DATASHEET Rev. A DCREDUW20 SERIES 4:1 Ultra Wide Input Voltage Range Single and Dual Outputs Standard 2.0” x 1.0” x 0.4” Package 20 Watt DC/DC Power Converters FEATURES • Railway Applications • Single and Dual Outputs • Industry Standard 2.00” x 1.00” x 0.40” Package • 20 Watts Maximum Output Power • 4:1 Ultra Wide Input Voltage Range • High Efficiency up to 89% • 1600VDC I/O Isolation APPLICATIONS • Output Current up to 4.5A • Railway Systems • Positive Logic Remote On/Off • Wireless Networks • Fixed Switching Frequency • Telecom / Datacom • Measurement Equipment • Industry Control Systems • Semiconductor Equipment OPTIONS • Over Voltage, Over Current, and Short Circuit Protection • Ultra Low Quiescent Current • Six-Sided Continuous Shield • CE Mark Meets 2006/95/EC, 93/68/EEC, and 2004/108/EC • Without Trim Pin • Compliant to RoHS EU Directive 2002/95/EC • Without OnOff Pin • UL60950-1, EN60950-1, IEC60950-1, and EN50155 Safety Approvals (Pending) • Negative Logic Remote On/Off DESCRIPTION The DCREDUW20 series of DC/DC power converters provides up to 20 Watts of output power in an industry standard 2.00” x 1.00” x 0.40” package and footprint. This series has single and dual output models with 4:1 ultra wide input voltage ranges of 9-36VDC, 1875VDC, and 43-160VDC. Some features include high efficiency, 1600VDC I/O isolation, six-sided shielding, and positive logic remote ON/OFF. These converters are also protected against over voltage, over current, and short circuit conditions. All models are RoHS compliant and have UL60950-1, EN60950-1, and IEC60950-1, and EN50155 safety approvals (pending). This series is best suited for use in wireless networks, telecom/datacom, measurement equipment, industry control systems, semiconductor equipment, and railway systems. 02/26/2013 Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 5 DCREDUW20 Series Single & Dual Outputs 4:1 Input Voltage Range 20 Watt DC/DC Power Converters Rev. A SPECIFICATIONS: DCREDUW20 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max 9 18 43 24 48 110 36 75 160 50 100 170 9 18 43 Unit INPUT SPECIFICATIONS 24VDC nominal input models 48VDC nominal input models 110VDC nominal input models 24VDC nominal input models 48VDC nominal input models 110VDC nominal input models 24VDC nominal input models 48VDC nominal input models 110VDC nominal input models 24VDC nominal input models 48VDC nominal input models 110VDC nominal input models 24VDC & 48VDC nominal input models 110VDC nominal input models Nominal Vin and full load Input Voltage Range Input Surge Voltage (1 sec max) Start-Up Voltage Shutdown Voltage Input Filter Input Reflected Ripple Current OUTPUT SPECIFICATIONS Output Voltage Low line to high line at full load No load to full load Load Regulation 10% Load to 90% Load Cross Regulation (Dual Outputs) Voltage Accuracy Voltage Adjustability (See Note 5) Output Power Output Current Ripple & Noise (20MHz) Transient Response Recovery Time Measured with a 1µF/50V MLCC 25% load step change Nominal Vin and constant resistive load Minimum Load Temperature Coefficient PROTECTION Over Load Protection Short Circuit Protection Over Voltage Protection GENERAL SPECIFICATIONS Efficiency Switching Frequency Common choke Pi filter 30 Single Output Dual Output Single Output Dual Output Single Output Dual Output -0.2 -0.5 -0.2 -1.0 -0.1 -0.8 -5 -1.0 -10 +0.2 +0.5 +0.2 +1.0 +0.1 +0.8 +5 +1.0 +10 20 % % % % % % W 250 µs Power Up Remote On/Off 30 30 % of full load at nominal input ms % %/°C +0.02 150 Hiccup, automatic