WMAPU10 SERIES 8~10 Watts, AC/DC Wall Mount Power Supplies Rev A Wall Industries, Inc. FEATURES 2 Prong Plug-in Mains Connector Class II RoHS Compliant Single Outputs Ranging from 5VDC to 48VDC 10 Watts Output Power -40°C to +70°C Operating Temperature Range 85% High Efficiency Meets FCC Class B Emission Limits Energy Star 2.0, Efficiency Level V UL/cUL (UL 60950-1: 2nd ed.) & TUV/GS (EN 60950-1: 2nd ed.) 90-264VAC Input Voltage Range Safety Approvals Optional Output Connectors Available 100% Burn-In Tested DESCRIPTION Size: 2.20 x 1.73 x 1.08 inches 56.0 x 44.0 x 27.5 mm Weight: 3.17oz (90g) The WMAPU10 series of Class II AC/DC desktop power supplies provides 10 Watts of continuous output power in a 2.20 x 1.73 x 1.08 inch package. This series consists of single output models ranging from 5VDC to 48VDC with a 90~264VAC input voltage range and a -40°C to +70°C operating temperature. All units are UL 94V-1, RoHS, and CEC & Energy Star Level V compliant. This series also meets new CE requirements and FCC class B emission limits. All models have UL/cUL (UL 60950-1: 2nd edition) and TUV/GS (EN 60950-1: 2nd edition) safety approvals. All units have been 100% burn-in tested. MODEL SELECTION TABLE WMAPU10-102 5 ~ 6 VDC 1.60 ~ 1.33 A 5% 2% 8W No-Load Power Consumption 0.2W WMAPU10-103 6 ~ 8 VDC 1.33 ~ 1.00 A 5% 2% 8W 0.2W WMAPU10-104 8 ~ 11 VDC 1.25 ~ 0.90 A 5% 2% 10W 0.3W WMAPU10-105 11 ~ 13 VDC 0.90 ~ 0.76 A 5% 2% 10W 0.3W WMAPU10-106 13 ~ 16 VDC 0.76 ~ 0.62A 5% 2% 10W 0.3W 16 ~ 21 VDC 0.62 ~ 0.47 A 3% 2% 10W 0.3W WMAPU10-108 21 ~ 27 VDC 0.47 ~ 0.37 A 3% 2% 10W 0.3W WMAPU10-109 27 ~ 33 VDC 0.37 ~ 0.30 A 3% 2% 10W 0.3W WMAPU10-110 33 ~ 40 VDC 0.30 ~ 0.25 A 3% 2% 10W 0.3W WMAPU10-111 40 ~ 48 VDC 0.25 ~ 0.20 A 3% 2% 10W 0.3W Input Voltage Range Output Voltage (1) Output Current Model Number 90 ~ 264VAC WMAPU10-107 Total Regulation (2) Ripple & Noise Output Power NOTES 1. The output voltage is specified as a range (ex: 33~40VDC); the customer must specify what they would like the output voltage set at. 2. Models WMAPU10A-102~105 need to use AWG#20/4FT output cable in order to meet the total regulation specified. Models WMAPU10A-106~111 need to use AWG#24/4FT output cable in order to meet the total regulation specified. The regulation and efficiency will change if a different output cable is used. 3. Optional output connectors are available for this series. Please call factory for ordering details. DERATING 120 NOTES: 1. Operating Temperature: -40°C to +70°C 2. Derating linearly from 100% load at 50°C to 50% load at 70°C Output Power (%) 100 80 60 40 20 0 -40 07/03/2014 0 20 30 40 50 60 Ambient Temperature (°C) 70 80 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 WMAPU10 SERIES 8~10 Watts, AC/DC Wall Mount Power Supplies Rev A Wall Industries, Inc. TECHNICAL SPECIFICATIONS: WMAPU10 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Input Voltage Safety Approvals Input Voltage Range 100 240 Operating Input Voltage Range 90 264 Input Frequency 47 Input Current Inrush Current No Load Power Consumption 63 100VAC, full load 0.3 240VAC, full load 0.3 Hz A 115VAC, full load, 25°C, cold start 35 40 230VAC, full load, 25°C, cold start 70 80 230VAC, no load VAC A See Table OUTPUT SPECIFICATIONS Output Voltage See Table Line Regulation LL to HL, full load Load Regulation 230VAC 0.5 3 Output Power See Table Output Current See Table Ripple & Noise (peak to peak) 90VAC, full load Hold-up Time 110VAC, full load Start-up Time 100VAC, full load Transient Response Time 100VAC, Full load to half load Temperature Coefficient 0~50°C 1 % 5 % 2 10 % ms 2 -0.04 s 4 ms +0.04 %/°C PROTECTION Over Voltage Protection none Over Current Protection none, but output is protected against short circuit conditions GENERAL SPECIFICATIONS Efficiency 230VAC, full load Dielectric Withstanding Voltage Primary to Secondary Leakage Current 240VAC/60Hz 71 85 4242 % VDC 0.25 mA ENVIRONMENTAL SPECIFICATIONS Operating Temperature -40 +70 °C Storage Temperature Derating linearly from 100% Load at 40°C to 50% load at 70°C -40 +85 °C Operating Humidity 0 95 % Storage Humidity 0 95 % Cooling Free air convection MTBF MIL-HDBK-217F, 25°C 100,000 hours PHYSICAL SPECIFICATIONS Weight 3.17oz (90g) Dimensions (L x W x H) 2.20 x 1.73 x 1.08 inches (56.0 x 44.0 x 27.5 mm) AC Plug US Type Output Connector Several options available SAFETY, EMC, & COMPLIANCE UL/cUL (UL60950-1: 2nd edition), TUV/GS (EN60950-1: 2nd edition), CE Safety Approvals EMI Requirements for FCC Compliance CEC & Energy Star 07/03/2014 110VAC B Class RoHS and UL 94V-1 CEC and Energy Star 2.0, Efficiency Level V Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Rev A Wall Industries, Inc. WMAPU10 SERIES 8~10 Watts, AC/DC Wall Mount Power Supplies MECHANICAL DRAWING 0.67 [17.0] 2.20 [56.0] CAUTION 1.73 [44.0] INDOOR USE ONLY R2.5 R5.0 R2.5 0.25 [6.3] 1.08 [27.5] R1.0 R7.5 0.50 [12.7] R2.5 NOTES 1. Unit: inches [mm] 2. Tolerance: ±0.04 [±1.0] 3. Weight: 3.17oz (90g) 4. Models WMAPU10A-102~105 need to use AWG#20/4FT output cable in order to meet the total regulation specified. Models WMAPU10A-106~111 need to use AWG#24/4FT output cable in order to meet the total regulation specified. The regulation and efficiency will change if a different output cable is used. 5. Optional output connectors available. Please call factory for ordering details. 6. All dimensions are for reference only 07/03/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A Wall Industries, Inc. WMAPU10 SERIES 8~10 Watts, AC/DC Wall Mount Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 07/03/2014 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4