Product Datasheet

AWB7225
860 - 894 MHz
Small-Cell Power Amplifier Module
DATA SHEET - Rev 2.0
FEATURES
• InGaP HBT Technology
• -48 dBc ACPR @ 610 MHz, +27 dBm
• 30 dB Gain
• High Efficiency
• Low Transistor Junction Temperature
• Matched for a 50 Ω System
• Low Profile Miniature Surface Mount Package;
RoHS Compliant
• Multi-Carrier Capability
APPLICATIONS
• LTE, WCDMA, and HSDPA Air Interfaces
14 Pin 7 mm x 7 mm x 1.3 mm
Surface Mount Module
• Picocell, Femtocell, Home Nodes
• Customer Premises Equipment (CPE)
PRODUCT DESCRIPTION
The AWB7225 is a fully matched, Multi-Chip-Module
(MCM) designed for picocell, femtocell, and customer
premises equipment (CPE) applications. Consisting of
two parallel path high linearity, high efficiency power
amplifiers, the device meets the extremely demanding
needs of small cell infrastructure architectures.
Designed for LTE, WCDMA and HSDPA air interfaces
operating in the 860 MHz to 894 MHz bands, the
AWB7225 delivers up to +27 dBm of LTE (E-TM1.1)
Vcc1
RF1 Input
power through an external 90-degree hybrid coupler,
with an ACPR of -48 dBc. The device operates from
a convenient +4.5 V supply and provides 30 dB of
RF gain. The AWB7225 is manufactured using an
advanced InGaP HBT MMIC technology offering
state-of-the-art reliability, temperature stability, and
ruggedness. Its 7 mm x 7 mm x 1.3 mm surface
mount package incorporates RF matching networks
optimized for output power, efficiency, and linearity in
a 50 V system.
Vcc2
Matching
Network
RF Input
Source
Matching
Network
Combined
RF Output
Power
Detector
Bias
Network
90o Hybrid
Coupler
90o Hybrid
Coupler
(external )
RF2 Input
RF1 Output
(external )
Matching
Network
Matching
Network
Bias
Network
Power
Detector
Vref
Detector
Output
Figure 1: Block Diagram
05/2016
RF2 Output
AWB7225
VREF
1
14 GND
GND
2
13 GND
RF2IN
3
12 RF2OUT
VCC1
4
11 VCC2
RF1IN
5
10 RF1OUT
N/C
6
9
GND
DETOUT
7
8
GND
GND
Figure 2: Pinout (X-ray Top View)
Table 1: Pin Description
2
PIN
NAME
1
VREF
Reference Voltage
2
GND
Ground
3
RF2IN
RF2 Input
4
VCC1
Supply Voltage
5
RF1IN
RF1 Input
6
N/C
No Connection
7
DETOUT
Detector Output
8
GND
Ground
9
GND
Ground
10
RF1OUT
11
VCC2
12
RF2OUT
13
GND
Ground
14
GND
Ground
DESCRIPTION
RF1 Output
Supply Voltage
RF2 Output
DATA SHEET - Rev 2.0
05/2016
AWB7225
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN
MAX
UNIT
Supply Voltage (VCC)
0
+5
V
Reference Voltage (VREF)
0
+3.5
V
RF Output Power (POUT) (1)
-
+30
dBm,
modulated
RF Input Power (PIN)
-
+10
dBm, CW
Class 1C
Class IV
-
MSL Rating (4)
4
-
Junction Temperature (TJ)
-
+150
°C
-40
+150
°C
ESD Rating
Human Body Model (2)
Charged Device Model (3)
Storage Temperature (TSTG)
Functional operation is not implied under these conditions. Exceeding any
one or a combination of the Absolute Maximum Rating Conditions may cause
permanent damage to the device. Exposure to absolute ratings for extended
periods of time may adversely affect reliability.
Notes:
(1) At output of external 90° hybrid coupler.
(2) JEDEC JS-001-2010.
(3) JEDEC JESD22-C101D.
(4) 260 °C peak reflow.
Table 3: Operating Ranges
PARAMETER
MIN
TYP
MAX
UNIT
Operating Frequency (f)
860
-
894
MHz
Supply Voltage (VCC)
+3.6
+4.5
+4.65
V
Reference Voltage (VREF)
+2.80
0
+2.85
-
+2.90
+0.5
V
RF Output Power (POUT) (1)
-
+27
-
dBm
Case Temperature (TC) (2)
-40
-
+85
°C
COMMENTS
PA "on"
PA "shut down"
The device may be operated safely over these conditions; however, parametric performance is guaranteed only
over the conditions defined in the electrical specifications.
Notes:
(1) Typ RF Output Power is used during production test.
(2) Case Temperature references the board temperature at the ground paddle on the backside of the package.