recovery See Table Nominal Vin and full load % See Table 330 Input tot Output Input to Case Output tot Case KHz 1600 1000 1000 10 DC/DC ON DC/DC OFF DC/DC ON DC/DC OFF Input Current of Remote Control Pin Remote Off State Input Current ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature (See Note 7) Maximum Case Temperature Storage Temperature Relative Humidity Thermal Shock Vibration Nominal Vin Nominal Vin -0.5 With derating -40 -55 5 Natural Convection Natural Convection with Heatsink BELLCORE TR-NWT-000332 MIL-HDBK-217F PHYSICAL SPECIFICATIONS Weight Case Material Base Material Potting Material Dimensions (L x W x H) Shielding SAFETY & EMC CHARACTERISTICS Safety Approvals (pending) VDC 3000 GΩ pF Open or 3V < Vr < 15V Short or 0V < Vr < 1.2V Short or 0V < Vr < 1.2V Open or 3V < Vr < 15V +1.0 2.5 mA mA +101 +105 +125 95 EN61373, MIL-STD-810F EN61373, MIL-STD-810F 12 10 1,630,000 hours 295,000 hours °C °C °C % RH °C/Watt 1.06oz (30g) Nickel-coated copper FR4 PCB Silicon (UL94-V0) 2.00 x 1.00 x 0.40 inches (50.8 x 25.4 x 10.2 mm) Six-sided EMI (See Note 9) EN55022, EN55011 ESD EN61000-4-2 Radiated Immunity Fast Transient (See Note 10) Surge (See Note 10) Conducted Immunity EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 02/26/2013 mAp-p See Table See Table Isolation Resistance Isolation Capacitance REMOTE ON/OFF (See Note 6) MTBF (See Note 1) VDC 0 -0.02 Isolation Voltage Thermal Impedance (See Note 8) VDC 8 16 40 Asymmetrical load 25%/100% full load Full load an nominal Vin Start-Up Time Negative Logic (optional) VDC See Table Line Regulation Positive Logic (standard) VDC 24VDC & 48VDC nominal input models 110VDC nominal input models Air ±8KV Contact ±6KV 20 V/m ±2KV ±2KV 10 Vrms Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 UL60950-1, EN60950-1, IEC60950-1, EN50155 Class B Class A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Page 2 of 5 DCREDUW20 Series Single & Dual Outputs 4:1 Input Voltage Range 20 Watt DC/DC Power Converters Rev. A MODEL SELECTION TABLES SINGLE OUTPUT MODELS Model Number Input Voltage Range DCRED24S33UW20 Output Current Output Voltage Min. Load Full Load 3.3 VDC 0mA 4500mA Input (2) Current Over Voltage Protection Ripple & Noise (3) Output Power Efficiency (3) Maximum (4) Capacitive Load 6mA 3.7 - 5.4 VDC 75mVp-p 14.8W 85% 7000µF 5.6 - 7.0 VDC DCRED24S5UW20 24 VDC 5 VDC 0mA 4000mA 6mA 75mVp-p 20W 88% 5000µF DCRED24S12UW20 (9 – 36 VDC) 12 VDC 0mA 1670mA 6mA 13.5 - 19.6 VDC 100mVp-p 20W 89% 850µF DCRED24S15UW20 15 VDC 0mA 1330mA 6mA 16.8 - 20.5 VDC 100mVp-p 20W 88% 700µF DCRED48S33UW20 3.3 VDC 0mA 4500mA 4mA 3.7 - 5.4 VDC 75mVp-p 14.8W 85% 7000µF 5.6 - 7.0 VDC 75mVp-p 20W 88% 5000µF DCRED48S5UW20 48 VDC 5 VDC 0mA 4000mA 4mA DCRED48S12UW20 (18 – 75 VDC) 12 VDC 0mA 1670mA 4mA 13.5 - 19.6 VDC 100mVp-p 20W 89% 850µF 15 VDC 0mA 1330mA 4mA 16.8 - 20.5 VDC 100mVp-p 20W 89% 700µF DCRED48S15UW20 DCRED110S33UW20 3.3 VDC 0mA 4500mA 3mA 3.7 - 5.4 VDC 75mVp-p 14.8W 85% 7000µF DCRED110S5UW20 110 VDC 5 VDC 0mA 4000mA 3mA 5.6 - 7.0 VDC 75mVp-p 20W 87% 5000µF DCRED110S12UW20 (43 – 160 VDC) 12 VDC 0mA 1670mA 3mA 13.5 - 19.6 VDC 100mVp-p 20W 88% 850µF 15 VDC 0mA 1330mA 3mA 16.8 - 20.5 VDC 100mVp-p 20W 89% 700µF DCRED110S15UW20 DUAL OUTPUT MODELS Output Current No load (2) Maximum (4) Ripple & Noise (3) Output Power Efficiency (3) Input Current Capacitive Load Min. Load Full Load Input Voltage Range Output Voltage DCRED24D12UW20 24 VDC ±12 VDC DCRED24D15UW20 (9 – 36 VDC) DCRED48D12UW20 48 VDC DCRED48D15UW20 Model Number 0mA ±833mA 6mA 100mVp-p ±15 VDC 0mA ±667mA 6mA 100mVp-p ±12 VDC 0mA ±833mA 4mA 100mVp-p (18 – 75 VDC) ±15 VDC 0mA ±667mA 4mA 100mVp-p DCRED110D12UW20 110 VDC ±12 VDC 0mA ±833mA 3mA DCRED110D15UW20 (43 – 160 VDC) ±15 VDC 0mA ±667mA 3mA 20W 88% ±500µF 20W 89% ±350µF 20W 88% ±500µF 20W 89% ±350µF 100mVp-p 20W 88% ±500µF 100mVp-p 20W 89% ±350µF NOTES 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40°C. MIL-HDBK-217F Notice2 @Ta=25°C, Full load (Ground, Benign, controlled environment). 