Datasheet

AOZ8312
Low Capacitance 2.5 V TVS Diode
General Description
Features
The AOZ8312 is a transient voltage suppressor array
designed to protect high speed data lines from ESD and
lightning.
 ESD protection for high-speed data lines:
This AOZ8312 incorporates twelve low capacitance
steering diodes and a TVS in a single package. During
transient conditions, the steering diodes direct the
transient to either the positive side of the power supply
line or to ground. The AOZ8312 may be used to meet the
ESD immunity requirements of IEC 61000-4-2, Level 4
and IEC 61000-4-5. The TVS diodes provide effective
suppression of ESD voltages: ±30 kV (air discharge) and
±30 kV (contact discharge).
The AOZ8312 comes in a Halogen Free and RoHS
compliant 3.5 mm x 2.5 mm x 0.55 mm DFN-12 package
and is rated over a -40 °C to +85 °C ambient temperature
range. The AOZ8312 is compatible with both lead free
and SnPb assembly techniques. The small size, low
capacitance and high ESD protection makes the
AOZ8312 ideal for protecting high speed video and data
communication interfaces.
Typical Application
– IEC 61000-4-2, level 4 (ESD) immunity test
– ±30 kV (air discharge) and ±30 kV (contact discharge)
– IEC 61000-4-4 (EFT) 40 A (5/50 ns)
– IEC 61000-4-5 (Lightning) 18 A
– Human Body Model (HBM) ±30 kV
 Small package saves board space
 Low insertion loss
 Protects twelve I/O lines
 Low clamping voltage
 Low operating voltage: 2.5 V
 Green product
 Pb-free device
Applications
 Video graphics cards
 Monitors and flat panel displays
 Digital Video Interface (DVI)
 T1/E1 telecom ports
Circuit Diagram
I/O1
I/O2
I/O3
I/O4
1
I/O12
2
3
4
12
GND
1
2
3
4
12
GND
Protection of Twelve Lines
Rev. 1.0 August 2013
www.aosmd.com
Page 1 of 7
AOZ8312
Ordering Information
Part Number
Ambient Temperature Range
Package
Environmental
AOZ8312DI
-40 °C to +85 °C
3.5 mm x 2.5 mm DFN-12
Green Product
AOS Green Products use reduced levels of Halogens, and are also RoHS compliant.
Please visit www.aosmd.com/media/AOSGreenPolicy.pdf for additional information.
Pin Configuration
I/O
1
I/O
2
12
I/O
11
I/O
10
I/O
9
I/O
8
I/O
7
I/O
GND
I/O
3
I/O
4
I/O
5
I/O
6
GND
DFN-12
(Top View)
Absolute Maximum Ratings
Exceeding the Absolute Maximum ratings may damage the device.
Parameter
Rating
Peak Pulse Current (IPP), tP = 8/20 µs
18 A
Peak Power Dissipation (8 x 20 µ[email protected] 25 °C)
160 W
Storage Temperature (TS)
-65 °C to +150 °C
ESD Rating per IEC61000-4-2,
Contact(1)
ESD Rating per IEC61000-4-2, Air
ESD Rating per Human Body
±30 kV
(1)
±30 kV
Model(2)
±30 kV
Notes:
1. IEC 61000-4-2 discharge with CDischarge = 150 pF, RDischarge = 330 Ω.
2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100 pF, RDischarge = 1.5 kΩ.
Maximum Operating Ratings
Parameter
Rating
Junction Temperature (TJ)
Rev. 1.0 August 2013
-40 °C to +125 °C
www.aosmd.com
Page 2 of 7
AOZ8312
Electrical Characteristics
TA = 25°C unless otherwise specified.
Symbol
Parameter
Conditions
Min.
VRWM
Reverse Working Voltage
Between any I/O pin 5 and GND(4)
IR
Reverse Leakage Current
VRWM = 2.5 V, between any I/O pin 5 and GND
Reverse Breakdown Voltage
IT = 100 µA
VBR
VCL
Channel Clamp Voltage
Typ.
Max.
Units
2.5
V
1
µA
2.8
V
(3)
IPP = 2 A, tp = 8/20 µs, any I/O pin to GND
Positive Transients
Channel Clamp Voltage
Junction Capacitance
6.5
V
9
V
3.5
pF
(3)
IPP = 18 A, tp = 8/20 µs, any I/O pin to GND
Positive Transients
Cj
V
IPP = 10 A, tp = 8/20 µs, any I/O pin to GND
Positive Transients
Channel Clamp Voltage
3.5
(3)
VR = 0 V, f = 1 MHz, any I/O pin to Ground
VR = 0 V, f = 1 MHz, between I/O pins
(3)
2.3
1.2
pF
Notes:
3. These specifications are guaranteed by design.
4. The working peak reverse voltage, VRWM, should be equal to or greater than the DC or continuous peak operating voltage level.