3
DATA SHEET - Rev 2.0
05/2016
AWB7225
Table 4: Electrical Specifications
(TC = +25 °C, VCC = +4.5 V, VREF = +2.85 V, 50 Ω system)
PARAMETER
MIN
TYP
MAX
UNIT
27
30
32
dB
-
-48
-57
-45
-54
dBc
12
14
-
%
-
14.5
-
°C/W
-
796
928
mA
Quiescent Current (Icq)
200
270
350
mA
Reference Current
7.5
10
12.5
mA
through VREF pin
Leakage Current
-
3
10
µA
VCC = +5 V, VREF = 0 V
Harmonics (2)
2fO
3fO, 4fO
-
-55
-63
-45
-53
dBc
Input Return Loss (2)
15
20
-
dB
Output Return Loss (2)
15
20
-
dB
-
+35.5
-
dBm
CW tone
Gain (2)
ACPR (1), (2), (3)
@ 10 MHz
@ 20 MHz
Power-Added Efficiency (1), (2), (3)
Thermal Resistance (RJC)
(4)
Supply Current (1), (2), (3)
P1dB
Spurious Output Level
(all spurious outputs)
(2)
Load mismatch stress with no
permanent degradation or failure (2)
Junction to Case
total through VCC pins
-
-
-60
dBc
POUT ≤ +27 dBm
In-band load VSWR < 5:1
Out-of-band load VSWR < 10:1
Applies over all voltage and
temperature operating ranges
8:1
-
-
VSWR
VCC = +4.5 V, POUT = +27 dBm
Applies over full operating
temperature range
Notes:
(1) ACPR and Efficiency measured at 877 MHz.
(2) POUT = +27 dBm, using specified external 908 hybrid couplers.
(3) LTE E-TM1.1 (10 MHz).
(4) Use only VCC2 (pin 11) current when calculating device junction temperature.
4
COMMENTS
DATA SHEET - Rev 2.0
05/2016
AWB7225
APPLICATION INFORMATION
To ensure proper performance, refer to all related
Application Notes on the ANADIGICS web site:
http://www.anadigics.com
Shutdown Mode
The power amplifier may be placed in a shutdown
mode by applying logic low levels (see Operating
Ranges table) to the VREF voltage.
VCC1
VCC2
TVS
Diode
100uF
10uF
0.1uF
1000pF
VREF
5
4
3
13
GND
3
12
RF2OUT
2
1
VCC1
4
11
VCC2
1
2
RF1IN
10
RF1OUT
6
4.7KΩ
0.1uF
100KΩ
AWB7225
5
N/C
6
9
GND
DETOUT
7
8
GND
GND
at slug
10uF
100uF
100uF
DATA SHEET - Rev 2.0
05/2016
50Ω
3
90o Hybrid
Coupler
4
5
RF Output
Notes:
1. Recommended 90o hybrid couplers are muRata LDJ2H825M03FA062A.
2. Applications that have large supply voltage transients may benefit from
the use of TVS diodes. For such applications, recommended TVS diodes
are SM05T1G or SMJ5.0A.
Figure 3: Application Circuit Schematic
5
0.1uF
GND
2
50Ω
DETOUT
14
GND
6
90o Hybrid
Coupler
1
RF2IN
0.1uF
RF Input
1000pF
VREF
TVS
Diode
AWB7225
Figure 4: PCB Footprint
6
DATA SHEET - Rev 2.0
05/2016
AWB7225
PACKAGE OUTLINE
Figure 5: Package Outline - 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module
ANADIGICS logo
Pin 1 Identifier
Part Number
Date Code
YY= Year WW= Work Week
Marking Code
B7225
Figure 6: Branding Specification
7
DATA SHEET - Rev 2.0
05/2016
Lot Number
Country Code
AWB7225
COMPONENT PACKAGING
PIN 1
Figure 7: Tape & Reel Packaging
Table 5: Tape & Reel Dimensions
8
PACKAGE TYPE
TAPE WIDTH
POCKET PITCH
REEL
CAPACITY
MAX REEL DIA
7 mm x 7 mm x 1.3 mm
16 mm
12 mm
2500
13"
DATA SHEET - Rev 2.0
05/2016
AWB7225
ORDERING INFORMATION
ORDER
NUMBER
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
COMPONENT PACKAGING
AWB7225P7
-40 oC to +85 oC
RoHS-compliant 14 Pin
7 mm x 7 mm x 1.3 mm
Surface Mount Module
Loose in Bag
AWB7225P8
-40 oC to +85 oC
RoHS-compliant 14 Pin
7 mm x 7 mm x 1.3 mm
Surface Mount Module
Tape and Reel, 2500 pieces per Reel
AWB7225P9
-40 oC to +85 oC
RoHS-compliant 14 Pin
7 mm x 7 mm x 1.3 mm
Surface Mount Module
Partial Reel
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice.
The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to
change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed
to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers
to verify that the information they are using is current before placing orders.
WARNING
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product
in any such application without written consent is prohibited.
9
DATA SHEET - Rev 2.0
05/2016