4.9m C-, X-, Ku-, Ka- and dual-band and low-PIM ESA

EARTH STATION ANTENNA
4.9 Meter ESA
Like all ASC Signal earth station antennas, the 4.9 Meter Earth Station
Antenna provides high gain and exceptional pattern characteristics.
This antenna system is designed to address the stringent requirements
of both the television broadcast industry and telecommunications
network operators who demand unsurpassed flexibility and electrical
performance in high-quality, cost-effective, and reliable packages.
The electrical performance and exceptional versatility provides
the ability to configure the antenna with your choice of linearly- or
circularly- polarized 2- or 4- port combining networks. That versatility
is provided at the time of initial purchase, as well as in the future, as
your satellite communication requirements evolve.
This antenna system is used worldwide in broadcast applications
and high density data, voice and communications networks. The
ASC Signal 4.9 meter earth station antenna features a computeroptimized dual reflector Gregorian optics system and close-tolerance
manufacturing techniques.
This combination provides extremely accurate surface contour
resulting in exceptionally high gain and closely controlled pattern
characteristics. ASC Signal earth station antennas provide maximum
durability with minimal maintenance.
Features
• Self-aligning main reflector - no optical field
alignment
• 3 year warranty on all structural components
• FCC paragraph 25.209 for mandatory pattern requirements for 2 degree satellite spacing based
on off satellite measurement at Ku- Band
• Configured for C-, X-, Ku-, K- and Ka- Band
transmit and receive
• Low PIM Capabilities
1
PBESA49M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation
EARTH STATION ANTENNA
4.9 Meter ESA
Design Standards
Reflector
Ground Mount
Hardware
Aluminum painted with highly diffusive white
paint
Hot-dipped galvanized steel, per ASTM-A123
for structural steel.
Sizes ≤ 3/8 in (9.5mm), stainless steel,
passivated per MIL-F-14072-E300
Sizes �≥ 3/8 in (9.5mm), hot-dipped galvanized
stainless steel, passivated per ASTM-A123
Environmental Performances
Operating Temperature
-40o to 52oC (-40o to 125oF)
Seismic (Earthquake)
1 G Vertical and Horizontal acceleration.
Equivalent to a Richter Magnitude 8.3, and
Grade 11 on the modified Mercalli Scale
Operational Winds
Survival Winds
45 mph (72 km/h) Gusts to 65 mph (105 km/h)
125 mph (200 km/h) in any position of
operation
Mechanical Performances
The 4.9m Antenna mechanical general specifications and performances are
listed in below table. Additional information, dimensions and layout may be
provided by ASC Signal on a case-by-case basis.
Optics Type
Reflector Material
Reflector Segments
Mount Type
Dual Reflector Gregorian
Precision-Formed Aluminum
12
Az over El, Pedestal Mount
Antenna Pointing Range, Coarse/(Continuous)
Elevation:
0-90o (90o)
Azimuth:
360o (120o)
Polarization
(180o)
Hub/Enclosure Dimensions
Diameter
Depth
1.32m (52 in)
0.81m (32 in)
Shipping Information
Rain
4 in (102 mm) per hour
Solar Radiation
360 BTU/hr/ft2 (1135 Watts/m2)
Relative Humidity
100%
Packing Options
Standard Commercial Domestic Pack
Ocean Export Pack - For non-containerized,
packed for seal against salt water spray
Air Export Pack - For freighter aircraft shipments.
Lower deck AirPack requires specialized bids
Container Packaging
Shock and Vibration
As encountered by commercial Air, Rail and
Truck shipment.
Required Shipping Container
Standard 20 ft land/sea container
Atmospheric Conditions
As encountered by Moderately Corrosive
Coastal and Industrial Areas.
Included
OCEANSHP-MD
AIR EXPORT PACK-MD
CNTPCK-MD
Quantity 1
Shipping container information is given for basic configuration and may vary depending on the
selected options, please contact ASC Signal for specific container loading plan.
2
PBESA49M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation
EARTH STATION ANTENNA
4.9 Meter ESA
Dimensional Drawings
4.9 Mete
Earth Station A
(Manual Mo
4.9 Meter
(Manual Mount)
5.8"
D
R 139.2
Azimuth Pivot Axis
C
R 126.9
Total Area
Covered
B
4.9 Meter
Earth Station Antenna
(Manual Mount)
E
A
D
20ft
18ft
16ft
14ft
A
12ft
B
10ft
C
8ft
D
6ft
E
4ft
2ft
0ft
0°
10°
20°
30°
40°
50°
60°
70°
80°
90°
C
3
PBESA49M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation
Typical Foundation Design
6 ft.