5. VBR is measured at the pulse test current IT.
Rev. 1.0 August 2013
www.aosmd.com
Page 3 of 7
AOZ8312
Typical Performance Characteristics
Clampling Voltage vs. Peak Pulse Current
Forward Voltage vs. Forward Current
(IEC6100-4-5 8/20µs pulse current)
10
10
9
9
Forward Voltage (V)
Peak Voltage (V)
(IEC6100-4-5 8/20µs pulse current)
8
7
6
5
4
3
2
8
7
6
5
4
3
0
2
4
6
8
10 12 14
Peak Pulse Current (A)
16
2
18
20
0
2
4
6
8
10 12 14
Forward Current (A)
16
18
20
Capacitance vs. Reverse Bias
Normalized Capacitance
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0
Rev. 1.0 August 2013
0.5
1.0
1.5
2.0
Reverse Bias (V)
www.aosmd.com
2.5
3.0
Page 4 of 7
AOZ8312
Package Dimensions, DFN 3.5mm x 2.5mm x 0.55mm, 12L, EP2
e3
k3
14xb
D
4xb1
12
k1
2xL1
E
3xL3
k2
12xL
2xL2
e
Pin #1 Dot
by Marking
2
1
e1
TOP VIEW
e2
BOTTOM VIEW
A
A1
A2
SIDE VIEW
RECOMMENDED LAND PATTERN
3.60
2.70
1.10
0.60
0.50
0.50
0.13
0.95
3x1.15
1.75
(2.40)
3.05
0.575
2x0.25
1.10
0.50
0.60
1.10
0.13
14x0.20
UNIT: mm
Dimensions in Millimeters
Dimensions in Millimeters
Symbols
A
A1
A2
b
b1
D
E
e
e1
e2
e3
k1
k2
k3
L
L1
L2
L3
Symbols
A
A1
A2
b
b1
D
E
e
e1
e2
e3
k1
k2
k3
L
L1
L2
L3
Min.
0.50
0.00
0.15
0.10
3.40
2.40
0.30
0.25
0.30
0.90
Nom.
0.55
—
(0.15)
0.20
0.20
3.50
2.50
0.50 BSC
0.60 BSC
1.10 BSC
1.10 BSC
(0.20)
(0.30)
(0.13)
0.35
0.30
0.35
1.00
Max.
0.60
0.05
0.25
0.30
3.60
2.60
0.40
0.35
0.40
1.10
Min.
0.020
0.000
Nom. Max.
0.022 0.024
—
0.002
(0.006)
0.006 0.008 0.010
0.004 0.008 0.012
0.134 0.138 0.142
0.094 0.098 0.102
0.020 BSC
0.024 BSC
0.043 BSC
0.043 BSC
(0.008)
(0.012)
(0.005)
0.012 0.014 0.016
0.010 0.012 0.014
0.012 0.014 0.016
0.035 0.039 0.043
Notes:
1. Controlling dimension is millimeter. Converted inch dimensions are not necessarily exact.
2. Tolerance: ±0.05 unless otherwise specified.
3. Radius on all corners is 0.152 max., unless otherwise specified.
4. Package warpage: 0.012 max.
5. No any plastic flash allowed on the top and bottom lead surface.
6. Pad planarity: ±0.102.
7. Crack between plastic body and lead is not allowed.
Rev. 1.0 August 2013
www.aosmd.com
Page 5 of 7
AOZ8312
Tape and Reel Dimensions, DFN 3.5mm x 2.5mm x 0.55mm, 12L, EP2
Carrier Tape
P2
D0
E1
F(III)
3°
Max.
D1
CL
R 0.3
Typical
B0
X
REF.
4.2
REF.
2.2
X
W
T
P0
Y
A0
K0
P1
REF.
3.2
Section Y-Y
REF.
1.7
Feeding Direction
UNIT: mm
Package
DFN
3.5x2.5
A0
2.75
±0.05
B0
3.75
±0.05
K0
D0
D1
W
E1
0.75
1.50
1.00
12.00
1.75
±0.10 +0.1/-0.0 +0.1/-0.0 ±0.30 ±0.10
Reel
F
5.50
±0.05
P0
4.00
±0.10
P1
8.00
±0.10
P2
2.00
±0.05
T
0.25
±0.05
W1
S
K
OPTION 1
M
N
OPTION 2
H
W
UNIT: mm
Tape Size Reel Size
12mm
ø178
M
ø178
±1.0
N
ø54
±0.5
W
17
±2.0
W1
13.5
±0.5
H
ø13
+0.5/-0.2
S
2.2
±0.3
K
10.25
±0.2
Leader / Trailer
& Orientation
Unit Per Reel:
2000 pcs
Trailer Tape
300mm Min.
Rev. 1.0 August 2013
Components Tape
Orientation in Pocket
www.aosmd.com
Leader Tape
500mm Min.
Page 6 of 7
AOZ8312
Part Marking
AOZ8312DI
(DFN-12)
Assembly Location Code
AA0A
Part Number Code
Option Code
YWLT
Year & Week Code
Assembly Lot Code
LEGAL DISCLAIMER
Alpha and Omega Semiconductor makes no representations or warranties with respect to the accuracy or
completeness of the information provided herein and takes no liabilities for the consequences of use of such
information or any product described herein. Alpha and Omega Semiconductor reserves the right to make changes
to such information at any time without further notice. This document does not constitute the grant of any intellectual
property rights or representation of non-infringement of any third party’s intellectual property rights.
LIFE SUPPORT POLICY
ALPHA AND OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body or (b) support or sustain life, and (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of
the user.
Rev. 1.0 August 2013
2. A critical component in any component of a life
support, device, or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
www.aosmd.com
Page 7 of 7