Transient Voltage Suppression Diodes Axial Leaded – 1kA > AK1 series AK1 Series RoHS Pb e4 Description The AK1 series of high power TVS diode is specially designed for meeting severe surge test environment of both AC and DC line protection applications. It features a very fast response and ultra low clamping characteristics over traditional metal oxide ( MOV ) solutions. They can be connected in series and / or parallel to create a very high surge current protection solution. Features Agency Approvals AGENCY AGENCY FILE NUMBER E128662 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit Operating Storage Temperature Range TSTG -55 to 150 °C Operating Junction Temperature Range TJ -55 to 125 ºC Current Rating1 IPP 1 kA • Very low clamping voltage • Ultra compact: less than one-tenth the size of traditional discrete solutions •Sharp breakdown voltage • Low slope resistance • Bi-directional • IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) • Symmetric in leads width for easier soldering during assembly. •E SD protection of data lines in accordance with IEC 61000-4-2 •E FT protection of data lines in accordance with IEC 61000-4-4 • Halogen-free • RoHS compliant • Glass passivated junction • Pb-free E4 means 2nd level interconnect is Pb-free and the terminal finish material is Silver Note: 1. Rated IPP measured with 8/20μs pulse. Functional Diagram Additional Infomarion Bi-direcctional Datasheet Resources Samples Electrical Characteristics (T =25°C unless otherwise noted) A Part Numbers AK1 - 076C Max. Clamping Max. Max. Test Voltage Max. Typical Reverse Breakdown Standoff Agency Temp Reverse Current V @ I Peak Capacitance Approval IR @ Part Voltage CL pp Coefficient Voltage (V ) @ I Leakage BR T IT Pulse Current (IPP) 0 Bias 10kHz Marking (VSO) 85OC OF VBR (IR) @VSO (Note 1) Volts (µA) µA Min Volts Max Volts (mA) VCL Volts IPP Amps (%/OC) (nF) 1-076C 76 10 15 85 95 10 140 1,000 0.1 8.5 X Note: Using 8/20µS wave shape as defined in IEC 61000-4-5. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 Transient Voltage Suppression Diodes Axial Leaded – 1kA > AK1 series Flow/Wave Soldering (Solder Dipping) Physical Specifications Contact manufacturer Weight Case Epoxy encapsulated Terminal Silver plated leads, solderable per MIL-STD-750 Method 2026 Peak Temperature : 265OC Dipping Time : 10 seconds Soldering : 1 time Wave Solder Profile Figure 1 - Non Lead-free Profile Figure 2 - Lead-free Profile 300 300 250 250 TEMPERATURE (ºC) TEMPERATURE (ºC) Maximum Wave 260C Maximum Wave 240C 200 150 100 50 200 150 100 50 0 0 0.5 1 1.5 2 2.5 3 3.5 0 4 0 0.5 1 TIME(MINUTES) 1.5 2 2.5 3 3.5 4 TIME(MINUTES) Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 4 - Typical Peak Pulse Power Rating Curve 1000 100 80 8/20µs 60 40 20 0 0 25 50 75 100 TJ - Initial Junction Temperature (ºC) 125 PPPM-Peak Pulse Power (kW) Percent of Rated Value Figure 3 - Peak Power Derating 100 10/350µs 10/1000µs 10 1 0.00001 0.0001 0.001 td-Pulse Width (sec.) continues on next page. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 Transient Voltage Suppression Diodes Axial Leaded – 1kA > AK1 series Ratings and Characteristic Curves (T =25°C unless otherwise noted) (Continued) A Figure 5 - Typical VBR Vs Junction Temperature Figure 6 - Pulse Waveform 8 IPP – Peak Pulse Current – %IPP Percent of VBR Change 12 10 6 4 2 0 -2 -4 -6 -8 -50 -25 0 25 50 75 100 125 Peak Value 100 tr = rise time to peak value td = decay time to half value tr x td =8/20µs 50 Half Value 0 0 Junction Temperature(Tj ) td tr t – Time (µs) Dimensions A L2 G Dimensions F L1 D C B E C Part Marking System A B C D E F G L1/L2 Inches Millimeters 0.950 +/- 0.040 24.15 +/- 1.00 0.095 +/- 0.024 2.4 +/- 0.60 0.236 +/- 0.039 6.00 +/- 1.00 0.570 max. 14.48 max. 0.050 +/- 0.002 1.270 +/- 0.05 0.500 max. 12.70 max. 0.096 +/- 0.040 2.44 +/- 1.00 L1= L2 tolerance +/- 0.04 inch (1.0 mm) Part Numbering System Marking Code AK1 - XXXX 1-XXXX Stand Off Voltage Series Type LF (Please Refer to Electrical Characteristics Chart) YWW Littelfuse Logo Packing Options Trace Code Marking Y:Year Code WW: Working Week Code Part Number Component Package Quantity Packaging Option AK1-XXXX AK Package 56pcs/Box Bulk AK1-XXXX-12 AK Package 12pcs/Box Bulk Side View © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15