Typical Foundation Information
Note: Crane access is to be
provided within 40ft (12m) of
pads (based on 15 ton crane)
6 ft.
15ft
(4.5m)
minimum
clearance
Assembly area for mount and
antenna
6 ft.
30ft (9m)
EARTH STATION ANTENNA
4.9 Meter ESA
Azm = Azimuth
direction of mount
20ft (6m)
minimum
clearance
2ft (0.6m)
minimum
clearance
6 ft.
15ft
(4.5m)
minimum
clearance
30ft (9m)
1 ft. 6 in.
30ft (9m) minimum
clearance
on either side of foundation
for crane access
Foundation information are provided in bulletin 237636, please contact ASC Signal.
Soil Bearing Capacity,
2000 lb/ft2 (9770 kg/m2)
Reinforcing Steel,
821 lbs (372 kg)
Concrete Compressive
3000 psi (211 kg/cm2)
Strength,
Foundation Size:
(for specific standard soil and typical design)
Length
12 ft (3.66 m)
Width
12 ft (3.66 m)
Depth
1.5 ft (0.45 m)
Concrete Volume
8 yd3 (6.1 m3)
NOTE: Other typical foundation designs are available. Soil borings and foundation
analysis should be performed by a qualified civil engineer.
4
PBESA49M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation
EARTH STATION ANTENNA
4.9 Meter ESA
Antenna Configurations
Earth Station Antennas
Manual Pedestal Mount.
Motorizable Mount without Az/El Jackscrews.
Motorizable Mount with Az/El Jackscrews.
ES49-1
ES49MP-1
ES49MPJ-1
Ka Band Earth Station Antennas
Manual Pedestal Mount.
Motorizable Mount without Az/El Jackscrews.
Motorizable Mount with Az/El Jackscrews.
ES49KA-1
ES49KAMP-1
ES49KAMPJ-1
Low PIM Earth Station Antennas
Manual Pedestal Mount.
Motorizable Mount without Az/El Jackscrews.
Motorizable Mount with Az/El Jackscrews.
ES49-LP-1
ES49MP-LP-1
ES49MPJ-LP-1
Ka Band Low PIM Earth Station Antennas
Manual Pedestal Mount.
Motorizable Mount without Az/El Jackscrews.
Motorizable Mount with Az/El Jackscrews.
ES49KA-LP-1
ES49KAMP-LP-1
ES49KAMPJ-LP-1
Antenna controller and motorization are detailed in specific bulletins, please contact ASC Signal.
5
PBESA49M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation
EARTH STATION ANTENNA
4.9 Meter ESA
Motor Drive Speed Summary
Motorization and NGC Options
Variable
Azimuth
Elevation
Polarization
0.05o/s
0.05o/s
0.5o/s
0.5o/s
1o/s
Motorization
One motorization system is available for this antenna: the NGC tracking
system that can support Steptrack, Smartrack and Ephemeris orbital tracking.
The NGC-IDU controller can also operate the Sub-Reflector tracking system
SRT-2-49, 2 axis Control Sub-Reflector Carriage, required for Ka application.
Motor Kit
Azimuth/Elevation Motor Kit
NGC-MK5
Azimuth/Elevation Motor Kit , High Accuracy NGC-MK5KA
SRT Kit
2 axis Control Sub-Reflector Carriage
SRT-2-49
Polarization Drive Kit (DC Step Motors)
Standard Temperature (> -20oC)
Low Temperature operation (< -20oC)
NGC-PK9DRA
NGC-PK9DRA-LO
Outdoor Unit Controller (Tracking)
Power 200 - 230 VAC, 3 Phase 50/60 Hz
Power 380 - 460 VAC, 3 Phase 50/60 Hz
Power 200 - 230 VAC, 3 Phase 50/60 Hz ,
High Accuracy
Power 380 - 460 VAC, 3 Phase 50/60 Hz ,
High Accuracy
NGC OUTDOOR INTERFACE FOR SRT
NGC-ODU-208-3
NGC-ODU-380-3
NGC-ODU-208-3-HA
NGC-ODU-380-3-HA
NGC-ODU-SRT
Antenna controller, motorization and options are detailed in specific bulletins, please contact
ASC Signal.
