DS55-0004 Low Cost Five-Way GMIC SMT Power Divider 824-896 MHz Features • • • • • • • • Rev. V3 Functional Block Diagram Small Size, Low Profile Superior Repeatability (Lot-to-Lot Variation) Industry Standard SOIC-16 SMT Plastic Package Typical Isolation: 26 dB Typical Insertion Loss: 0.7 dB Low Cost 1 Watt Power Handling SOIC-16 Package Description M/A-COM’s DS55-0004 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOIC-16 plastic package. This 5-way power divider is ideally suited for applications where PCB real estate is at a premium and part count reduction and cost are critical. Typical applications include base station switching networks and other cellular equipment, including subscriber units. Available in tape and reel. The DS55-0004 is fabricated using a passiveintegrated circuit process. The process features full-chip passivation for increased performance and reliability. Pin Configuration Ordering Information Pin No. Function Pin No. Function 1 GND 9 GND 2 GND 10 GND 3 GND 11 RF5 4 RF2 12 GND Part Number Package 5 GND 13 RF4 DS55-0004 Bulk Packaging 6 RF1 14 GND DS55-0004-TR 1000 piece reel 7 GND 15 RF3 DS55-0004-TB Sample Test Board 8 RF IN 16 GND Note: Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS55-0004 Low Cost Five-Way GMIC SMT Power Divider 824-896 MHz Rev. V3 Electrical Specifications: TA = +25°C, Z0 = 50Ω Parameter Insertion Loss Above 7.0dB Isolation Units Min Typ Max dB — 0.7 1.2 dB 21 26 — VSWR Input — — 1.4:1 1.6:1 VSWR Output — — 1.2:1 1.5:1 dB — 0.2 0.6 ° — 5 10 Amplitude Balance Phase Balance Handling Procedures Please observe the following precautions to avoid damage: Absolute Maximum Ratings 1,2 Parameter Absolute Maximum 3 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Input Power Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 3. With Internal load dissipation of 0.125 W maximum. Typical Performance Curves Insertion Loss vs. Frequency (Dashed lines show amplitude balance window) VSWR vs. Frequency Isolation vs. Frequency Phase Balance vs. Frequency (Relative RF1) 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS55-0004 Low Cost Five-Way GMIC SMT Power Divider 824-896 MHz Rev. V3 SOIC-16† † Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.