.045 0.060 0.095 0.092 0.018 0.090 0.590 0.035 0.002 0.040 0.370 0.420 0.188 0.035 0.060 0.075 0.105 0.102 0.024 0.110 0.625 0.045 0.010 0.070 9.14 9.65 4.52 0.64 1.14 1.52 2.41 2.34 0.46 2.29 14.99 0.89 0.05 1.02 9.40 10.67 4.78 0.89 1.52 1.91 2.67 2.59 0.61 2.79 15.88 1.14 0.25 1.78 Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Product Selector Voltage Part Number Gate Sensitivity Type X 30mA Standard SCR TO-220L X 30mA Standard SCR TO-220R X 30mA Standard SCR TO-263 400V 600V 800V 1000V Sxx15L X X X Sxx16R X X X Sxx16N X X X Package Note: xx = Voltage Packing Options Marking Weight Packing Mode Base Quantity Sxx15LTP Part Number Sxx15L 2.2 g Tube 500 (50 per tube) Sxx16RTP Sxx16R 2.2 g Tube 500 (50 per tube) Sxx16NTP Sxx16N 1.6 g Tube 500 (50 per tube) Sxx16NRP Sxx16N 1.6 g Embossed Carrier 500 Note: xx = Voltage TO-263 Embossed Carrier Reel Pack (RP) Specs TO-220 AB - (L and R Package) TO-263 AB - (N Package) Meets all EIA-481-2 Standards 0.63 (16.0) 0.945 0.827 (24.0) (21.0) 0.157 (4.0) Part Marking System 0.059 (1.5) DIA Gate Cathode Sxx16R * YM ® * Cover tape Anode 0.512 (13.0) Arbor Hole Diameter 12.99 (330.0) Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code Dimensions are in inches (and millimeters). Part Numbering System 1.01 (25.7) S 60 16 R Direction of Feed DEVICE TYPE S: SCR VOLTAGE RATING 40: 400V 60: 600V 80: 800V K0: 1000V CURRENT RATING 15: 15A 16: 16A 56 LEAD FORM DIMENSIONS xx: Lead Form Option SENSITIVITY & TYPE (blank): 30mA PACKAGE TYPE L: TO-220 Isolated R: TO-220 Non-Isolated N: TO-263 (D2-Pak) © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16