WMIHPU15 SERIES Up to 15 Watts, Medical AC/DC Wall Mount Power Supplies Rev A Wall Industries, Inc. FEATURES Class II System Single Outputs Ranging from 3VDC to 55VDC RoHS Compliant -10°C to +70°C Operating Temperature Range Up to 15 Watts Output Power Meets FCC Part-18 Class B & CISPR-11 EN55011 86% High Efficiency Class B Emission Limits Energy Star 2.0, Efficiency Level V UL/cUL 3rd Edition Medical Approvals 80-275VAC Input Voltage Range Interchangeable Plug Options: United States, Over Voltage & Over Load Protection Input to Output: 2MOPP Europe, Australia, & United Kingdom Types Optional Output Connectors Available SAFETY APPROVALS Size: 2.36 x 1.71 x 1.58 inches 60.0 x 43.5 x 40.2 mm Weight: 5.82oz (165g) DESCRIPTION AC Plug Types: • Unites States (“U” Suffix) • Europe (“E” Suffix) • Australia (“A” Suffix”) • United Kingdom (“K” Suffix) Applications: • Home Healthcare Equipment • Patient Monitors • Blood Pressure Systems • Portable Medical Devices • ECG Machines The WMIHPU15 series of Class II medical AC/DC wall mount power supplies offers up to 15 watts of output power in a 2.36” x 1.71” x 1.58” package. This series consists of single output models ranging from 3VDC to 55VDC with an 80~275VAC input voltage range and a -10°C to +70°C operating temperature. This series meets FCC Part-18 Class B and CISPR-11 EN55011 Class B Emission Limits and has ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd edition) and CE safety approvals. All units are RoHS and Energy Star Level V compliant. Plugs come in United States (“U” suffix), Europe (“E” suffix), Australia (“A” suffix), and United Kingdom (“K” suffix) types. Plugs are sold separately so please contact factory for ordering details. MODEL SELECTION TABLE Model Number (1) Input Voltage Adjustable Voltage Range Adjustable Current Range Maximum Ripple & Noise Output Power Min Max Min Max 2.40 A 7.2W 66mVp-p Efficiency No Load Consumption ±5% 65% 0.2W WMIHPU15-101x 3.0 VDC 4.99 VDC WMIHPU15-102x 5.0 VDC 5.99 VDC 2.00 A 2.40 A 12W 50mVp-p ±5% 80% 0.3W WMIHPU15-103x 6.5 VDC 8.0 VDC 1.50 A 1.84 A 12W 70mVp-p ±5% 82% 0.3W WMIHPU15-104x 8.0 VDC 11.0 VDC 1.22 A 1.68 A 13.5W 90mVp-p ±5% 83% 0.3W WMIHPU15-105x 11.0 VDC 13.0 VDC 1.15 A 1.36 A 15W 100mVp-p ±5% 84% 0.3W WMIHPU15-106x 13.0 VDC 16.0 VDC 0.94 A 1.15 A 15W 100mVp-p ±5% 85% 0.3W WMIHPU15-107x 16.0 VDC 21.0 VDC 0.72 A 0.94 A 15W 100mVp-p ±5% 85% 0.3W WMIHPU15-108x 21.0 VDC 27.0 VDC 0.55 A 0.72 A 15W 100mVp-p ±5% 86% 0.3W WMIHPU15-109x 27.0 VDC 33.0 VDC 0.45 A 0.55 A 15W 100mVp-p ±3% 86% 0.3W WMIHPU15-110x 33.0 VDC 40.0 VDC 0.37 A 0.45 A 15W 100mVp-p ±3% 86% 0.3W WMIHPU15-111x 40.0 VDC 48.0 VDC 0.32 A 0.37 A 15W 100mVp-p ±3% 86% 0.3W WMIHPU15-112x 48.0 VDC 55.0 VDC 0.28 A 0.32 A 15W 100mVp-p ±3% 86% 0.3W 80 ~ 275VAC 1.44 A Total Regulation NOTES 1. The “x” in the model number can be “U” for United States type plug; “E” for Europe type plug, “A” for Australia type plug, or “K” for United Kingdom type plug. Plugs are sold separately so please contact factory for ordering details. 2. Output can provide up to peak load when power supply starts up. Continuous staying in more than rated load is not allowed. 3. At factory, in 60% rated load condition, each output is checked to be within voltage accuracy. 4. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 5. Load regulation is defined by changing ±40% of measured output load from 60% rated load. 6. Ripple & noise is measured by using 20MHz limited bandwidth and with 0.47F capacitor in parallel across the output at nominal line and rated load. 7. Hold-up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. 8. Optional output connectors are available for this series. Please call factory for ordering details. 