5.6m Ku- and K-band Earth Station Antenna

EARTH STATION ANTENNA
5.6 Meter ESA
Like all ASC Signal earth station antennas, the 5.6 Meter Earth Station
Antenna provides high gain and exceptional pattern characteristics.
This antenna system is designed to address the stringent requirements
of both the television broadcast industry and telecommunications
network operators who demand unsurpassed flexibility and electrical
performance in high-quality, cost-effective, and reliable packages.
The electrical performance and exceptional versatility provides
the ability to configure the antenna with your choice of linearly- or
circularly- polarized 2- or 4- port combining networks. That versatility
is provided at the time of initial purchase, as well as in the future, as
your satellite communication requirements evolve.
Features
This antenna system is used worldwide in broadcast applications
and high density data, voice and communications networks. The
ASC Signal 5.6 meter earth station antenna features a computeroptimized dual reflector Gregorian optics system and close-tolerance
manufacturing techniques.
• 3 year warranty on all structural components
This combination provides extremely accurate surface contour
resulting in exceptionally high gain and closely controlled pattern
characteristics. ASC Signal earth station antennas provide maximum
durability with minimal maintenance.
• Configured for Ku- Band and K- Band transmit
and receive
• FCC paragraph 25.209 for mandatory pattern requirements for 2 degree satellite spacing based
on off satellite measurement at Ku- Band
• Deep equipment enclosure for hub mount electronics
1
PBESA56M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation
EARTH STATION ANTENNA
5.6 Meter ESA
Design Standards
Reflector
Ground Mount
Hardware
Aluminum painted with highly diffusive white
paint
Hot-dipped galvanized steel, per ASTM-A123
for structural steel.
Sizes ≤ 3/8 in (9.5mm), stainless steel,
passivated per MIL-F-14072-E300
Sizes �≥ 3/8 in (9.5mm), hot-dipped galvanized
stainless steel, passivated per ASTM-A123
Environmental Performances
Operating Temperature
-40o to 52oC (-40o to 125oF)
Seismic (Earthquake)
1 G Vertical and Horizontal acceleration.
Equivalent to a Richter Magnitude 8.3, and
Grade 11 on the modified Mercalli Scale
Operational Winds
Survival Winds
45 mph (72 km/h) Gusts to 65 mph (105 km/h)
125 mph (200 km/h) in any stationary position
of operation
Rain
4 in (102 mm) per hour
Solar Radiation
360 BTU/hr/ft2 (1135 Watts/m2)
Relative Humidity
100%
Shock and Vibration
As encountered by commercial Air, Rail and
Truck shipment.
Atmospheric Conditions
As encountered by Moderately Corrosive
Coastal and Industrial Areas.
Mechanical Performances
The 5.6m Antenna mechanical general specifications and performances are
listed in below table. Additional information, dimensions and layout may be
provided by ASC Signal on a case-by-case basis.
Optics Type
Reflector Material
Reflector Segments
Mount Type
Dual Reflector Gregorian
Precision-Formed Aluminum
16
Az over El Tripod Mount
Antenna Pointing Range, Coarse/(Continuous)
Elevation:
5-90o (85o)
Azimuth:
180o (120o)
Polarization
180o (180o)
Hub/Enclosure Dimensions
Diameter
Depth
1.32 m (52 in)
1.17 m (46 in)
Shipping Information
Packing Options
Standard Commercial Domestic Pack
Ocean Export Pack - For non-containerized,
packed for seal against salt water spray
Air Export Pack - For freighter aircraft shipments.
Lower deck AirPack requires specialized bids
Container Packaging
Required Shipping Container
Standard 20 ft land/sea container
Included
OCEANSHP-MD
AIR EXPORT PACK-MD
CNTPCK-MD
Quantity 1
Shipping container information is given for basic configuration and may vary depending on the
selected options, please contact ASC Signal for specific container loading plan.
2
PBESA56M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation
Dimensional Drawings
18.5 ft
(5.6 m)
Center
Position
(-60 TO
+60)
Left
Position
(-90 TO
+30)
Right
Position
(-30 TO
+90)
Azimuth
Pivot Axis
1.8ft
(0.6m)
D
C
11 ft
(3.4 m)
13.6 ft
(4.1 m)
6.0 ft
(1.8 m)
B
Elevation
Pivot Axis
E
A
Total Area
Covered
Top View
90
80
Elevation Angle (Degrees)
EARTH STATION ANTENNA
5.6 Meter ESA
70
E
60
50
D
40
30
A
C
B
20
10
5
0
2
4
6
8
10
12
14
16
Dimension (Feet)
18
20
22
24
26
28
3
PBESA56M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation
Foundation, Typical Slab
7 ft.