Indoor
NGC-IDU
NGC-108
NGC-109
NGC-111
NGC-115
NGC-ULPC-INTFC
NGC-ULPC-INTFC-2
NGC-119
NGC Rack Mounted Antenna Controller W/LCD
Touch Panel
NGC-IDU Analog Telephone Modem
NGC-IDU Spectrum Analyzer Card, Analog
NGC-IDU DVB Receiver Card
NGC IDU, L-Band Internal Beacon Receiver NGC-IDU Emergency Stop Button
NGC-IDU 10 Mhz Reference Source
NGC-IDU Redundant Power Supply
NGC-IDU Rack Slides
NGC-IDU Step Tracking Software
NGC-IDU Smartrack Software
NGC-IDU Predictive Track Software
NGC-IDU Full Tracking Capability Software
NGC-IDU Remote Access Software Package
NGC-IDU Spectrum Analyzer Enhanced User
Interface
Receive Pattern Test Tool
Redundancy Control Software
Sand/Dust Deviator Feature
Uplink Power Control Software Function
Uplink Power Control System Sincle Channel
Uplink Power Control System Dual Channel
NGC High Availability System Redundancy Software
Outdoor
NGC-201
NGC-202
NGC-205
NGC-206
NGC-207
NGC-211
NGC-AESC
RED11-x
RED12-x
NGC ODU Low Temperature Kit (-40 C)
NGC ODU High Temperature Kit (+60 C)
NGC ODU AC Polarization Drive Interface
NGC Exterior Emergency Stop Button
Pre Movement Alert Warning Light And Announcator
Dual Path NGC Redundancy
Environmental System Controller
Hub Mounted 1:1 LNA/LNB Redundancy Plate
Hub Mounted 1:2 LNA/LNB Redundancy Plate
NGC-001
NGC-002
NGC-003
NGC-004-02
NGC-006
NGC-007
NGC-008
NGC-009
NGC-101
NGC-102
NGC-103
NGC-104
NGC-106
NGC-107
Antenna controller, motorization and options are detailed in specific bulletins, please contact
ASC Signal.
6
PBESA49M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation
EARTH STATION ANTENNA
4.9 Meter ESA
Feed Matrix
C- BAND FEED
SYSTEMS
2CLPNC-49
2CPNC-49-109
2CPNCR-49-109
2CPWCR-49-120
2LPNC-49
2LPNCR-49
2LPUC-49
2LPWC-49
2LPWCR-49
4CPNC-49-206
4LPNC-49
4LPWWC-49
PORT
Co-Pol
2
2
2
2
2
2
2
2
2
4
4
4
X
X- BAND FEED
SYSTEMS
2CPX-49
2CPXF-49-C5
PORT
CP
2
2
X
X
Low PIM X- BAND
FEED SYSTEMS
2CPMX-49
PORT
CP
2
X
CP
LP
RX 3.625 4.2 GHz
X
X
X
X
X
X
X
X
X
X
X
X
X
RX 3.4 4.2 GHz
RX 4.5 4.8 GHz
TX 5.850 6.425 GHz
X
X
TX 5.850
-6.725 GHz
TX 5.725 - TX 6.725 6.725 GHz
7.025 GHz
X
X
X
X
X
X
X
X
X
X
X
X
X
X
RX 7.25 7.75 GHz
X
X
TX 7.9 8.4 GHz
X
X
RX 7.25 7.75 GHz
X
TX 7.9 8.4 GHz
X
X
X
For redundant application, LNA support kits are available for each of the above feeds. Please contact ASC Signal.
7
PBESA49M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation
EARTH STATION ANTENNA
4.9 Meter ESA
Feed Matrix (cont)
Ku- BAND FEED
SYSTEMS
2LPKU-49
PORT
LP
2
X
2LPKUR-49-W
2
X
4LPKU-49-1
4
X
4LPKU-49-2
4
X
4LPKU-49-4
4
X
PORT
LP
2
4
PORT
LP
K- BAND FEED
SYSTEMS
2LPKK-49
4LPKK-49
Ka- BAND FEED
SYSTEMS
4CPMKA-49-206
4
4LPWWKA-49
4
RX 10.7 12.75 GHz
X
TX 12.7513.25 GHz
X
X
TX 13.0 14.5 GHz
TX 13.7514.5 GHz
TX 13.7514.8 GHz
X
X
X
X
X
X
X
CP
RX 17.721.20 GHz
X
X
X
X
X
TX 17.3 18.4 GHz
X
X
RX 10.7 11.7 GHz
X
RX 10.7 12.75 GHz
X
2
4CPWWKA-49
RX 10.95 12.75 GHz
RX 20.2 21.2 GHz
X
TX 27.50 31.00 GHz
X
X
X
X
TX 30.0 31.0 GHz
X
For redundant application, LNA support kits are available for each of the above feeds. Please contact ASC Signal.
8
PBESA49M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation
EARTH STATION ANTENNA
4.9 Meter ESA
Antenna Options and Spares
Anchor Bolt and Template Kits Option
302689
Anchor Bolt and Template Kits
Azimuth and Elevation Cross Axis Waveguide Options
XAPC-49
XAPC-49-UPG
XAPKA-49
XAPKA-49-UPG
XAPKK-49
XAPKK-49-UPG
XAPKU-49
XAPKU-49-UPG
C-Band Cross Axis and Polarization Axis
Waveguide Kit.
C-Band Cross Axis and Polarization Axis
Waveguide Kit Upgrade. Upgrades XAPC-49
for use with 4-Port C-Band Feeds. Provides
Additional Waveguide Run.
Ka-Band Cross Axis and Polarization Axis
Waveguide Kit..
Ka-Band Cross Axis and Polarization Axis
Waveguide Kit Upgrade. Upgrades XAPKA-49
for use with 4-port Ka-Band Feeds. Provides
Additional Waveguide Run.
K-Band cross Axis and Polarization Axis
Waveguide Kit.
K-Band Cross Axis and Polarization Axis
Waveguide Kit Upgrade.Upgrades XAPKK-49 for
use with 4-port K-Band Feeds.
Ku-Band Cross Axis and Polarization Axis
Waveguide Kit. Single run for 2-Port Ku-Band
Feeds.
Ku-Band Cross Axis and Polarization Axis
Waveguide Kit Upgrade. Upgrades XAPKU-49
for use with 4-Port Ku-Band Feeds. Provides
Additional Waveguide Run.
FH49C
C-Band Feed Heater Kit
FH49KA
Ka-Band Feed Heater
FH49KU-K
Ku and K-Band Feed Heater
WEC49R-208-100
Electric Hot Air De-Ice System, 208 VAC, 3 Phase
(not for Ka band)
Electric Hot Air De-Ice System, 380 VAC, 3 Phase
(not for Ka band)
ASC Signal Corporation
1120 Jupiter Road, Suite 102
Plano Texas 75074
USA
Phone: +1-214-291-7654
Fax: +1-214-291-7655
www.ascsignal.com
sales@ascsignal.com
EMRGYLT-115
Emergency Hub Light Kit, 115 VAC
EMRGYLT-230
Emergency Hub Light Kit, 230 VAC
FV65-115
Fan and Vent Kit, 115 VAC
FV65-220
Fan and Vent Kit, 230 VAC
HUBHTR-230
Antenna Hub Heater, 230 VAC
HUBLCNTR-115/240
Hub Power Center, 115/240 VAC
HUBLCNTR-230
Hub Power Center, 230 VAC
HUBLT-115
Hub Light Kit, 115 VAC
HUBLT-230
Hub Light Kit, 230 VAC
Safety Options
ANTGND-5
Foundation Installed Grounding Kit
LRK9
Lightning Rod Kit
OBWRNLT-115
Obstruction Warning Light Kit, 115VAC
OBWRNLT-230
Obstruction Warning Light Kit, 230VAC
Other Options
209906
Azimuth or Elevation Handwheel Kit (2
required)
Lubrication and Maintenance Kit
BRNG-49-KU
Guard, Feed Window Ku-band
FTST
Feed System Testing
TK-MAN-SML
Tool Kit, Small Manual Antennas
TK-MOT-SML
Tool Kit, Small Motorized Antennas
221196
Environment Systems Options
Heating Options
WEC49R-380-100
Hub Equipment Options
PDKA-49-208
PDKA-49-380
PDKU-49-208
PDKU-49-380
Precipitation Deviator Ka-band, 208 VAC, 3
Phase
Precipitation Deviator Ka-band, 380 VAC, 3
Phase
Precipitation Deviator Ku-K-band, 208 VAC, 3
Phase
Precipitation Deviator Ku-K-band, 380 VAC, 3
Phase
9
PBESA49M.B
All designs, specifications, and availabilities of
products and services presented in this bulletin
are subject to change without notice. (0415A)
© 2015 ASC Signal Corporation