2. Typical value at nominal input voltage and no load. 3. Typical value at nominal input voltage and full load. 4. Test by minimum Vin and constant resistive load. 5. Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor between the TRIM pin and either the +Vout pin or the –Vout pin. 6. The ON/OFF control pin voltage is reference to –Vin. Positive Logic comes standard and to order negative logic remote on/off add the suffix “R” to the model number. 7. Operating Temperature: These converters can meet the railway T2 and TX temperature requirements. T2: -40°C to +70°C for all models, TX: -40°C to +85 with power derating to 55% output power. (With heatsink the power derates to 70% output power). Test conditions with vertical direction by natural convection (20LFM). 8. Heatsink is optional and P/N: 7G-0020C-F. See “Product Standard Table” on page 5 for ordering information. 9. EN55022 and EN55011 1) 24Vin and 48Vin Models: To meet Class B the modules do not need an external filter. 2) 110Vin Models: To meet Class A the modules do not need an external filter. 10. An external input filter capacitor is required if the module has to meet EN61000-4-4 and EN61000-4-5. The filter capacitor suggested for 24Vin and 48Vin models is Nippon chemi-con KY series, 220μF /100V, ESR 48mΩ. The filter capacitor suggested for 110Vin models is Rubycon BXF series, 100μF /250V. 11. There are several different options available for this series. Please see the “Product Standard Table” on page 4 for all options and ordering information. CAUTION: This power converter is not internally fused. An input line fuse must always be used. Due to advances in technology, specifications subject to change without notice. 02/26/2013 Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 5 DCREDUW20 Series Single & Dual Outputs 4:1 Input Voltage Range 20 Watt DC/DC Power Converters Rev. A DERATING CURVES DCRED48S5UW20 Derating Curve DCRED48S5UW20 Derating Curve with Heatsink (Note 8) CHARACTERISTICS DCRED48S5UW20 Efficiency vs Input Voltage DCRED48S5UW20 Efficiency vs Output Load MECHANICAL DRAWING Unit: inches (mm) PIN CONNECTIONS EXTERNAL OUTPUT TRIMMING PIN SINGLE DUAL 1 +INPUT +INPUT 2 -INPUT -INPUT 3 +OUTPUT +OUTPUT 4 TRIM COMMON 5 -OUTPUT -OUTPUT 6 CTRL CTRL Output can be externally trimmed by using the method shown below. TRIM UP TRIM DOWN 5 4 RU 4 RD 3 PRODUCT STANDARD TABLE 1. Tolerance: x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 2. Pin Pitch Tolerance: ±0.01 (0.25) Suffix No Suffix Negative Remote ON/OFF R Without ON/OFF Pin D Without ON/OFF & Trim Pin G Positive Remote ON/OFF without Trim Pin F Negative Remote ON/OFF without Trim Pin RF Heatsink HS 3. Pin Dimension Tolerance: ±0.01 (0.25) 02/26/2013 Option Positive Remote ON/OFF (standard) Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 5 Rev. A DCREDUW20 Series Single & Dual Outputs 4:1 Input Voltage Range 20 Watt DC/DC Power Converters COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 02/26/2013 (603)778-2300 (888)587-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 5 of 5