Typical Foundation Information
Note: Crane access is to be
provided within 40ft (12m)
of
PAD #3 (based on 15 ton
crane)
7 ft.
15ft
(4.5m)
minimum
clearance
Assembly area for mount and
antenna
7 ft.
PAD 1
3 ft. 8 in.
PAD 3
3 ft. 8 in.
7 ft.
PAD 2
2ft (0.6m)
minimum
clearance
30ft (9m)
EARTH STATION ANTENNA
5.6 Meter ESA
Azm = Azimuth
direction of mount
20ft (6m)
minimum
clearance
15ft
(4.5m)
minimum
clearance
30ft (9m)
4 ft. 8 in.
4 ft. 8 in.
30ft (9m) minimum
clearance
on either side of foundation
for crane access
1 ft. 8 in.
Foundation information are provided in bulletin 237029, please contact ASC Signal.
Soil Bearing Capacity,
2000 lb/ft2 (9770 kg/m2)
Reinforcing Steel,
1308 lbs (593 kg)
Concrete Compressive
3000 psi (211 kg/cm2)
Strength,
Foundation Size:
(for specific standard soil and typical design)
Length
14 ft (4.27 m)
Width
14 ft (4.27 m)
Depth
1.67 ft (0.508 m)
Concrete Volume
12.1 yd3 (9.25 m3)
NOTE: Other typical foundation designs are available. Soil borings and foundation
analysis should be performed by a qualified civil engineer.
4
PBESA56M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation
EARTH STATION ANTENNA
5.6 Meter ESA
Motor Drive Speed Summary
Motorization and NGC Options
Variable
Azimuth
Elevation
Polarization
0.05o/s
0.05o/s
0.5o/s
0.5o/s
1o/s
Motorization
One motorization system is available for this antenna: the NGC tracking
system that can support Steptrack, Smartrack and Ephemeris orbital tracking.
Motor Kit
Azimuth/Elevation Motor Kit
NGC-MK7
Polarization Drive Kit (DC Step Motors)
Standard Temperature
NGC-PK5DRA
Outdoor Unit Controller (Tracking)
Power 200 - 230 VAC, 3 Phase 50/60 Hz
NGC-ODU-208-5
Power 380 - 460 VAC, 3 Phase 50/60 Hz
NGC-ODU-380-5
Antenna controller, motorization and options are detailed in specific bulletins, please contact
ASC Signal.
Antenna Configurations
Ku-Band Earth Station Antennas ITU Compliant
Motorizable Mount with Az/El Jackscrews.
ES56-1
Ku-Band Earth Station Antennas Eutelsat Compliant
Motorizable Mount with Az/El Jackscrews.1
ES56-2
K-Band Earth Station Antennas
Motorizable Mount with Az/El Jackscrews.1
1
requires optical field alignment
ES56KK-1
Indoor
NGC-IDU
NGC-001
NGC-002
NGC-003
NGC-004-02
NGC-006
NGC-007
NGC-008
NGC-009
NGC-101
NGC-102
NGC-103
NGC-104
NGC-106
NGC-107
NGC-108
NGC-109
NGC-111
NGC-115
NGC-ULPC-INTFC
NGC-ULPC-INTFC-2
NGC-119
NGC Rack Mounted Antenna Controller W/LCD
Touch Panel
NGC-IDU Analog Telephone Modem
NGC-IDU Spectrum Analyzer Card, Analog
NGC-IDU DVB Receiver Card
NGC IDU, L-Band Internal Beacon Receiver NGC-IDU Emergency Stop Button
NGC-IDU 10 Mhz Reference Source
NGC-IDU Redundant Power Supply
NGC-IDU Rack Slides
NGC-IDU Step Tracking Software
NGC-IDU Smartrack Software
NGC-IDU Predictive Track Software
NGC-IDU Full Tracking Capability Software
NGC-IDU Remote Access Software Package
NGC-IDU Spectrum Analyzer Enhanced User
Interface
Receive Pattern Test Tool
Redundancy Control Software
Sand/Dust Deviator Feature
Uplink Power Control Software Function
Uplink Power Control System Sincle Channel
Uplink Power Control System Dual Channel
NGC High Availability System Redundancy Software
Outdoor
NGC-201
NGC ODU Low Temperature Kit (-40 C)
NGC-202
NGC ODU High Temperature Kit (+60 C)
NGC-205
NGC ODU AC Polarization Drive Interface
NGC-206
NGC Exterior Emergency Stop Button
NGC-207
Pre Movement Alert Warning Light And Announcator
NGC-211
Dual Path NGC Redundancy
NGC-AESC
Environmental System Controller
RED11-x
Hub Mounted 1:1 LNA/LNB Redundancy Plate
RED12-x
Hub Mounted 1:2 LNA/LNB Redundancy Plate
Antenna controller, motorization and options are detailed in specific bulletins, please contact
ASC Signal.
