RoHS 5 Watt Switching Power Adapters Features * Thin Mount Design * Overload and Short Circuit Protection * UL & cUL Approved file E320717 * CEC Level IV * RoHS Compliant * Optional Colors Available * Available with optional DC Plug configurations General Specifications Operation Temperature: 0 deg C~ +40 degC Insulation Resistance Pri - Sec.: > 50Mohms 500VDC Storage Temperature: -20 degC~ +85 degC Overcurrent Protection: 120%, Auto Restart Dielectric Withstanding (Hipot): 3000 VAC , 1 Minute Overvoltage Protection: 120%, Auto Restart Input Specifications Output Specifications Input Voltage: 100 ~ 240 VAC Regulation: Line <2%, Load <5% Input Frequency: Input Current: 50/60Hz .25A Max. Recovery Time: Ripple and Noise: +/-2% max, 1ms <1% Max. Hold up time: 20ms VAC Inrush Current: <=20A/240VAC ACI-Cxxxx ICyyyy -5W Part Number Designation For a complete part number: 1) Replace the "xxxx " with the Output Current you require. Example 1: An Output Current of 200mA would read "0200" Example 2 : An Output Current of 1.2A would read "1200" 2) Replace the "yyyy " with the Output Voltage you require. Example 1: An Output Voltage of 12Vdc would read "12.0" Example 2: An Output Voltage of 3.3Vdc would read "3.3" Final part number example 1: ACI-C0200IC12.0-5W Final part number example 2: ACI-C1200IC3.3-5W See the table below for available output voltage and current within the 5 watt series Output Range Voltage DC (V) 3.3 ~ 7.7 7.6 ~ 11.9 12 ~ 17.9 18 ~ 28 28.1 ~ 36 714-665-1140 Current (A) 1.2 ~ 0.73 0.725 ~ 0.46 0.46 ~ 0.305 0.305 ~ 0.195 0.195 ~ 0.15 Efficiency Min. % 60 60 60 60 60 Ripple P-P(mV) 60 120 150 280 300 ALLIED COMPONENTS INTERNATIONAL 09/03/10 15 Power Max. (W) 5.5 5.5 5.5 5.5 5.5 www.alliedcomponents.com