08/04/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 Wall Industries, Inc. Rev A WMIHPU15 SERIES Up to 15 Watts, Medical AC/DC Wall Mount Power Supplies TECHNICAL SPECIFICATIONS: WMIHPU15 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Input Voltage Input Frequency Input Current Inrush Current No Load Power Consumption OUTPUT SPECIFICATIONS Output Voltage Line Regulation Total Regulation Output Power Output Current Ripple & Noise (peak to peak) Hold-up Time Start-up Time Transient Response Time Temperature Coefficient PROTECTION Short Circuit Protection Over Load Protection GENERAL SPECIFICATIONS Efficiency Dielectric Withstanding Voltage Protection Classes ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Storage Humidity Cooling Flammability Rating Vibration Operating Altitude (Elevation) MTBF PHYSICAL SPECIFICATIONS Weight Dimensions (L x W x H) Safety Approvals Input Voltage Range Derating linearly from 100% load at 90VAC to 80% load at 80VAC Sine wave 100VAC, full load 240VAC, full load 100VAC, full load, 25°C, cold start 240VAC, full load, 25°C, cold start 230VAC, no load See Note 6 See Note 7 100~240VAC, full load 110VAC, Full load Compliance CEC & Energy Star 08/04/2014 12 0.3 Recovers automatically after fault condition is removed 110 Nominal line and rated load Primary to Secondary, limit current <10mA 5656 Hz A A 1 % 2 4 +0.04 ms s ms %/°C Auto-recovery 150 % See Table VDC Double insulated, Class II Derating linearly from 100% Load at 40°C to 50% load at 70°C 10~95% RH Non-condensing 10~500Hz, 10min./1cycle, 60 min each along X, Y, Z axes -10 -40 0 0 +70 +85 95 95 Free air convection UL94V-1 5 3000 MIL-HDBK-217F, 25°C Safety Approvals Compliance to EN55011 (CISPR11), EN61000-3-2,-3 Electro Static Discharge VAC See Table See Table See Table See Table -0.04 Output Connector SAFETY, EMC, & COMPLIANCE EMC Emission Surge Voltage 240 275 63 0.6 0.4 35 85 See Table See Table See Note 4 See Note 5 “U” suffix “K” suffix “E” suffix “A” suffix AC Plug 100 80 47 Air Discharge, IEC61000-4-2 Contact Discharge, IEC61000-4-2 100,000 °C °C %RH %RH G m hours 5.82oz (165g) 2.36 x 1.71 x 1.58 inches (60.0 x 43.5 x 40.2 mm) United States United Kingdom Europe Australia Several options available ANSI/AAMI ES 60601-1:2005 (UL/cUL 3rd ed.) IEC60601-1 3rd edition CE B Class 2 kV 8 kV 6 RoHS Compliant CEC and Energy Star 2.0, Efficiency Level V Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 WMIHPU15 SERIES Up to 15 Watts, Medical AC/DC Wall Mount Power Supplies Rev A Wall Industries, Inc. DERATING Input Voltage Derating Curve Temperature Derating Curve 110 110 100 100 90 80 Load (%) Load (%) 90 80 70 70 60 50 40 30 60 20 50 10 0 -10 80 100 120 140 160 180 200 Input Voltage (VAC) 220 240 260 280 0 10 20 30 40 Temperature (°C) 50 60 70 80 MECHANICAL DRAWING 1.58±0.04 [40.2±1.0] OPTIONAL 2.36±0.04 [60.0±1.0] 1.71±0.04 [43.5±1.0] United States Type (Suffix “U”) United Kingdom Type (Suffix “K”) Europe Type (Suffix “E”) NOTES: 1. Unit: inches [mm] 2. Tolerance: ±0.04 [±1.0] 3. Weight: 5.82oz (165g) 4. Models WMIHPU15-101~104 need to use AWG#18/4FT output cable in order to meet the total regulation specified. Models WMIHPU15-105~109 need to use AWG#20/4FT output cable in order to meet the total regulation specified. Models WMIHPU15-110~112 need to use AWG#22/4FT output cable in order to meet the total regulation specified. The technical specifications will change if a different output cable is used. 5. Plugs are sold separately. Please call factory for ordering details. 6. Optional output connectors available. Please call factory for ordering details. 7. All dimensions are for reference only. 08/04/2014 AustraliaType (Suffix “A”) Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A Wall Industries, Inc. WMIHPU15 SERIES Up to 15 Watts, Medical AC/DC Wall Mount Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 08/04/2014 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4