5
PBESA56M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation
EARTH STATION ANTENNA
5.6 Meter ESA
Feed Matrix
Ku- BAND FEED
SYSTEMS
2LPKU-56
PORT
LP
2
RX 10.7 12.75 GHz
2
X
2LPKU-56KK
2
X
2LPKUM-56-W
X
X
2LPKUR-56-W
2
X
X
4LPKU-56-1
4
X
X
4LPKU-56-2
4
X
4LPKU-56KK-1 1
4
X
4LPKU-56KK-2 1
4
X
4LPKU-56KK-4 1
4
X
K- BAND FEED
SYSTEMS
2LPKK-56KK 2
PORT
LP
2
4
4LPKK-56KK 2
1
RX 10.95 12.75 GHz
RX 10.7 11.7 GHz
RX 10.7 13.25 GHz
X
TX 12.7513.25 GHz
TX 13.0 14.5 GHz
X
TX 13.7514.5 GHz
TX 13.7514.8 GHz
X
TX 14.0 14.5 GHz
X
X
X
X
X
X
X
X
X
X
X
X
X
RX 10.7 12.75 GHz
X
TX 17.3 18.4 GHz
X
X
X
X
X
X
requires ES56-2 or ES56KK-1
requires ES56KK-1
For redundant application, LNA support kits are available for each of the above feeds. Please contact ASC Signal.
6
PBESA56M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation
EARTH STATION ANTENNA
5.6 Meter ESA
Antenna Options and Spares
Anchor Bolt and Template Kits Options
Hub Equipment Options
201630
EMRGYLT-115
Emergency Hub Light Kit, 115 VAC
EMRGYLT-230
Emergency Hub Light Kit, 230 VAC
FV65-115
Fan and Vent Kit, 115 VAC
FV65-220
Fan and Vent Kit, 230 VAC
Azimuth and Elevation Cross Axis Waveguide Options
HUBHTR-230
Antenna Hub Heater, 230 VAC
XAPKK-56
HUBLCNTR-115/240
Hub Power Center, 115/240 VAC
HUBLCNTR-230
Hub Power Center, 230 VAC
HUBLT-115
Hub Light Kit, 115 VAC
HUBLT-230
Hub Light Kit, 230 VAC
206505
XAPKK-56-UPG
XAPKU-56
XAPKU-56-UPG
Anchor Bolt Kit For 5.6 Meter Earth Station
Antennas with Tripod Mounts
Anchor Bolt Template for 5.6 Meter Earth
Station Antennas with Tripod Mounts
K-Band cross Axis and Polarization Axis
Waveguide Kit.
K-Band Cross Axis and Polarization Axis
Waveguide Kit Upgrade. Upgrades XAPKK-56
for use with 4-port K-Band Feeds.
Ku-Band Cross Axis and Polarization Axis
Waveguide Kit. Single run for 2-Port Ku-Band
Feeds.
Ku-Band Cross Axis and Polarization Axis
Waveguide Kit Upgrade. Upgrades XAPKU-56
for use with 4-Port Ku-Band Feeds. Provides
Additional Waveguide Run.
Safety Options
Heating Options
ANTGND-9
Foundation Installed Grounding Kit
LRK9
Lightning Rod Kit
MANPL7
Maintenance Platform and Ladder Kit
OBWRNLT-115
Obstruction Warning Light Kit, 115VAC
OBWRNLT-230
Obstruction Warning Light Kit, 230VAC
Other Options
FH5A
Ku and K-Band Feed Heater
201769
Elevation Handwheel Kit
WEC56R-208-100
Electric Hot Air De-Ice System, 208 VAC, 3
Phase
Electric Hot Air De-Ice System, 380 VAC, 3
Phase
201887
Azimuth Handwheel Kit
223711-56
Theodolite Alignment Kit 1
ANGVERN-7
Manual Angle Indicator
209906-2
Lubrication and Maintenance Kit
BRNG-56-KUK
Guard, Feed Window Ku or K-band
FTST
Feed System Testing
TK-MAN-LG
Tool Kit, Large Manual Antennas
TK-MOT-LG
Tool Kit, Large Motorized Antennas
WEC56R-380-100
Envitonmental Systems Options
1
ASC Signal Corporation
1120 Jupiter Road, Suite 102
Plano Texas 75074
USA
Phone: +1-214-291-7654
Fax: +1-214-291-7655
www.ascsignal.com
sales@ascsignal.com
PDKU-56-208
Precipitation Deviator, 208 VAC, 3 Phase
PDKU-56-380
Precipitation Deviator, 380 VAC, 3 Phase
required for ES56-2 and ES56KK-1
7
PBESA56M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation